Texas Instruments

The TCA9555PWR/BKN is a 16-bit I2C/SMBus I/O expander operating from 1.65 V to 5.5 V with interrupt output, weak pull-up resistors, and configuration registers, packaged in a 24-pin TSSOP for embedded system GPIO expansion.

16 MHz MCU with 2KB Flash, 256B SRAM, UART/SPI/I2C, timer

Excellent Output Drive Capability VO = ± 2.5 V Min at RL = 100 Ω,

10-bit, 38-kSPS ADC serial out, on-chip system clock, 11-channel with -40C to 125C temp range

Use the download button to access the REF3112AIDBZR/BKN schematic symbol, PCB footprint, and 3D model.

Analog to Digital Converters - ADC 12-Bit 6MSPS Simult Sampling Quad Ch

E

PowerPAD VSSOP - 1.1 mm max height

Use the download button to access the REF3140AIDBZR/BKN schematic symbol, PCB footprint, and 3D model.

THS10064CDA

1• Operates with a single 3.3 V Supply • Compatible With ISO 11898-2 Standard • Low Power Replacement for the PCA82C250 Footprint • Bus Pin ESD Protection Exceeds ±16 kV HBM

Not recommended

CDCM6208 2:8 Clock Generator, Jitter Cleaner With Fractional Dividers

Logic Gates Triple 3-input NOR gates with Schmitt-trigger inputs 14-TSSOP -40 to 125

Use the download button to access the REF3325AIDBZT/BKN schematic symbol, PCB footprint, and 3D model.

Low Voltage, Low Power, 16-Bit, Mono SoundPlus™ Voice/Modem Codec

1.8-V, 17-µA, microPower, precision, zero-drift CMOS op amp

Use the download button to access the REF3030AIDBZT/BKN schematic symbol, PCB footprint, and 3D model.

Use the download button to access the REF3012AIDBZR/BKN schematic symbol, PCB footprint, and 3D model.

Low-Power and Low-Voltage Stereo CODEC with line-out (H/W Control)

The Texas Instruments MSP430 family of ultra-low-power microcontrollers consist of several devices featuring different sets of peripherals targeted for various applications. The architecture, combined with five low-power modes is optimized to achieve extended battery life in portable measurement applications. The device features a powerful 16-bit RISC CPU, 16-bit registers, and constant generators that contribute to maximum code efficiency. The digitally controlled oscillator (DCO) allows wake-up from l

The Texas Instruments MSP430 family of ultra-low-power microcontrollers consists of several devices featuring different sets of peripherals targeted for various applications. The architecture, combined with five low-power modes, is optimized to achieve extended battery life in portable measurement applications. The device features a powerful 16-bit RISC CPU, 16-bit registers, and constant generators that contribute to maximum code efficiency. The digitally controlled oscillator (DCO) allows wake-up from

High Speed Operational Amplifiers Very Lo-Pwr Current Feedback

IC MCU 16BIT 2KB FLASH 20TVSOP

IC OPAMP JFET 1 CIRCUIT SOT23-5

Operational Amplifiers - Op Amps Gen Purp FET-Input Oper Amplifier

High Speed Operational Amplifiers 250MHz Rail-to-Rail I/O CMOS Quad

OPA2140AIDGKR/BKN

OPA3690IDG4

The LP38692MP-5.0/NOPB/BKN is a fixed 5.0V low dropout linear voltage regulator from Texas Instruments, operating from a wide 2.7V to 10V input voltage range with high output current capability in a 4-pin SOT-223 package. It offers excellent stability and low noise for digital and analog power rails. Available from stock with worldwide shipping.

IC REG LINEAR 2.5V 500MA 8SOIC

Precision Amplifiers Low Power Prec FET-Input Oper Amp

perational performance of the device, use good PCB layout practices, including: • N

Wide Supply: ±2.25 V to ±18 V, 4.5 V to 36 V

IC MCU 16BIT 128KB FLASH 64VQFN

Laser Drivers 11.35Gbps Diff Modulator Drvr

16-bit Microcontrollers - MCU Ultra Lo Pwr MCU

The LM4050WG5.0 is a precision micropower two-terminal shunt voltage reference with a nominal 5 V output guaranteed between 4.987 V and 5.013 V for 0.13% accuracy. It operates with microampere-level quiescent current and is packaged in a 10-lead WSON for miniaturized circuit designs. Suitable for portable instruments, ADC references, and low-power analog signal conditioning.

The TI MSP family of ultra-low-power microcontrollers consists of several devices featuring different sets of peripherals targeted for various applications. The architecture, combined with extensive low-power modes, is optimized to achieve extended battery life in portable measurement applications. The device features a powerful 16-bit RISC CPU, 16-bit registers, and constant generators that contribute to maximum code efficiency. The digitally controlled oscillator (DCO) allows the device to wake up fro

IC MCU 16BIT 8KB FLASH 28TSSOP

The LM5069MM-2/NOPB/BKN is a positive high-voltage hot swap and inrush current controller with integrated power limiting for safe board insertion. It controls an external N-channel MOSFET to limit inrush current and protect downstream circuits during hot-plug events up to 80V. Packaged in a compact MSOP-8 form factor, it suits telecom and industrial power distribution systems.

The LM73CIMK-0/NOPB/BKN is a digital temperature sensor from Texas Instruments operating over -40C to 150C range in a compact TSOT23-6 package. Features I2C interface with 13-bit resolution for precise thermal monitoring. Available from stock with worldwide shipping.

LMR24210TLX/NOPB is a voltage regulator by Texas Instruments. Key specs include Input Voltage-Max: 42 V; Input Voltage-Min: 4.5 V. From RFQ price checks to worldwide shipping, FindMyChip supports sourcing.

Use the download button to access the DAC3283IRGZT/BKN schematic symbol, PCB footprint, and 3D model.

The LM10011SD/NOPB/BKN is a 1% accuracy 4/6-bit VID voltage programmer integrated circuit from Texas Instruments designed for point-of-load regulators with adjustable start-up current control. It supports programmable output voltages via VID codes and provides precise regulation in compact Small Outline No-lead packaging. Available from stock with competitive pricing and worldwide shipping.

LDO Voltage Regulators

Equalizers 3.3-V SMPTE 259M / 344M adaptive cable equalizer 16-SOIC -40 to 85

LM5007MM/NOPB/BKN is a 8 pins power management ic by Texas Instruments. Key specs: 8 pins, Small Outline Packages package, DGK(S-PDSO-G8. From quote-based sourcing, in stock checks support worldwide shipping.

Texas Instruments LM8261M5/NOPB/BKN is a general-purpose single-channel operational amplifier in a compact 5-pin SOT-23 package optimized for low-voltage, space-constrained signal conditioning. It offers rail-to-rail output swing and wide bandwidth suitable for filter and buffer stages. Available in stock with worldwide shipping.

The LM12H458CIVF/NOPB is a 12-bit data acquisition system from Texas Instruments that integrates a high-performance ADC, sample-and-hold, reference, and digital interface in a single IC operating up to 5.5V supply. It delivers a complete signal chain solution for precision analog-to-digital conversion in data acquisition applications. Available in 44-pin PQFP package with worldwide shipping.