Texas Instruments

UCC2897AMPWREP is an active-clamp forward PWM controller IC by Texas Instruments, designed for high-efficiency isolated DC/DC power supplies switching up to 1 MHz. Key specs: 8 V to 16 V bias supply, programmable dead-time control, and integrated gate drivers. Available in tape-and-reel TSSOP-16 packaging with worldwide distribution.

Switching Controllers Automotive ultra low standby, flyback controller with integrated HV startup and optocoupler feedback 7-SOIC -40 to 125

UCC27800DRMT is a single-channel, low-side gate driver by Texas Instruments designed for driving SiC and GaN power transistors with fast switching. Key specs: 5 A peak source/sink current, 4 V to 6 V UVLO threshold, 8-pin SOIC package. From stock, in stock with worldwide shipping.

UC2843AQD8RVS is a current-mode PWM controller IC by Texas Instruments with 500 kHz max frequency, 1 A gate drive output, and 8-pin SOIC package for flyback, forward, and boost converter designs. Key specs: fixed-frequency current-mode control, 8 V to 30 V input, -40°C to +85°C. Available in stock worldwide.

UCC28720DR is a primary-side regulation flyback switching controller by Texas Instruments using constant-voltage constant-current control with frequency modulation. Key specs: 9 V to 450 V input range, current/voltage-mode control, 7-pin SOIC package. From stock, in stock with worldwide shipping.

Use the download button to access the UCC28881QDRQ1 3D model. You can still request or build the schematic symbol and PCB footprint by using the respective build or request forms on this page.

UCC27324QDRCT is a dual 4 A gate driver IC for MOSFETs and IGBTs by Texas Instruments. Key specs: 4 A peak source/sink current, 9 ns rise time, 4.5 V to 18 V supply, AEC-Q100 qualified. From $1.50, in stock with worldwide shipping.

UCC28712DR is a primary-side regulation flyback switching controller by Texas Instruments with frequency and amplitude modulation control. Key specs: 9 V to 35 V input range, current/voltage-mode control, 7-pin SOIC package. In stock with worldwide shipping.

UCC2807PWTR-3 is a current-mode PWM switching controller by Texas Instruments with a 4.3 V to 12 V operating range. Key specs: 14-pin SOIC package, pulse-width modulation with cycle-by-cycle current limiting, and internal gate drive output. Available from stock worldwide with competitive pricing for power supply designs.

UC1834J is a single-channel under/overvoltage supervisor by Texas Instruments, operating from a 5 V to 35 V input range with programmable fault alert delay. Key specs: 1 channel, 5 V–35 V input voltage, JESD-30 R-GDIP-T16 package. From stock, available with worldwide shipping.

UCC1803J883B is a current-mode PWM switching controller by Texas Instruments with 4V to 12V input range. Key specs: 10V nominal input, MIL-883B ceramic DIP-8 package, 15-year estimated EOL. From $1, in stock with worldwide shipping.

UCC2805QDRHT is a low-power BiCMOS current-mode PWM controller by Texas Instruments. Key specs: 1 MHz maximum oscillator frequency, 10 mA output drive capability, and 7V to 40V supply range. Available in SOIC packaging for cost-effective, high-volume power supply designs.

UCC2803QDRSV is a high-speed PWM controller IC by Texas Instruments designed for current-mode power supply designs with an oscillator up to 1 MHz and 1 A peak gate drive. Key specs: 8-pin VSON package, 1 MHz maximum switching frequency, 1 A output gate drive current. Available from stock with worldwide shipping.

UCC1805J is a current-mode PWM switching controller by Texas Instruments in a DIP-8 package. Key specs: 4 V to 12 V input voltage range, pulse-width modulation control. Available from stock with worldwide shipping.

UC2907DWTR is a voltage-mode supervisor and reset IC by Texas Instruments with adjustable threshold and 35 V maximum input voltage. Key specs: 1-channel voltage supervision, adjustable threshold, 16-pin SOIC package. From $1.50, in stock with worldwide shipping.

D-Type, Addressable 1 Channel 1:8 IC Standard 16-SOIC

Gate Drivers Reinforced isolation dual-channel gate driver with 3.3-mm channel-to-channel spacing option 14-SOIC -40 to 125

8-ch, 1.65-V to 3.6-V inverters with 3-state outputs

Use the download button to access the UCC25600DR-G 3D model. You can still request or build the schematic symbol and PCB footprint by using the respective build or request forms on this page.

UC3706DW is a dual-channel push-pull MOSFET gate driver IC by Texas Instruments. Key specs: 2 channels, totem-pole outputs, 16-pin SOIC package. From stock with worldwide shipping.

