Texas Instruments

Display Drivers & Controllers 0.66-inch 4K UHD 2XLVDS DLP® digital micromirror device (DMD) 350-CPGA 0 to 70

Texas Instruments BQ25611D is an I2C-controlled single-cell lithium-ion/lithium-polymer buck battery charger delivering up to 3 A charge current and 1.2 A boost output, with integrated USB BC1.2 detection in a compact QFN package. It supports 4.2 V battery regulation and features a synchronous boost mode for USB OTG power output. Available from stock worldwide with competitive pricing and fast shipping.

The UCC21755-Q1 is an AEC-Q100-qualified, reinforced isolated single-channel gate driver delivering ±10 A peak current for SiC MOSFETs and IGBTs, with integrated active protection, isolated analog sensing, and >100 V/ns CMTI, housed in a wide-body SOIC package.

Texas Instruments TPS565247DRLR is a voltage-mode PWM synchronous buck converter with 3V to 16V input and 5A output current in a SOT-563 6-pin package. Nominal input is 12V with 15-year estimated EOL. Available from stock worldwide with fast shipping.

Use the download button to access the PTH12000WAH schematic symbol, PCB footprint, and 3D model.

Non-Isolated DC/DC Converters 1.2 to 5.5V 6A 12V Input WideAdj Module

Operational Amplifiers - Op Amps Enhanced-product, quad, 40-V 4.5-MHz rail-to-rail input and output (RRIO) operational amplifier

Battery Protection Li-Ion/Li-Pol 6-Pin WSON T/R

Battery Battery Protection IC Lithium Ion/Polymer 6-WSON (1.5x1.5), 1.5V to 28V , 4uA , -40°C ~ 85°C (TA)

LDO Voltage Regulators 300-mA, low-VIN (0.75-V), ultra-low-IQ, low-dropout voltage regulator with enable 6-WSON -40 to 125

TPS7A7401DSDR is a 1.5 A low-dropout linear regulator with programmable soft start and adjustable output. Features 0.15 V typical dropout voltage at 1.5 A and input voltage range from 0.8 V to 6 V. Available in compact 8-pin SON package with RoHS-compliant construction.

Translation - Voltage Levels 8-Bit Dual-Supply Bu s Transceiver A 595-SN74AVC8T245RHLR

The TXU0101QDRYRQ1 is an automotive-grade single-bit fixed-direction voltage-level translator with Schmitt-trigger inputs and 3-state outputs, supporting 1.2 V to 3.6 V translation with 24 mA output drive. AEC-Q100 qualified for automotive use.

Texas Instruments TLV809EA17DBZR is a single-channel voltage supervisor with a 1.7V fixed threshold, active-low push-pull reset output, and manual reset capability in a 3-pin SOT-23 package. Provides reliable power-on reset for low-voltage microcontrollers and processors. Available from stock with worldwide shipping.

Precision Amplifiers Highest-precision, 36-V, 5-MHz, single, low-noise, zero-drift, MUX-friendly amplifier

Power Management Specialized - PMIC Automotive low-emission 36-V push-pull transformer driver with duty cycle control

Current Sense Amplifiers Enhanced product, 40-V, bidirectional, ultraprecise current sense amplifier with picoamp IB & EN

Analog to Digital Converters - ADC Single-channel, 14-bit, 125-MSPS, high-SNR, low-power ADC with SLVDS interface

Non-Isolated PoL Module DC DC Converter 1 Output 0.8 ~ 6V 3A 4.5V - 20V Input , -40°C ~ 125°C

The OPA3681E/250 is a triple current-feedback operational amplifier from Texas Instruments featuring 3 independent channels, bipolar input stage, 7500 µV maximum offset voltage, and a 16-pin SOIC package. It is optimized for high-bandwidth video and communications signal path designs.

Automotive Single-Bit Dual-Supply Bus Transceiver With Configurable Level Shifting

Switching Controllers Wide vin LLC resonant controller with high-voltage start up enabling low standby power 14-SOIC -40 to 125

Use the download button to access the ISOUSB211DPR schematic symbol, PCB footprint, and 3D model.

