Texas Instruments

Switching Voltage Regulators 60-mA 5.5V Buck/ Boost Charge Pump

The UCC5320ECD is a single-channel isolated gate driver from Texas Instruments providing 2A source and 2A sink current for IGBT and MOSFET switching. It features differential inputs, built-in UVLO and transient protection, and supports bipolar or split-output gate drive configurations. Available in 8-pin SOIC package, in stock with worldwide shipping.

Power Switch ICs - Power Distribution Dl .7A 2.7-5.5V HiS

Power Switch ICs - Power Distribution DUAL HI-SIDE MOSFET

Texas Instruments MSP430F5658IZQWR is a 16-bit mixed-signal MCU with up to 32 MHz CPU clock, integrated ADC, DAC, DMA, and USB, operating from 1.8 V at 8 MHz. Housed in a BGA package with boundary scan, it targets ultra-low-power metering and sensor applications.

MSP430F53xx Mixed Signal Microcontroller

MSP430F563x Mixed Signal Microcontroller

Ultra-Low Power MSP430 1.8V Split-Rail I/O

Texas Instruments MSP430F5152IRSBT, 16bit MSP430 Microcontroller, MSP430, 25MHz, 16 kB Flash, 40-Pin WQFN

MSP430F530x Mixed Signal Microcontroller

Analog Switch ICs Sgl-Pole Double- Throw Analog Sw

MSP430F532x Mixed Signal Microcontroller

SN65C1168EPWG4 is a dual RS-422 line transceiver from Texas Instruments with 2 drivers and 2 receivers in a 16-pin TSSOP package, featuring differential Schmitt-trigger inputs and EIA-422-B / TIA-422-B compliance for noise-immune long-distance serial data communication in industrial systems.

MCU 16-bit MSP430 MSP430 RISC 256KB Flash 2.5V/3.3V 80-Pin LQFP T/R

74LVC16373ADGGR is a 16-bit transparent D-type latch with 3-state outputs by Texas Instruments, operating from a 1.65 V to 3.6 V supply with outputs tolerant up to 5.5 V for mixed-voltage bus interfaces. The 48-pin TSSOP package provides two independently controlled 8-bit latch banks for address/data bus buffering. Available from stock with worldwide shipping.

25MHz MCU with Two 16-bit High Res Timers, 32KB flash, 2KB RAM, 16-channel Comparator

Mixed Signal Microcontroller

High Accuracy 3.3 V or 5 V Ratiometric Unipolar Hall Effect Sensor Family

RS-422 Interface IC Dual Diff Drivers & Receivers

Dual Monolithic CMOS 12-Bit Multiplying Digital-to-Analog Converter

I2C/SMBus GPIO Expander 400kHz 5.5V 24-Pin TSSOP Tube

Dual Transmitter/Receiver RS-422 16-Pin TSSOP T/R

±250 mV-Input Reinforced Isolated Amplifier with High CMTI for Current Sensing

106dB SNR Stereo DAC (S/W Control)

The 74LVC1G3157DRLRG4 is a single-pole double-throw (SPDT) analog switch from Texas Instruments with 340 MHz bandwidth, 57 dB off-state isolation, and 1.65 V to 5.5 V supply compatibility. Housed in a ultra-compact 6-pin SOT-563 package for portable signal routing designs. From $0.30 in stock with worldwide shipping.

LDO Regulator Pos 2.5V 0.15A 5-Pin SOT-23 T/R

Texas Instruments OPA2846IDRG4 is a dual wideband, low-noise voltage-feedback operational amplifier with 110 dB typical CMRR, 760 µV maximum input offset voltage, and 8-pin SOIC package. Designed for high-speed signal amplification and precision analog signal chains with worldwide availability.

High Speed Operational Amplifiers Dual Wdebnd Lo-Noise Vltg-Feedback

Flip Flop D-Type Bus Interface Pos-Edge 1-Element 20-Pin SOIC T/R

20ppm/°C Max, 100µA, SOT23-3 Series Voltage Reference

SOIC-8

OP Amp Dual GP ±22V/44V 8-Pin SOIC T/R

NOR Gate 3-Element 3-IN CMOS 14-Pin SOIC T/R

Power Switch ICs - Power Distribution 2.2A 2.7-5.5V Sngl Hi-Side MOSFET

NOR Gate 3-Element 3-IN CMOS 14-Pin TSSOP Tube

XDAC80508ZRTET is an 8-channel true 16-bit SPI voltage-output DAC with a precision internal reference delivering up to 11 V analog output in a 16-pin QFN package. It provides 0.0015% maximum linearity error for high-accuracy analog control applications. Available in stock with worldwide shipping.

High Accuracy 3.3 V or 5 V Ratiometric Unipolar Hall Effect Sensor Family

High Accuracy 3.3 V or 5 V Ratiometric Unipolar Hall Effect Sensor Family

OR Gate 1-Element 2-IN CMOS 5-Pin SC-70 T/R

24-Bit 40kSPS 10-Ch Delta-Sigma ADC w/ PGA, VREF, 2x IDACs, and AC Excitation for Factory Automation

Flip Flop D-Type Bus Interface Pos-Edge 1-Element 20-Pin SOIC Tube

Texas Instruments SN74HC273DWE4 is an 8-bit D-type positive-edge-triggered flip-flop with asynchronous clear, operating up to 21 MHz from 2 V to 6 V supply. Available in a 20-pin SOIC package for bus register and data pipeline applications.

Flip Flop D-Type Bus Interface Pos-Edge 1-Element 20-Pin SOIC T/R

Quad Receiver RS-422/RS-423 Automotive 16-Pin CDIP Tube

20ppm/°C Max, 100µA, SOT23-3 Series Voltage Reference

Buffer/Line Driver 8-CH Inverting 3-ST CMOS 20-Pin TSSOP T/R

Buffer/Line Driver 8-CH Inverting 3-ST CMOS 20-Pin PDIP Tube

Bus XCVR Single 8-CH 3-ST 20-Pin SOIC T/R

Use the download button to access the CD4521BEG4 schematic symbol, PCB footprint, and 3D model.

±250 mV-Input Reinforced Isolated Amplifier with High CMTI for Current Sensing