Texas Instruments

TEXAS INSTRUMENTS - DRV8885PWPR . - Motor Driver, Stepper, 8V to 37V supply, 1A/1 Output, HTSSOP-24

TEXAS INSTRUMENTS - THS7303PWG4 - Video Amplifier, 3 Amplifiers, 35 MHz, 320 V/µs, -40 °C, 85 °C, 70 mA

200-mA, high-PSRR, low-IQ, low-dropout voltage regulator with low-noise & enable

Use the download button to access the TPS76533DR schematic symbol, PCB footprint, and 3D model.

Switching Voltage Regulators Hi Temp 17V,1.5A,Syn Step-Down Converter

TEXAS INSTRUMENTS - OPA2322AIDRGT - Operational Amplifier, Dual, 2 Amplifier, 20 MHz, 10 V/µs, 1.8V to 5.5V, SON, 8 Pins

IC FF D-TYPE DUAL 8BIT 48TSSOP

16-bit Microcontrollers - MCU Ultra low power MCU

V62/07615-01XE is a current-mode PWM switching controller from Texas Instruments in an 8-pin SOIC package. It operates from a 12 V to 18 V input with 15 V nominal for industrial and mil-grade power conversion applications. Available Pb-free with 15-year YTEOL in stock worldwide for long-lifecycle embedded and defense power supply designs.

TEXAS INSTRUMENTS - UC3854BN - PFC Controller IC, 10 V to 20 V & 12 mA Supply, 10 V Lockout, 95 % Duty Cycle, 200 kHz, DIP-16

16-bit Microcontrollers - MCU Ultrasonic Sensing MCU with 256KB FRAM, 8KB RAM, LCD for water meters 100-LQFP -40 to 85

IC CODEC 16BIT DUAL PROG 48-TQFP

IC CODEC 16BIT DUAL PROG 48-TQFP

Texas Instruments V62/06621-01YE is a single-channel LVC/LCX-family logic buffer in a 5-pin SOT-23 package, providing a 32 mA output drive with a 50 pF load capacitance specification and Pb-free construction. It performs signal buffering and line driving for single-wire digital interfaces and level-sensitive logic paths. The compact SOT-23 footprint and low supply voltage compatibility make it suitable for portable electronics, industrial I/O modules, and space-constrained PCB layouts.

The LM22675MRE-5.0/NOPB/BKN is a 4.5V to 42V input, 1A SIMPLE SWITCHER buck converter with precision enable from Texas Instruments, featuring a fixed 5.0V output in a compact surface-mount package. It integrates an internal power switch and offers adjustable switching frequency for flexible inductor selection and noise management. Well-suited for point-of-load DC-DC conversion in automotive, industrial, and telecommunications equipment.

Texas Instruments PTPS78450QDBVRQ1 is an automotive-grade 300 mA, low-dropout linear regulator with a 5.5 V to 6 V input range, 0.2 V typical dropout, and fixed output voltage in a 5-pin SOT-23 package. AEC-Q100 qualified with excellent line regulation of 0.0003% for stable post-regulation in vehicle electronics.

The POPA2202IDR is a dual precision operational amplifier from Texas Instruments featuring ultra-low noise of 0.2 µVPP and 9 nV/√Hz, 148 dB typical CMRR, and heavy capacitive load drive up to 25 nF. It uses super-beta input technology to achieve a 2 µA maximum input bias current in a Small Outline package. Available from stock with worldwide shipping.

PTPS78433QDBVRQ1 is an automotive-grade 300 mA fixed-output low-dropout linear regulator in a 5-pin SOT-23 package, accepting 3.8 V to 6 V input with a maximum dropout voltage of 115 mV. AEC-Q100 qualified with 0.0003% line regulation, it targets ADAS, infotainment, and automotive sensor supply rails.

3V to 6V Input, 3A Synchronous Step-Down SWIFT™ Converter with 1.5V Output

Texas Instruments PUCC21540QDWKRQ1 is an automotive-grade reinforced isolated dual-channel gate driver supporting up to 6A peak output current with 3.3mm channel-to-channel spacing for compact half-bridge designs. Qualified to AEC-Q100 for automotive applications in a 14-pin SOIC package. Available with worldwide shipping.

LDO Voltage Regulators 200-mA, nanopower-IQ (200 nA), low-dropout (LDO) voltage regulator with enable 5-SOT-23 -40 to 125

The PREF4132B33DBVRQ1 is a Texas Instruments automotive-grade 3.3 V precision voltage reference with 12 ppm/°C temperature coefficient, low noise, and low power consumption in a 5-pin SOT-23 package for AEC-Q100-qualified designs. Available from authorized distributors with worldwide shipping.

