Texas Instruments
Texas Instruments (TI) is a global semiconductor company headquartered in Dallas, Texas. TI designs and manufactures analog and embedded processing chips used in industrial, automotive, consumer, communications, and enterprise systems.
41,509
Total Products
126
Categories
All Texas Instruments Components
Showing 9,701–9,750 of 41,509
RS-232 Interface IC 3V-5.5V Sgl-Channel RS232 Line Drvr/Rcvr
Flip-Flops Octal Edge-Trig D-Ty F-F W/3-State Otpt
SN74ALS193ADRG4 is a logic interface IC by Texas Instruments. Key specs: SOIC package, 16 pins, 70°C maximum. From inquiry pricing, in stock with worldwide shipping.
Digital Bus Switch ICs Dual FET Bus Switch
Phase Locked Loops - PLL 3.6 GHz/1.7 GHz PLLatinum Dual High Frequency Synthesizer for RF Personal Communications 20-TSSOP -40 to 85
Buffers & Line Drivers 11-Bit Line/Mem Drv With 3-State Outputs
Texas Instruments SN74ALS652ANTE4 is an octal registered bus transceiver with 3-state outputs in a 24-pin DIP package. Features bidirectional data flow, select input for registered or real-time data, and 50 pF load capacitance. Available from stock with worldwide shipping.
The CD74ACT109M96E4 is a dual positive-edge-triggered J-K flip-flop IC from Texas Instruments with set and reset inputs, operating at up to 100 MHz in a 16-pin SOIC package. It belongs to the high-speed ACT logic family with 24 mA output drive and 50 pF load capacitance rating. Available RoHS-compliant in tape-and-reel format with worldwide distribution.
16-bit Microcontrollers - MCU Capacitive-touch MCU with 16 I/O (64 sensors), 16-KB FRAM, 4-KB SRAM, 27 I/O and 12-bit ADC 32-VQFN -40 to 105
CD74ACT109ME4 is a dual positive-edge-triggered J-K flip-flop with individual set and reset controls in a 16-pin SOIC package, operating at up to 100 MHz clock frequency with 24 mA output sink current. The ACT-family logic is compatible with both CMOS and TTL signal levels for high-speed digital sequencing applications.
SN74ABT5400ADWE4 is an ABT-family unidirectional bus driver with dual output enable in a 28-pin SOIC package, supporting 50 pF load capacitance and active-low enable control. It provides high-speed logic driving for backplane and bus interfaces in digital systems. Suitable for data-bus buffering, address-line driving, and system-level logic interfacing applications.
Audio D/A Converter ICs Stereo DAC w/USB Ifc Hdphn & S/PDIF Otpt
GREEN, PLASTIC, MS-012AA, SOIC-8
Up-Down Converters Down Converter,RF Mixer IC CATV Down Converter 50MHz ~ 280MHz 16-TSSOP
LDO Voltage Regulators 200-mA, nanopower-IQ (200 nA), low-dropout (LDO) voltage regulator with enable 5-SOT-23 -40 to 125
UART Interface IC 1.8V to 5V Dual UART
Octal Buffer/Driver With 3-State Outputs
Up-Down Converters Down Converter
Texas Instruments LM3S2D93-IQC80-A2 is a Stellaris ARM Cortex-M3 32-bit microcontroller running up to 16.384 MHz with ADC, DMA, and JTAG boundary scan in a 100-pin LQFP package. It integrates multiple communication peripherals and supports industrial-temperature operation for embedded control applications. Available worldwide with REACH-compliant status for regulatory-sensitive designs.
The LM3S2D93-IQC80-A2T is a 32-bit ARM Cortex-M3 Stellaris microcontroller from Texas Instruments running up to 16.384 MHz with 67 I/O lines and a PQFP-100 package. It features DMA channels, on-chip ADC, boundary scan, and is designed for industrial connectivity and embedded control applications.
Latches Octal Dtype Transparent Latch
The TLC27M2BIDG4 is a LinCMOS precision dual operational amplifier featuring ultra-low input bias current of 0.06 nA, 65 dB minimum CMRR, and voltage-feedback architecture in an 8-SOIC package, targeting portable instrumentation, sensor signal conditioning, and precision measurement circuits.
Metering Systems on a Chip - SoC Ultra low power Micro Controller
IC CODEC 16BIT DUAL PROG 48-TQFP
Switching Controllers Current-Mode PWM Controller
Gate Drivers Non-Inv High Speed Power Driver
Digital Bus Switch ICs 2.5V 3.3V LO VLTG HI BandwidthBus Switch
DAC1232LCJ-1 is a 12-bit digital-to-analog converter from Texas Instruments with parallel 8-bit input format, 0.05% maximum linearity error, and ceramic DIP-20 package. Provides high accuracy analog output for precision control applications. Available from stock with worldwide shipping.
