STMicroelectronics

STMicroelectronics LED8102SXT is an 8-channel LED driver with direct switch control, operating at 5 V supply with 7 mA output current per channel in an HTSSOP-16 package. Ideal for industrial displays and status indicators, this compact driver delivers precise constant-current control across all channels. Available in tape-and-reel packaging for automated assembly with worldwide shipping.

Dual eFuse for 5 V and 12 V rails

STMicroelectronics STLUX325ATR is a digital controller IC for lighting and power conversion featuring up to 6 programmable PWM generators and a 96 MHz PLL for precise timing control. It supports DALI protocol and integrates a 32-bit microprocessor core in a compact 5x5 mm QFN-32 package. Available from authorized distributors worldwide with in-stock inventory and global shipping.

 Advanced power management for ultra-low standby power consumption (under 10 mW at 230 VAC)  Fully integrated primary side constant current output regulation (CC)  650 V embedded HV start-up circuit with zero power consumption.  Quasi-resonant (QR) zero-voltage-switching (ZVS) operation  Accurate and adjustable output OVP with options auto-restart (STCH03) or latched (STCH03L) after fault  Output undervoltage protection (UVP) with auto-restart

Electronic fuse for 12 V line

2-channel interleaved PFC driver with embedded digital inrush current limiter function

Energy Saving Off-line High Voltage Converter

Digital combo multi-mode PFC and time-shift LLC resonant controller for AC and DC input line

Smart primary controller

2.5 A step-down switching regulator

The SRK1001TR is an adaptive synchronous rectification controller from STMicroelectronics designed to drive the secondary-side synchronous rectifier MOSFET in flyback converters. It operates from 3.7 V to 32 V input, detects secondary conduction intervals, and improves converter efficiency by replacing Schottky diodes with low-resistance MOSFETs in power supplies up to 1 A output.

200 mA low quiescent current and low noise LDO

High voltage high and low-side driver

STPMIC02TR is a 25 pins power management ic by STMicroelectronics. Key specs: 25 pins, Quad Flat No-Lead package, Power management IC, 2 E-fuses , 2 switching regulators VQFN 24- pin with EPAD. From quote-based sourcing, in stock checks support worldwide shipping.

STPMIC02 is a 4-channel power management IC from STMicroelectronics integrating 2 electronic fuses and 2 switching regulators in a compact 24-pin QFN package. It provides programmable over-current protection and adjustable threshold control for multi-rail embedded system power architectures. Designed for industrial and IoT platforms requiring integrated power supervision and regulation in a single-chip solution.

STMicroelectronics LD56100DPU175R is a 1 A ultra-low noise, very low dropout fast-transient linear regulator operating from 2.25 V to 5.5 V input. With a 0.22 V typical dropout voltage and excellent 0.006% load regulation, it is ideal for noise-sensitive RF, analog, and precision sensor applications.

2.5 A step-down switching regulator

High efficiency monolithic synchronous step-down regulator

High efficiency monolithic synchronous step-down regulator

The STBLW35TTR is an STMicroelectronics single-output DC-DC switching regulator supporting step-down and step-up conversion from 0.075 V to 18 V input with up to 70 mA output current in a compact 20-pin VFQFPN package for low-power portable applications.

The LNBH30QTR is a low-noise block (LNB) supply and control IC from STMicroelectronics with integrated step-up converter and I2C interface. It operates from 10 V to 17.5 V input and uses PWM control for efficient LNB power delivery. Available in stock worldwide with fast global shipping.

The LDK220C30R is a 200 mA fixed-output LDO linear regulator from STMicroelectronics, offering ultra-low quiescent current, low noise, and a 1 V typical dropout voltage across a 4 V to 13.2 V input range in a compact 5-pin SOT-23 package. It is well suited for always-on battery-powered and noise-sensitive analog supply rails.

200 mA low quiescent current and low noise LDO

STMicroelectronics LDK220C25R is a 200 mA low dropout regulator with ultra-low quiescent current and low noise output in a compact SOT23-5 package, offering 2.5 V input and 14 V maximum input voltage for portable and battery-powered designs.

The LDK220C32R is a 200 mA ultra-low quiescent current LDO linear regulator with low noise output in a compact SOT-23-5 package. It features a fixed 3.2 V output, input voltage range of 4.2 V to 13.2 V, and dropout voltage as low as 1 V. Ideal for battery-powered applications requiring stable, quiet power supply.

200 mA low quiescent current and low noise LDO

Linear Voltage Regulator IC Positive Adjustable 1 Output 200mA 6-DFN (1.2x1.3)

Low input voltage 200 mA ultra low dropout linear regulator

200 mA low quiescent current and high PSRR voltage regulator

Low input voltage 200 mA ultra low dropout linear regulator

300 mA very low quiescent current linear regulator IC with the automatic green mode

STMicroelectronics LDL212PU25R is a 1.2 A, high-PSRR low-dropout linear regulator with a fixed 2.5 V output, 1 V dropout at full load, and input range from 3.5 V to 18 V. It delivers tight line and load regulation in a compact 6-pin SOT-23 package for RF and portable applications.