LDO Voltage Regulators 200-mA, nanopower-IQ (200 nA), low-dropout (LDO) voltage regulator with enable 5-SOT-23 -40 to 125

TEXAS INSTRUMENTS - UCC38C43DG4 . - Current Mode PWM, 18V-12V supply, 1 MHz, 18V/200mA out, SOIC-8

200-mA, nanopower-IQ (200 nA), low-dropout (LDO) voltage regulator with enable

The TS5N118DBQR is a 10 V, 8:1 single-channel general-purpose FET bus switch functioning as an analog multiplexer with 25 MHz bandwidth, housed in a 16-pin SOIC package. It selects one of 8 input lines to a single output, supporting input voltages up to 10 V and enabling low-distortion signal routing in mixed-signal systems. Designed for audio switching, test instrumentation, industrial data acquisition, and communication signal multiplexing applications.

TLV4062DRYR is a dual analog comparator with integrated voltage reference in a 6-SON package from Texas Instruments. It features push-pull outputs, a maximum input offset voltage of 6000 µV, and a bias current of 0.015 µA, operating across -40°C to 125°C. Suitable for compact threshold detection circuits in portable and industrial applications.

LDO Voltage Regulators 200-mA, nanopower-IQ (200 nA), low-dropout (LDO) voltage regulator with enable 5-SOT-23 -40 to 125

LDO Voltage Regulators 200-mA, nanopower-IQ (200 nA), low-dropout (LDO) voltage regulator with enable 5-SOT-23 -40 to 125

Texas Instruments TPS2350DG4, 1-Channel, Hot Swap Controller, Negative Voltage, -48 V 14-Pin, SOIC

Use the download button to access the TLV9101SIDBVR schematic symbol, PCB footprint, and 3D model.

PREF4132B30DBVRQ1 is a integrated circuit for board-level control by Texas Instruments. Key specs: SOT23 (5-Pin), 5 pins, -40°C to 125°C. From inquiry pricing, in stock with worldwide shipping.

Flip Flops Schmitt-trigger input dual D-type negative-edge-triggered flip-flops w/ clear and preset 14-TSSOP -40 to 125

Operational Amplifiers - Op Amps 40-V, dual 3.5MHz, RRO, MUX-friendly operational amplifier for cost-sensitive systems 8-TSSOP -40 to 125

Texas Instruments PTLV9352IPWR is a dual rail-to-rail output operational amplifier with 40 V supply range, 3.5 MHz bandwidth, and MUX-friendly input architecture in an 8-pin SOIC package. It delivers 95 dB minimum CMRR and 2000 µV maximum input offset for cost-sensitive signal conditioning. Ideal for multiplexed ADC front-ends and sensor signal chains in industrial and consumer designs.

ADS8515IDBG4 is a 16-bit successive approximation parallel ADC by Texas Instruments in a 28-pin SSOP package. Key specs: ±10V bipolar input range, 4µs max conversion time, 0.0046% max linearity error. From $15.00, in stock with worldwide shipping.

Analog Front End - AFE 12 Bit 21 MSPS Ult Lo-Pwr Sig Processor

PAMC1300BQDWVRQ1 is an AEC-Q100 automotive reinforced isolated amplifier with ±250 mV differential input, 5000 V isolation, 310 kHz bandwidth, and 0.03% non-linearity in an 8-pin SOIC package for high-accuracy current sensing.

The NS16C2752TVS/NOPB is a dual UART with 64-byte FIFOs and up to 5 Mbit/s data rate from Texas Instruments. It features an 8-bit external data bus, 24 MHz clock, and operates from both 3.3V and 5V supplies in a 48-pin LQFP package. Available from stock with worldwide shipping.

TEXAS INSTRUMENTS - THS1403QPHP - Analogue to Digital Converter, 14 bit, 3 MSPS, Differential, Parallel, Single, 3 V

3.3 V or 2.80 V or Adjustable • Cellular and Smart Phones • 1.6-A, 1.0-A, or 0.8-A, up to

40-V, dual 3.5MHz, RRO, MUX-friendly operational amplifier for cost-sensitive systems

The PDRV8706HRHBQ1 is a 37V automotive H-bridge smart gate driver with inline current sense amplifier from Texas Instruments. It features push-pull output, complementary output polarity, and a standard input interface in a 32-pin QFN package. Available from stock worldwide with competitive pricing for automotive motor control applications.

Processor supervisor with power fail and integrated watchdog timer

LDO Voltage Regulators 200-mA, nanopower-IQ (25 nA), low-dropout (LDO) voltage regulator with enable 5-SOT-23 -40 to 125

QFN-32

Use the download button to access the TPSM82822SILR schematic symbol, PCB footprint, and 3D model.

Switching Controllers 2.5-V to 24-V, 3-, 2-, and 1-phase step-down driverless controller 32-VQFN -40 to 125

IC SCAN TEST DEVICE 18BIT 64LQFP

Use the download button to access the TL16C550DIRHBR schematic symbol, PCB footprint, and 3D model.