TPS2013DR Texas Instruments Integrated Circuit (Small Outline Packages) In Stock
TPS2013DR is a single-channel N-channel power distribution switch from Texas Instruments rated for 1.5 A continuous current and 2.7 V to 5.5 V input voltage in an 8-pin SOIC package. It provides overcurrent protection and controlled power switching for USB and load-management applications. Available from stock with worldwide shipping.
- Manufacturer
- Texas Instruments
- Package
- Small Outline Packages
- Pin Count
- 8
- Lifecycle
- NOT RECOMMENDED
- Datasheet
- TPS2013DR Datasheet PDF
- Category
- Integrated Circuit
- Price
- From $1.4600(MOQ 1)
- Temp Range
- -40.0°C to 85.0°C
- RoHS
- Compliant
- Lead Time
- 3–7 business days
- Shipping
- DHL Express · Worldwide
What are the key features of TPS2013DR?
- 1.5 A continuous load current rating with integrated overcurrent protection for robust power distribution in 2.7 V to 5.5 V systems
- N-channel MOSFET switch with controlled rise time reduces inrush current spikes when hot-plugging downstream loads
- Single-channel 1:1 configuration in an 8-pin SOIC package simplifies layout for point-of-load power switching
- Enable input allows logic-level control of power delivery, enabling dynamic power management in battery-powered and USB designs
What is TPS2013DR used for?
TPS2013DR is commonly used as a USB port power switch or load switch in notebooks, tablets, and embedded systems where a controlled 5 V, 1.5 A supply must be switched on and off under logic control. Its overcurrent protection and controlled slew rate make it suitable for protecting sensitive peripherals in industrial I/O modules and single-board computers from fault conditions. Battery-powered equipment also benefits from its low 2.7 V minimum input voltage, which allows operation late into a battery discharge cycle.
What are the specifications of TPS2013DR?
| Pbfree Code | Yes |
| Date Of Intro | 1994-12-01 |
| YTEOL | 3.9 |
| Adjustable Threshold | NO |
| Analog IC - Other Type | VOLTAGE SUPERVISOR/RESET IC |
| Input Voltage-Max | 5.5V |
| Input Voltage-Min | 2.7V |
| JESD-30 Code | R-PDSO-G8 |
| JESD-609 Code | e4 |
| Number of Channels | 1 |
| Number of Functions | 1 |
| Package Body Material | PLASTIC/EPOXY |
| Package Shape | RECTANGULAR |
| Package Style | SMALL OUTLINE |
| Peak Reflow Temperature (Cel) | 260 |
| Qualification Status | Not Qualified |
| Supply Current-Max (Isup) | 0.1mA |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 2.7V |
| Supply Voltage-Nom (Vsup) | 3V |
| Surface Mount | YES |
| Temperature Grade | INDUSTRIAL |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Terminal Form | GULL WING |
| Terminal Pitch | 1.27mm |
| Terminal Position | DUAL |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Package | Small Outline Packages |
Compliance & Regulatory
| RoHS Status | Compliant |
| Lead-Free | Yes (Pb-Free) |
| Moisture Sensitivity Level | MSL 1 |
| ECCN | EAR99 |
| HTS Code | 8542.39.00.90 |
| Country of Origin | Mexico |
Where can I find the TPS2013DR datasheet?
TPS2013DR Datasheet DownloadOfficial datasheet from Texas Instruments
What are equivalent replacements for TPS2013DR?
No known alternates. Submit an RFQ and our team can suggest alternatives.
Frequently Asked Questions
What continuous current and input voltage range does TPS2013DR support?
TPS2013DR is rated for 1.5 A continuous load current with an input voltage range of 2.7 V to 5.5 V. This covers standard 3.3 V and 5 V system rails, making it compatible with USB 2.0 port power (500 mA) and higher-current downstream loads up to 1.5 A in embedded computing and consumer electronics designs.
How does TPS2013DR protect downstream loads from overcurrent faults?
TPS2013DR integrates a current-limiting circuit that automatically restricts output current when a fault occurs, preventing damage to downstream circuitry. When the load current exceeds the internal threshold, the device reduces gate drive to limit current to a safe level and may latch off depending on the fault duration, protecting PCB traces, connectors, and attached peripherals without requiring an external fuse for loads up to 1.5 A.