Texas Instruments DAC1232LCJ/NOPB is a 12-bit digital-to-analog converter with double-buffered input registers, microprocessor-compatible interface, and ±1 LSB linearity error in a ceramic DIP package. Delivers stable analog output for precision control and signal generation applications. Available from stock with worldwide shipping.
Operational Amplifiers - Op Amps Dual, 88 MHz, Low Noise, 1.8V CMOS Input, Decompensated Operational Amplifiers 8-VSSOP -40 to 125
Use the download button to access the TLV4082DBVR schematic symbol, PCB footprint, and 3D model.
PTLV840CADL29DBVR is a low-voltage supervisor IC with an adjustable reset time delay and manual reset capability. It monitors a single supply rail and asserts a reset signal with a programmable delay, housed in a compact 5-pin SOT-23 package for tight PCB layouts.
4-CH LCD Bias w/ Fully Int. Pos. Charge Pump, 3.3V LDO Contr., 1.6A Min. Boost Ilim & Fault Detect
LOW COST ENET PHY INDUSTRIAL
The DAC7800KPG4 is a 12-bit serial-input digital-to-analog converter from Texas Instruments with binary input code and 0.0244% maximum linearity error in a 16-pin DIP package. It offers precision voltage output for control and signal generation tasks. Available in stock with worldwide shipping.
Switching Controllers Current-Mode PWM Controller
Board Mount Temperature Sensors
UART Interface IC 1.8V to 5V Dual UART
Switching Controllers Current-Mode PWM Controller
Texas Instruments LM4873MTEX/NOPB is a dual-channel audio amplifier IC with 20 kHz bandwidth, 1% THD, and 97 dB SNR in a 20-pin SOIC package. Designed for stereo speaker amplification in portable consumer electronics.
Equalisers 4-channel 16-Gbps linear redriver 40-WQFN 0 to 70
V62/06675-01XE is a military-enhanced LinCMOS dual differential comparator with open-drain outputs, 0.03 nA bias current, and 5 mV input offset voltage in an 8-pin SOIC package. It is a MIL-PRF-38535 compliant device operating over a full -55 °C to +125 °C military temperature range. Available from stock with worldwide shipping.
The Texas Instruments DAC1232LCN is a 12-bit digital-to-analog converter with parallel 8-bit input interface and 0.05% maximum linearity error. It features binary input coding and single-function conversion in a 20-pin DIP package. Available from stock with worldwide shipping.
The DAC1232LCJ is a 12-bit digital-to-analog converter with parallel 8-bit binary input interface housed in a 20-pin ceramic DIP package. It provides 0.05% maximum linearity error for precision signal generation. Available from stock with worldwide shipping.
The DAC1232LIN/NOPB is a Texas Instruments 12-bit digital-to-analog converter in a 20-pin DIP package, offering microprocessor-compatible parallel interface with double-buffered input registers and 5 V to 15 V supply range. Available in stock worldwide.
BQ7961x-Q1 Family of 12S, 14S, 16S Precision Automotive Battery Monitor, Balancer and Integrated Hardware Protector with up to SafeTITM-26262 ASIL-D Compliance
Texas Instruments DAC1232LCJ-1/NOPB is a 12-bit digital-to-analog converter with double-buffered latch interface, operating from a single 5V supply and compatible with microprocessor data buses. Provides 12-bit resolution with 1 LSB integral linearity, housed in a ceramic DIP package for reliable operation in legacy industrial systems. RoHS-compliant and available globally for instrumentation and control applications.
The DAC1232LIN is a 12-bit digital-to-analog converter from Texas Instruments featuring parallel 8-bit binary input format in a 20-pin DIP package. It offers 0.05% maximum linearity error for high-precision signal conversion. Available from stock with worldwide shipping.
The TPS3808 family of microprocessor supervisory circuits monitors system voltages from 0.4 V to 5 V, asserting an open-drain RESET signal when the SENSE voltage drops below a preset threshold or when the manual reset ( MR)
The PTLV840NADL29DBVR is a single-channel low-voltage supervisor IC from Texas Instruments with programmable reset time delay. It features an adjustable reset threshold and fits a compact 5-pin SOT-23 package for space-constrained designs. Available from stock with worldwide shipping.
Need Texas Instruments Components?
Get competitive quotes from authorized China distributors
Request a Quote