Texas Instruments

TEXAS INSTRUMENTS - OPA2211AIDDA . - Operational Amplifier, Dual, 2 Amplifier, 45 MHz, 27 V/µs, ± 2.25V to ± 18V, SOIC, 8 Pins

Texas Instruments DRV8814PWP, Brushed Motor Driver IC, 45 V 1.7A 28-Pin, HTSSOP

DRV83053EPHPRQ1 is an AEC-Q100 qualified three-phase brushless motor gate driver IC designed for automotive applications. It integrates three high- and low-side gate drivers supporting external N-channel MOSFETs with adjustable gate drive current. Available from authorized distributors with worldwide shipping.

TPA6211TDGNRQ1 is an automotive-grade mono class-AB audio amplifier delivering 3.1 W into an 8-ohm load from a single analog input, operating over -40°C to 105°C temperature range in an 8-pin HVSSOP package. It provides 20 kHz audio bandwidth and 105 dB noise figure, suitable for in-vehicle infotainment speakers, navigation audio, and automotive human-machine interface sound output.

TEXAS INSTRUMENTS - TPS542951PWP . - DC/DC Switching Regulator, Synchronous, Dual, 4.5 V to 18 V in, 7 V/2 A out, 700 kHz, HTSSOP-16

LP3907QTLX-VXSS/NOPB is a quad-output PMIC combining synchronous buck converters and LDOs in a 25-ball BGA package. It operates from 2.8 V to 5.5 V input with PWM/PFM dual-mode control for high efficiency. Available from stock with worldwide shipping.

Texas Instruments DS90UB913A-Q1 is an automotive-grade FPD-Link III serializer supporting 10-bit and 12-bit parallel video at 25 MHz to 100 MHz pixel clocks. It transmits video and control data over a single coax or STP cable. Available from stock with worldwide shipping.

TXB0108EPWR is an 8-bit bidirectional voltage-level translator from Texas Instruments with automatic direction sensing, supporting VCCA from 1.2 V to 3.6 V and VCCB from 1.65 V to 5.5 V with ±15 kV ESD protection, packaged in a 20-pin TSSOP for mixed-voltage interface designs.

XTPS563202DRLR is a 3 A synchronous buck converter from Texas Instruments with a 4.5 V to 17 V input range using voltage-mode PWM control, housed in a miniature SOT563 6-pin package for ultra-compact power regulation in portable and IoT applications.

Use the download button to access the SN74HCS21QPWRQ1 schematic symbol, PCB footprint, and 3D model.

Use the download button to access the SN74HCS21PWR schematic symbol, PCB footprint, and 3D model.

TEXAS INSTRUMENTS - TPS70145PWP - LDO Voltage Regulator IC, Fixed, 2 Output, 2.7 V to 6 V in, 170 mV drop, 0.5 A out, HTSSOP-20

Power Management Specialised - PMIC Prog Wide Input Volt Pwr Mngt IC

Use the download button to access the SN74HCS21QDRQ1 schematic symbol, PCB footprint, and 3D model.

LDO Voltage Regulators 200-mA, nanopower-IQ (25 nA), low-dropout (LDO) voltage regulator with enable 5-SOT-23 -40 to 125

XCM6340QRTVRQ1 is an automotive-grade 4-channel 32-bit delta-sigma audio ADC from Texas Instruments with integrated microphone bias, input diagnostics, and up to 14.2 V analog input range, in a 32-pin QFN package. It targets in-vehicle audio capture, voice recognition, and hands-free communication systems requiring AEC-Q100 qualification.

LDO Voltage Regulators 200-mA, nanopower-IQ (25 nA), low-dropout (LDO) voltage regulator with enable 5-SOT-23 -40 to 125

DIP-20

IC GATE DRVR LOW-SIDE 8SOIC

POPA2189IDGKR is a dual 14 MHz zero-drift CMOS precision op-amp from Texas Instruments in an MSOP-8 package. Features 8 µV max offset voltage, 120 dB CMRR, and rail-to-rail output. Available worldwide with fast shipping.

Fixed voltage, 0.5%, 50-ppm/°C precision micropower shunt voltage reference

Use the download button to access the OPA862IDR schematic symbol, PCB footprint, and 3D model.

The CD74HC541EG4 is an 8-bit non-inverting octal buffer and line driver with 3-state outputs in a 20-pin DIP package, operating from 2 V to 6 V. It provides two active-low output enable pins and 25 mA output drive, suitable for CMOS bus buffering and address line driving in 5 V logic systems.

AEC-Q100, 4-Channel, 10-MHz, low-noise, RRIO, CMOS op amp

IC FF D-TYPE SNGL 8BIT 20SOIC

V62/06606-01XE is a Texas Instruments integrated circuit for industrial electronics. It offers 2 pins, supporting reliable assembly in compact electronic equipment. From quote-based pricing, request stock for worldwide shipping.

