Texas Instruments

LDO Voltage Regulators 200-mA, nanopower-IQ (25 nA), low-dropout (LDO) voltage regulator with enable 5-SOT-23 -40 to 125

IC REG CTRLR PUSH-PULL 8SOIC

Use the download button to access the ISO7741BDWR schematic symbol, PCB footprint, and 3D model.

LDO Voltage Regulators 200-mA, low-dropout voltage regulator with low-IQ & enable 6-WSON -40 to 125

TEXAS INSTRUMENTS - SN74S04N . - Inverter, 74S04, 1 Input, 20 mA, 4.75 V to 5.25 V, DIP-14

LDO Voltage Regulators 250-mA, low-noise, high-PSRR, low-IQ, ultra-low-dropout voltage regulator with low-IQ & enable 4-DSBGA -40 to 125

V62/03642-01XE is a configurable single-gate logic IC from the Texas Instruments LVC family, equivalent to the SN74LVC1G97-EP, in a 6-pin SOT-23 package. It operates from 1.65 V to 5.5 V with 32 mA output sink current and 50 pF load capacitance per output. Suited for space-constrained logic glue, level shifting, and signal conditioning in military and industrial electronics.

Texas Instruments SN74LV8153PW 8-stage Serial-to-Parallel Interface, Serial to Parallel, 20-Pin TSSOP

Specialty Function Logic Emb Test-Bus Cntrl w/8-Bit Id Buses

Use the download button to access the UCC2913DG4 schematic symbol, PCB footprint, and 3D model.

IC PHASE LOCK LOOP HP 14-TSSOP

V62/04734-02XE is a single 2-input OR gate from Texas Instruments in the LVC/LCX logic family, housed in a compact 5-pin SOT-23 package with 32 mA output sink current and 50 pF load capacitance rating. It suits glue logic, signal routing, and low-voltage digital control applications in space-constrained 3.3 V or 5 V boards.

The V62/04620-01YE is a military-grade ACT-family octal bus driver with 3-state outputs in a 20-pin SOIC package, featuring active-low enable control and unidirectional signal flow. It operates at 4.5 V to 5.5 V, provides 24 mA output drive, and is qualified for high-reliability defense and aerospace applications.

V62/04669-02XE is a 14 pins integrated circuit by Texas Instruments. Key specs: 14 pins, Small Outline Packages package, V62/04669-02XE. From quote-based sourcing, in stock checks support worldwide shipping.

Supervisory Circuits Pwr Supply Sequencer & Monitor

Registers 4-By-4 Register Files With Open-Collector Outputs 16-PDIP 0 to 70

UCCx81xA BiCMOS Power Factor Preregulat

The V62/03670-02XE is a 6-function IEEE 1394 differential line transceiver with 6-bit driver width and differential input characteristics, housed in an 80-pin PQFP package for high-speed serial bus interface applications.

ARM Microcontrollers - MCU Tiva C Series Microcontroller

V62/03631-08XE is a fixed-output low-dropout linear regulator from Texas Instruments in a 20-pin PWP package, supporting 2.7 V to 10 V input range with only 169 mV dropout for efficient power delivery.

V62/03624-05XE is a current-mode PWM switching controller supporting boost and flyback topologies, with an input voltage range of 9 V to 12.5 V and pulse-width modulation control. Packaged in SOIC-8, it targets regulated DC-DC converter designs in aerospace and high-reliability applications.

ARM Microcontrollers - MCU IC ARM Cortex-M3 MCU 96K Ind Temp

Low power current mode push-pull PWM with discharge transistor, 12.5/8.3V UVLO, 0°C to 70°C

110-V active clamp current mode PWM controller with N-channel clamp FET and 0.75V CS threshold

Switching Controllers Current Mode PWM Controller 8-CDIP -55 to 125

V62/03610-01XE is a 32-bit floating-point digital signal processor from Texas Instruments in a 144-pin PQFP package, operating at up to 100 MHz with a 24-bit address bus and 32-bit external data bus. It features hardware barrel shifter, boundary scan, and requires an additional 3.3 V supply, targeting high-performance signal processing in aerospace and defense applications.

TXB0102 2-Bit Bidirectional Voltage-Level Translator With Auto Direction Sensing and ±15-kV ESD Protection

Supervisory Circuits Pwr Supply Sequencer & Monitor

Economy low power BICMOS 1MHz current mode PWM with 9.4V/7.4V UVLO and 50% duty cycle, 0C to 70C

12-Rail Power Supply Sequencer and Monitor with ACPI Support

Low-Power BiCMOS Current-Mode PWM

Switching Controllers Low-Pwr Current-Mode Push-Pull PWM

100-μA typical starting supply current • 500-μA t

DGK

500-mA, 10-V, low-IQ, low-dropout voltage regulator with power good & enable

cdip

Economy primary side controller with 10V/8V UVLO, -40C to 85C

The UC1854J is a high power factor preregulator IC from Texas Instruments, designed for current-mode PWM control. It supports input voltages from 15V to 30V and comes in a 16-pin ceramic DIP package, enabling efficient power factor correction in industrial power supplies.

Input Supply Voltage, VIN . . . . . . . . . . . . . . . . . . . . . . . . . . 40V Reference Output Current . . . . . . . . . . . . . . . . . . . . . . . –10mA Driver Output Currents . . . . . . . . . . . . . . . . . . . . . . . . . . –35mA Status Indicator Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . 40V Status Indicator Current . . . . . . . . . . . . . . . . . . . . . . . . . . 20mA

UC2902DG4 is a single-channel voltage-mode load-share controller IC operating up to 20 V, designed to balance current between paralleled power supply modules. It features an adjustable threshold and fits in an 8-pin SOIC package, targeting redundant and distributed power systems in telecom and industrial applications.

Nano-Power Touch Screen Controller with SPI Serial Interface

Run electrical simulations to see important waveforms and circuit performance • Run thermal simulations to understand board thermal performance • Export customized schematic and layout into popular CAD formats • Print PDF reports for the design, and share the design with colleagues

LDO Regulator Pos 1.6V 0.5A 20-Pin HTSSOP EP T/R

The UC1543J/883B is a military-grade power supply supervisory circuit from Texas Instruments in a 16-pin ceramic DIP package. It operates across a -55°C to +125°C temperature range for high-reliability applications. Available from stock with worldwide shipping.

Use the download button to access the UC1706J schematic symbol, PCB footprint, and 3D model.

Advanced 40 VCC, double ended 300kHz voltage mode PWM controller with 45% duty cycle, -55C to 125C

4-Bit Bidirectional Voltage-Level Shifter for Open-Drain and Push-Pull Applications

This TXB0104 4-bit noninverting translator uses two separate configurable power-supply rails. The A port is designed to track VCCA. VCCA accepts any supply voltage from 1.2 V to 3.6 V. The B port is designed to track VCCB. VCCB accepts any supply voltage from 1.65 V to 5.5 V. This allows for universal low-voltage bidirectional translation between any of the 1.2-V, 1.5- V, 1.8-V, 2.5-V, 3.3-V, and 5-V voltage nodes. VCCA must not exceed VCCB.

Switch ICs - Various Auto Audio Accessory Detection

1394 Interface IC Mil Enh 3-Port Cable Xcvr/Arbiter