Use the download button to access the SN74AUP1G80DSFR schematic symbol, PCB footprint, and 3D model.

Analog Switch ICs 18-Bit LVTTL/GTLP Un iv Bus Xcvr A 595-SN74LV4066ARGYR

SINGLE POSITIVE-EDGE-TRIGGERED D-TYPE FLIP-FLOP WITH CLEAR AND PRESET

Automotive, general-purpose, 50-Mbps, six-channel (6/0) digital isolator with robust EMC

Texas Instruments TLV9161SIDBVR is a single rail-to-rail input/output op-amp in a SOT-23-6 package. It delivers 10 MHz bandwidth, up to 16 V supply, 75 dB minimum CMRR, and 1000 µV maximum input offset voltage. Available from stock with worldwide shipping.

TPS6286810CRQYR is a 5.5-V, 4-A synchronous step-down converter from Texas Instruments featuring an I²C interface for programmable output voltage. It supports 2.4-V to 5.5-V input, operates with current-mode PWM and PFM control for high efficiency across load ranges. Available in a compact 1.5-mm x 2.5-mm QFN-9 package for space-constrained designs.

Texas Instruments LM74501-Q1 is an AEC-Q100 automotive-grade reverse polarity protection controller in an 8-pin SOT-23 package. It drives an external N-channel MOSFET for low-loss reverse polarity protection, supporting supply voltages up to 40 V. Available from stock with worldwide shipping.

Switching Voltage Regulators Automotive, 1.5-W, 24-Vin, regulated, 3-kVRMS isolated DC/DC module with integrated transformer</

Gate Drivers 60 V 1000/2000 mA 3-phase gate driver

Supervisor Open Drain or Open Collector 1 Channel SC-70-3 , 2.2V , 45µs , -40°C ~ 125°C (TA)

Shunt Voltage Reference IC Adjustable 1.24V 30 VV ±1.5% 15 mA TO-92-3

Use the download button to access the OPA2863DR schematic symbol, PCB footprint, and 3D model.

Use the download button to access the SN74HCS04BQAR schematic symbol, PCB footprint, and 3D model.

Multiplexer Switch ICs 100-V, flat RON, dual 4:1 multiplexers with latch-up immunity and 1.8-V logic 16-TSSOP -40 to 125

Digital to Analog Converters - DAC 10-bit 2-channel voltage/current output smart DAC with Hi-Z, EEPROM and waveform generator 16-WQFN -40 to 125

SOP, SOP16,.4

Switching Voltage Regulators pwr Cnvtr 150 KHz 1A SD Vtg Reg

Translation - Voltage Levels

Ratiometric unipolar linear hall effect sensor with analog output

Texas Instruments TLV9032QDDFRQ1 is an automotive-grade dual precision push-pull comparator operating from 1.65 V to 5.5 V supply. Features 1500 µV maximum input offset voltage and 5 nA bias current in an 8-pin SOT-23 package. Available from stock with worldwide shipping.

Texas Instruments TPS53319DQPR is a 14 A synchronous buck switching regulator with PWM control and 1.5 V to 22 V input range in a 22-pin WSON package. It delivers high efficiency point-of-load regulation for demanding digital loads. Available in stock with worldwide shipping.

Analog Comparators Automotive, dual, differential, commodity comparator

Digital Isolators Automotive, general-purpose, dual-channel, 1/1 reverse pinout digital isolator 8-SOIC -40 to 125

Use the download button to access the LM393LVQPWRQ1 schematic symbol, PCB footprint, and 3D model.

RF Transceiver 2-transmit 2-receiv e RF-sampling transc

Switching Voltage Regulators 5.5-V 6-A synchronous step-down converter with I C interface in 1.5-mm x 2.5-mm QFN package

LM4663MT/NOPB is a stereo Class D audio amplifier IC delivering 2.1 W per channel with 13 dB gain and 22 kHz bandwidth. It integrates two amplifier channels into a 24-pin TSSOP package for compact portable and consumer speaker applications.