Can TPS2013DR handle hot-plug events in USB applications without causing voltage glitches?
Yes, TPS2013DR features a controlled output rise time that slows the charging of the load capacitance during power-on, limiting inrush current to a manageable level. This controlled slew rate prevents the large current spike that would otherwise occur when a capacitive USB peripheral is hot-plugged into a 5 V rail, keeping system bus voltage stable and avoiding nuisance resets of other devices sharing the same supply rail.
When should TPS2013DR be preferred over a discrete MOSFET for a 5 V load switch?
TPS2013DR integrates the N-channel MOSFET, gate driver, current limiter, and enable logic in a single 8-pin SOIC package, eliminating the need for 4–6 discrete components that a manually designed MOSFET switch would require. For 5 V rails up to 1.5 A, this integration reduces BOM cost, PCB area, and design time compared to a discrete solution, while also providing guaranteed overcurrent protection that is difficult to match precisely with external resistors and comparators.
Related Guides
BQ76942PFBR Battery Monitor Selection and Procurement Guide
Choose BQ76942PFBR by cell count, protection architecture, factory configuration, measurement needs, and a controlled sourcing specification.
Nov 13, 2026
SEP0640Q38CB Surge Protection Board Validation Guide
Validate a SEP0640Q38CB protection network through operating-envelope review, surge-current routing, recovery tests, and assembly checks.
Nov 13, 2026
BQ76942PFBR Battery Monitor Board Validation Guide
Validate BQ76942PFBR cell sensing, current measurement, protection switching, and configuration before releasing a battery-monitor board.
Nov 12, 2026
ECA1JHG220 Power-Rail Filter Design and Validation
Validate a 22 µF, 63 V ECA1JHG220 power-rail filter with droop calculations, startup measurements, ripple checks, and thermal tests.
Nov 11, 2026
Why Buy from FindMyChip
About Texas Instruments
Texas Instruments (TI) is a global semiconductor company headquartered in Dallas, Texas. TI designs and manufactures analog and embedded processing chips used in industrial, automotive, consumer, communications, and enterprise systems.
More from Texas Instruments
| Qty. | Unit Price | Ext. Price |
|---|---|---|
| 1+ | $4.1400 | $4.14 |
| 131+ | $2.2900 | $299.99 |
| 500+ | $1.6500 | $825.00 |
| 1000+ | $1.5600 | $1560.00 |
| 10000+ | $1.4600 | $14600.00 |
In Stock · 24h Response · Worldwide Shipping
Response within 24 hours · Worldwide shipping
“Response time is incredible — usually under 4 hours. They understand that production lines can't wait.”
You May Also Like
ACS770ECB-200U-PFF-T
Allegro Microsystems
Integrated Circuit
ACS770KCB-150U-PFF-T
Allegro Microsystems
Integrated Circuit
MC33901WEF
NXP
Integrated Circuit
MC7808BDTRKG
ON Semiconductor
Integrated Circuit
PA94EC
Apex Microtechnology
Integrated Circuit
AP7315-28SR-7
Diodes Inc.
Integrated Circuit
74HCT245D
Nexperia
Integrated Circuit
CY62256VNLL-70ZXCT
Cypress Semiconductor
Integrated Circuit
EPM7032AETC44-4N
Intel
Integrated Circuit
EPM3512AQC208-10N
Intel
Integrated Circuit
EPM3256ATC144-7N
Intel
Integrated Circuit
EPM3256AQC208-7N
Intel
Integrated Circuit
EPM3256AQC208-10N
Intel
Integrated Circuit
EPM3128ATC100-7N
Intel
Integrated Circuit
EPM1270F256C4N
Intel
Integrated Circuit
EPF8282ATC100-4N
Intel
Integrated Circuit
EPF6016QC208-2N
Intel
Integrated Circuit
EPF6016ATC144-3N
Intel
Integrated Circuit
EPF10K30ATC144-3N
Intel
Integrated Circuit
EPC2TI32N
Intel
Integrated Circuit
EPC2LC20
Intel
Integrated Circuit
EP3SL150F1152C4N
Intel
Integrated Circuit
EP2SGX60DF780C5N
Intel
Integrated Circuit
EP2SGX60CF780C5N
Intel
Integrated Circuit