High Speed Operational Amplifiers 12.6V, Low-noise, single-ended-to-differential, high input impedance amplifier 8-SOIC -40 to 125

IC FF D-TYPE DUAL 9BIT 56SSOP

Use the download button to access the LMR36510ADDAR schematic symbol, PCB footprint, and 3D model.

SN75C1406 is a low-power RS-232 line receiver and driver combination with 3 drivers, operating from a 4.5 V to 15 V supply. It provides EIA-232-compatible output levels with reduced power consumption compared to standard RS-232 transceivers, supporting serial communication interfaces. Packaged in a 16-pin DIP for through-hole serial port designs in embedded and industrial equipment.

IC 20BIT BUS-INTRFC D 56-SSOP

IC BUF NON-INVERT 5.5V 56SSOP

Battery Management 3-Series to 5-Series Stackable Ultra-Low-Power Primary Protector With Autonomous Cell Balancing 24-TSSOP -40 to 85

30V, 0.2A high Performance 500KHz current mode PWM with 8.4V/7.6V UVLO, 100% duty cycle, -40C to 85C

The PTMUX1308QPWRQ1 is an automotive-grade single-channel 8:1 general-purpose analog multiplexer from Texas Instruments with 1.8 V logic control. It supports up to 500 MHz bandwidth, 5.5 V input voltage, and 100 dB off-state isolation in a 16-pin SOIC package. Available from stock with worldwide shipping.

PTMUX1308QDYYRQ1 is a 1-channel, 8:1 general-purpose analog multiplexer from Texas Instruments with 1.8-V logic control, 500 MHz bandwidth, and 5.5 V maximum input. Available in a 16-pin SOIC package with AEC-Q100 automotive qualification for reliable worldwide shipping.

Ethernet ICs Low latency 10/100-Mbps PHY with MII interface and enhanced mode 32-VQFN -40 to 105

SAR ADC, Dual, 750 kSPS, 12 Bit, Simultaneous Sampling

The PTLV6742IDSGR is a dual 10 MHz, low-noise, rail-to-rail output operational amplifier from Texas Instruments with 110 dB typical CMRR. It features a 1000 µV maximum input offset voltage and low-bias architecture in an 8-pin SON package. Available from stock with worldwide shipping.

PTLV9152IDR is a dual rail-to-rail input/output operational amplifier with 4.5 MHz gain-bandwidth, 16 V supply range, 125 dB typical CMRR, and a maximum input offset voltage of 720 µV. The device operates in a low-profile 8-pin SOIC package and targets precision signal conditioning in industrial and consumer applications.

Operational Amplifiers - Op Amps

The XF280025CPMS is a Texas Instruments C2000 32-bit microcontroller from the TMS320 family with 128 KB Flash, FPU, TMU, and CLB programmable logic. It runs at up to 100 MHz and integrates ADC, DAC, and DMA for real-time control applications. Available in a QFP package with worldwide shipping.

Use the download button to access the TLV4011DCKR schematic symbol, PCB footprint, and 3D model.

LDO Voltage Regulators 2-A, low-VIN (1.1-V), low-noise, high-accuracy, ultra-low-dropout (LDO) voltage regulator 12-VQFN-HR -40 to 125

TPS76725QPWPR is a 1 A fixed-output LDO linear voltage regulator with fast-transient response, 230 mV typical dropout voltage, and 2.7 V to 10 V input range. Automotive-qualified in TSSOP-20 package for power-sensitive MCU and DSP supply rails.

Octal Buffers And Line Drivers With 3-State Outputs

Texas Instruments XF280025CPNS is a C2000 32-bit real-time microcontroller with a 100 MHz floating-point unit, trigonometric math unit, 128 KB Flash, and configurable logic block in a QFP package. It integrates high-resolution ADC, DAC, DMA, and JTAG boundary scan for demanding digital power and motor control designs. Available from stock worldwide with fast shipping.

LDO Voltage Regulators 200-mA, nanopower-IQ (200 nA), low-dropout (LDO) voltage regulator with enable 5-SOT-23 -40 to 125

OPA207IDBVT is a low-power, high-precision bipolar rail-to-rail output op-amp with 7.5 nV/√Hz voltage noise, 100 µV maximum offset, 0.2 µV/°C drift, and 350 µA quiescent current, in a 5-pin SOT-23 package for precision instrumentation and portable sensor signal conditioning.

V62/03672-02YE is a military-grade quad voltage comparator from Texas Instruments, equivalent to the LM239A-EP enhanced-plastic device, featuring 4 independent comparator channels with open-collector outputs. It operates from a single 2 V to 36 V supply or a dual ±1 V to ±18 V supply, with an input offset voltage of up to 2500 µV and a maximum bias current of 0.4 µA. Housed in a 14-pin SOIC package, it suits defense, aerospace, and high-reliability industrial threshold-detection circuits.