Texas Instruments

High Speed Operational Amplifiers 650MHz unity gain stable JFET inp Amp

Current Sense Amplifiers 40-V dual-channel bidirectional ultra

Board Mount Hall Effect / Magnetic Sensors Digital-Switch Hall Effect Sensor

Supervisory Circuits Precision window supervisor for OV & UV monitoring with window watchdog timer & programmable delay 10-VSON -40 to 125

The TPS3899DL30DSER is a single-channel voltage supervisor with open-drain reset output and programmable reset delay in a 6-pin WSON (1.5×1.5 mm) package by Texas Instruments. Key specs: 3.0 V monitoring threshold, manual reset input, 1-channel supervision. Available from stock with worldwide shipping.

Switching Voltage Regulators Dual 3-A USB Type-C charging ports controller with programmable current limit and thermal management 25-VQFN-HR -40 to 125

uSiP-14

Board Mount Current Sensors Automotive, precisio n isolated current

Analog to Digital Converters - ADC 16-bit, 2.048-MSPS, dual-channel, simultaneous-sampling SAR ADC with enhanced SPI 32-VQFN -40 to 125

Switching Voltage Regulators Automotive 2.75-V to 6-V, 1-A step-down converter in a 2mm x 3mm wettable-flanks QFN package//

Inverter IC 1 Channel 6-SON (1.45x1) IC INVERTER 1CH 1-INP 6SON

X577PVHACD is a high-voltage power management integrated circuit by Texas Instruments designed for demanding industrial and automotive applications. Key specs: wide input voltage range up to 60 V, integrated gate drivers, and protection features including overvoltage and thermal shutdown. Available in stock with worldwide shipping for industrial power design projects.

Texas Instruments TPS1HC100B-Q1 is an AEC-Q100 automotive smart high-side switch with 100 mΩ on-resistance and 2.5 A continuous load current in a small-outline package. It integrates overcurrent, overtemperature, and open-load protection with a diagnostic output. Designed for 12 V automotive body-control and industrial load-switching applications.

Texas Instruments LMX2581ESQX/NOPB is a wideband frequency synthesizer with integrated VCO covering up to 3800 MHz, featuring a PLL and clean clock output in a 32-pin WQFN package rated from -40 to 85°C. From $12.50 in stock worldwide shipping.

TPS2013DR is a single-channel N-channel power distribution switch from Texas Instruments rated for 1.5 A continuous current and 2.7 V to 5.5 V input voltage in an 8-pin SOIC package. It provides overcurrent protection and controlled power switching for USB and load-management applications. Available from stock with worldwide shipping.

XMS430FR2111IPW16 is a mixed-signal MSP430 microcontroller with FRAM memory by Texas Instruments. Key specs: 16-bit CPU at up to 16 MHz, 2 KB FRAM, 256 B SRAM, and 16-pin TSSOP package. From $1.50, in stock with worldwide shipping.

Board Mount Hall Effect / Magnetic Sensors Low power (5 Hz, <1 uA), low voltage (up to 5.5V) switch 3-TO-92 -40 to 85

The TLVH431AIDCKT is a precision adjustable shunt voltage reference from Texas Instruments with an output range of 1.24 V to 18 V and up to 80 mA cathode current. It offers tight initial accuracy in a tiny SOT-23-6 (6-pin) RoHS e4 package. Available in tape-and-reel for high-volume automated assembly.

TPA6102A2DGK is a stereo Class AB headphone amplifier IC in an 8-pin VSSOP package. Provides 36 dB gain, 20 kHz bandwidth, and 0.1% THD for clear audio output. From $0.80 in stock worldwide shipping.

Board Mount Hall Effect / Magnetic Sensors Low power (5 Hz, <1uA), low voltage (up to 5.5V) switch 3-TO-92 -40 to 85

XMS430FR2522IPW16 is a mixed-signal MSP430FR2522 series microcontroller by Texas Instruments featuring FRAM-based non-volatile memory. Key specs: 16-bit CPU at up to 16 MHz, 8 KB FRAM, 16-pin TSSOP package. Available from stock with worldwide shipping.

UCD3139ARHAT is a high-performance digital PWM controller IC for power conversion by Texas Instruments. Key specs: up to 3 independent control loops, 12-bit ADC, PMBus/I2C communication interface in a 32-pin QFN package. From $8.50, in stock with worldwide shipping.

Board Mount Hall Effect / Magnetic Sensors Low power (5 Hz, <1 uA), low voltage (up to 5.5V) switch 3-TO-92 -40 to 85

TPS628680ARQYR is a 4 A synchronous step-down DC-DC converter from Texas Instruments with a 2.4 V to 5.5 V input range and I2C programmable output. It integrates current-mode PWM control for fast transient response in a tiny 1.5 mm x 2.5 mm QFN-9 package. Ideal for space-critical portable and wearable power rails.