The SN74LV8153PWR-P is a serial-to-parallel interface IC by Texas Instruments in a small outline package operating from 1.65 V to 5.5 V. Key specs: 8-bit parallel output, SPI-compatible serial input, and 24 mA output drive capability. Available from stock worldwide with same-day shipping for digital interface designs.

SN75157P-P2 is a dual differential line receiver from Texas Instruments in a 14-pin DIP package, compliant with RS-422 and RS-485 standards. It features a wide common-mode input range and high-speed data reception up to 10 Mbps for balanced transmission lines. Available from stock worldwide with fast shipping.

UC28023DW is a PWM switching controller by Texas Instruments supporting current-mode and voltage-mode control with a 9 V to 12 V input voltage range. Key specs: 15 V nominal input, 16-pin SOIC package, configurable peak or average current mode. From $1.20, in stock with worldwide shipping.

UC28025DWR is a current/voltage-mode PWM switching controller by Texas Instruments with configurable peak or average current mode. Key specs: 9 V to 15 V input, 16-pin SOIC package, supports peak and average current control. From stock with worldwide shipping.

5962-0151201VPA is a dual-channel MOSFET gate driver buffer IC by Texas Instruments. Key specs: 2 channels, totem-pole output, standard input characteristics, 8-pin ceramic DIP package. From competitive pricing, in stock with worldwide shipping.

Texas Instruments SN74LV541APWR-P is an octal buffer and line driver with 3-state outputs operating from 2 V to 5.5 V supply. Supports 8 channels with propagation delay under 7 ns and 24 mA drive capability. Available in TSSOP-20 package with worldwide distribution.

Use the download button to access the UC2524AQDWRDL 3D model. You can still request or build the schematic symbol and PCB footprint by using the respective build or request forms on this page.

UC1856J883B is a current-mode PWM switching controller by Texas Instruments, supporting input voltages from 8 V to 40 V. Key specs: 15 V nominal input, 40 V maximum input, 34 verified parameters. From $1.00, in stock with worldwide shipping.

5962-8680601VEA is a military-grade current-mode PWM switching controller by Texas Instruments. Key specs: 8 V to 40 V input voltage range, configurable current-mode operation with pulse width modulation. From competitive pricing, in stock with worldwide shipping.

SN74LS47NS

5962-8670410VPA is a military-grade current-mode PWM switching controller by Texas Instruments. Key specs: 12 V to 25 V input range, current-mode control with PWM regulation, 8-pin ceramic DIP package. In stock with worldwide shipping.

5962-8951105VEA is a military-grade voltage-mode PWM switching controller by Texas Instruments. Key specs: 8 V to 35 V input range, 16-pin ceramic DIP package, voltage-mode pulse width modulation control. From competitive price, in stock with worldwide shipping.

UC1832J883B is a single-channel analog power management IC with programmable under- and over-voltage fault alert by Texas Instruments. Key specs: 4.5 V to 40 V input range, 1 fault output channel in a ceramic DIP-14 (GDIP-T14) military-grade package. Available RoHS-compliant from authorized distributors with worldwide shipping.

Translation - Voltage Levels Four channel unidirectional level shifter 12-X2QFN -40 to 125

TSB81BA3EZAJ is a 6-bit differential line transceiver by Texas Instruments. Key specs: 3 functions, differential I/O, 168-pin BGA package, minimum output swing 0.172 V. From stock, available with worldwide shipping.

TXB0104QPWRDL is a 4-bit bidirectional voltage-level translator by Texas Instruments supporting 1.2 V to 3.6 V on port A and 1.65 V to 5.5 V on port B. Key specs: 4 channels, automatic direction sensing, 24 mA drive strength, 14-pin TSSOP package. From stock with worldwide shipping.

TUSB214QRWBTQ1 is an automotive-grade USB 2.0 signal conditioner by Texas Instruments designed to extend USB High-Speed links up to 480 Mbps over longer or lower-quality cables. Key specs: single-channel, AEC-Q100 qualified, 12-pin QFN package with e4 moisture rating. In stock with worldwide shipping.

Analog Switch ICs 0.65-Ohm Dual SPDT A na Switch

Use the download button to access the TPS259461ARPWR schematic symbol, PCB footprint, and 3D model.

Switching Voltage Regulators 4.2-V to 60-V input, 1-V to 6-V output, 0.6-A step-down module in 5-mm x 5.5-mm x 4-mm QFN

LED Lighting Driver ICs High-brightness LED matrix manager for a

TUSB1042RNQR is a USB 3.1 Gen 1 2-port linear redriver IC by Texas Instruments that re-equalizes and re-amplifies SuperSpeed USB signals up to 5 Gbps. Key specs: dual-channel re-drive with up to 4 dB gain, 3.3 V single supply, and <1 ns propagation delay. Available in a compact 16-pin WQFN package with worldwide distribution.