1.2 A low quiescent current LDO with reverse current protection

The LD56100DPU125R is a 1 A ultra-low dropout, ultra-low noise fixed linear regulator from STMicroelectronics, featuring a 0.55 V dropout voltage and 1.8 V to 5.5 V input range in an 8-pin SOIC package. It delivers 0.006% maximum load regulation and fast transient response for noise-sensitive analog and RF supply rails. Available in tape-and-reel packaging with global stock for rapid worldwide delivery.

The LD56100DPU15R is a 1 A ultra-low noise, very low dropout (VLDO) linear voltage regulator from STMicroelectronics in a DFN-8 package. It features a 0.5 V typical dropout voltage, 2 V to 5.5 V input range, and ultra-low output noise. Available from stock with worldwide shipping.

LD56100DPU185R is a 1A very low dropout (VDO 195 mV typical) fast-transient ultra-low noise fixed-output linear regulator from STMicroelectronics supporting 2.35 V to 5.5 V input. Offered in an 8-pin TSSOP package with worldwide shipping.

LD56100DPU31R is a integrated circuit component by STMicroelectronics. Key specs: 9 pins, standard supplier package, BOM-ready sourcing profile. From RFQ pricing, in stock with worldwide shipping.

The LD56100DPU115R is a 1 A very low dropout linear regulator from STMicroelectronics with a 0.65 V dropout voltage, ultra-low noise output, and fast transient response. It accepts input voltages from 1.8 V to 5.5 V and delivers 1.15 V fixed output, making it ideal for powering noise-sensitive RF and analog circuits.

STMicroelectronics LDL212PU12R is a high PSRR, low dropout linear voltage regulator with 1.2V fixed output, 300mA output current, and 2.5V to 18V input range in a compact SOT-23-5 package.

Automotive-grade silicon carbide Power MOSFET 650 V, 45 A, 55 mOhm (typ., TJ = 25 C) in an HiP247 long leads package

LDL212PV30R is a STMicroelectronics integrated circuit for industrial, embedded, and electronic equipment assemblies. It offers 7-pin configuration, and 1.2 A rating. Available for inquiry-based sourcing with worldwide shipping.

Automotive 1.3 megapixel high-dynamic range image sensor

STMicroelectronics LDL212PU30R is a high-PSRR low-dropout linear regulator delivering a fixed 3 V output at up to 1.2 A from a 4 V to 18 V input, with a typical dropout voltage of 1 V. It provides excellent line regulation of 0.004% and load regulation of 0.018% in a compact 6-pin DFN 3x3 mm package. Available worldwide for noise-sensitive analog and RF power supply designs.

STMicroelectronics SCTWA10N120 is a 1200 V, 10 A N-channel silicon carbide (SiC) MOSFET in a through-hole TO-247 vertical package, optimized for high-efficiency power conversion. Ultra-low switching losses and high-temperature operation up to 175°C make it ideal for industrial inverters and EV charging systems. Available from authorized distributors with worldwide shipping.

The SCTWA40N120G2V-4 is a silicon carbide power MOSFET from STMicroelectronics rated at 1200V and 36A with a 62 mΩ typical on-resistance in an HiP247-4 package. It features a built-in diode and drain case connection for high-efficiency power conversion. Available from stock worldwide with fast shipping.

Automotive 1.3 megapixel high-dynamic range image sensor

STMicroelectronics LDL212D15R is a 1.2 A low-dropout linear voltage regulator with 1.5 V fixed output, low quiescent current, and fast transient response. Compact SOT-23-5 package with worldwide stock and competitive pricing.

VG6640CB1M/1 is an automotive-grade 1.3-megapixel high-dynamic-range CMOS image sensor from STMicroelectronics, featuring 132 dB dynamic range and 60 fps frame rate in a 9.3 × 9 mm BGA package for advanced driver-assistance systems.

The SCT20N170AG is an automotive-grade silicon carbide (SiC) N-channel power MOSFET from STMicroelectronics rated at 1700 V and 43 A with a 64 mΩ typical on-resistance. Housed in the HiP247 package, it is AEC-Q101 qualified for high-voltage EV powertrain and industrial power conversion applications.

SCT1000N170AG is an automotive-grade silicon carbide (SiC) N-channel power MOSFET rated at 1700 V and 7 A with a typical on-resistance of 1.0 Ω. It integrates a built-in diode in a HiP247 through-hole package, optimized for high-efficiency, high-voltage automotive power conversion applications.