XPGA902APW is a programmable gain amplifier IC by Texas Instruments in a TSSOP package. Key specs: multiple selectable gain settings, wide supply voltage range, low noise amplification suitable for precision signal chains. From competitive pricing, in stock with worldwide shipping.

XIO2213ZAJ is a 1394b to PCI Express bridge controller IC by Texas Instruments. Key specs: IEEE 1394b FireWire 800 interface, PCI Express x1 bus interface, 3.3 V core supply. Available from stock with worldwide shipping.

TPS9900TPZPRQ1 is an automotive-grade multi-channel LED driver IC by Texas Instruments, housed in a 100-pin PQFP package. Key specs: 20 programmable specs, supports up to 260°C peak reflow, AEC-Q100 qualified for automotive use. From competitive pricing, in stock with worldwide shipping.

TMUX6209RUMR is a dual two-channel 4:1 analog multiplexer with 36V operation, low on-resistance, and 52 MHz bandwidth supporting 1.8V logic control. It handles input signals from -4.5V to 18V for flexible signal routing in precision measurement systems. Available in a 16-pin QFN package for compact mixed-signal PCB designs.

TUSB320RWBR is a USB Type-C configuration channel logic and port control IC from Texas Instruments, supporting USB 2.0 and USB 3.1 data roles in a 12-pin X2QFN package. It manages CC pin detection, DRP/UFP/DFP role selection, and communicates over I2C for host control. Available from stock worldwide with fast shipping.

LDO Voltage Regulators 3-A, low-dropout voltage regulator with power good & enable 5-DDPAK/TO-263 -40 to 125

TM4C1233C3PMIR is a 32-bit ARM Cortex-M4F microcontroller from Texas Instruments running at up to 80 MHz with 32 KB Flash and integrated ADC and DMA channels. It is housed in a 64-pin LQFP 10x10 mm package with boundary scan support for easy production testing. Available from stock with worldwide shipping.

TM4C1236E6PMI7R is a 32-bit ARM Cortex-M4F microcontroller by Texas Instruments running at up to 80 MHz with 128 KB flash memory. Key specs: hardware floating-point unit, integrated ADC, DMA, and JTAG boundary scan in a 64-pin LQFP 10x10 mm package. Available in stock with worldwide shipping.

VSP2566PT is a single-channel consumer signal processing IC by Texas Instruments in a 48-pin LQFP package. Key specs: 48 pins, fine-pitch LQFP (0.30 mm pitch), RoHS-compliant construction. From $2.00, in stock with worldwide shipping.

X777BJDCBD is a specialized integrated circuit by Texas Instruments. Key specs: industrial-grade construction, broad operating temperature range, compact package for embedded designs. Available from stock with worldwide shipping.

X777BEDECBD is an evaluation and development module by Texas Instruments for power management prototyping. Key specs: supports multiple voltage rails, onboard test points, and configurable jumper options. From competitive pricing, in stock with worldwide shipping.

VSP5010PMR is a 2-channel analog image sensor signal processor by Texas Instruments in a 64-pin LQFP package. Key specs: dual-channel CDS/PGA signal chain, fine-pitch LQFP-64 package, and RoHS/Pb-free construction. From $8.50, in stock with worldwide shipping.

Texas Instruments 5962-9957701NXD is an integrated circuit for electronic assemblies. It is specified around 32 pins for matching footprints and electrical requirements. From inquiry pricing with worldwide shipping support.

Enhanced Automotive dual CAN transceiver with Standby

UCC3805PW is a current-mode PWM switching controller by Texas Instruments, operating from a 4 V to 12 V input range with high-speed BiCMOS gate drive in an 8-pin SOIC package. Key specs: current-mode control, up to 1 MHz switching frequency, 1 A peak gate drive. From stock with worldwide shipping.

UCC2813PWTR-5 is a current-mode PWM switching controller by Texas Instruments with 4 V to 11 V input range and internal 5 V reference in an 8-pin SOIC package. Key specs: current-mode control, 10 V nominal input, 500 kHz capable switching frequency. From stock with worldwide shipping.

Use the download button to access the UCC2810DW/2 3D model. You can still request or build the schematic symbol and PCB footprint by using the respective build or request forms on this page.

UCC3809PTR-1 is a current-mode PWM switching controller by Texas Instruments designed for offline and DC-DC power supplies. Key specs: 10 V to 19 V input range, programmable oscillator up to 1 MHz, and low 1 mA startup current. Available from stock worldwide with fast shipping.

Use the download button to access the UCD9246GRGCT 3D model. You can still request or build the schematic symbol and PCB footprint by using the respective build or request forms on this page.