SN74HC273DWE4 Texas Instruments Integrated Circuit (Small Outline Packages) In Stock

Texas Instruments SN74HC273DWE4 is an 8-bit D-type positive-edge-triggered flip-flop with asynchronous clear, operating up to 21 MHz from 2 V to 6 V supply. Available in a 20-pin SOIC package for bus register and data pipeline applications.

OBSOLETEIntegrated CircuitVerified May 2026
Package / Visual Reference
SN74HC273DWE4Small Outline Packages
Quick Facts
Manufacturer
Texas Instruments
Package
Small Outline Packages
Pin Count
20
Lifecycle
OBSOLETE
Category
Integrated Circuit
Temp Range
-40.0°C to 85.0°C
RoHS
Compliant
Lead Time
3–7 business days
Shipping
DHL Express · Worldwide

What are the key features of SN74HC273DWE4?

  • 8-bit parallel register with asynchronous clear for simultaneous reset of all flip-flop outputs
  • 21 MHz maximum toggle frequency from 2 V to 6 V supply covering 3.3 V and 5 V logic systems
  • HC/UH family with 50 pF load capacitance spec for reliable driving of standard bus lines
  • 20-pin SOIC package enabling high board density in data register and latch arrays

What is SN74HC273DWE4 used for?

The SN74HC273DWE4 serves as an 8-bit bus register in microprocessor data bus interfaces, output port latches for GPIO expanders, and pipeline registers in FPGA-to-peripheral bridging circuits. Its positive-edge-triggered D flip-flop architecture with asynchronous active-low clear allows deterministic reset of all 8 bits simultaneously during system power-up or fault recovery. The HC family's 2 V to 6 V supply range makes it compatible with both 3.3 V CMOS and 5 V TTL-level logic environments.

What are the specifications of SN74HC273DWE4?

YTEOL0
Additional FeatureDUMMY VAL
FamilyHC/UH
JESD-30 CodeR-PDSO-G20
JESD-609 Codee4
Load Capacitance (CL)50pF
Logic IC TypeD FLIP-FLOP
Max Frequency@Nom-Sup21000000Hz
Max I(ol)0.004A
Number of Bits8
Number of Functions1
Output PolarityTRUE
Package Body MaterialPLASTIC/EPOXY
Package Equivalence CodeSOP20,.4
Package ShapeRECTANGULAR
Package StyleSMALL OUTLINE
Packing MethodTUBE
Peak Reflow Temperature (Cel)260
Prop. Delay@Nom-Sup40ns
Propagation Delay (tpd)200ns
Qualification StatusNot Qualified
Supply Voltage-Max (Vsup)6V
Supply Voltage-Min (Vsup)2V
Supply Voltage-Nom (Vsup)5V
Surface MountYES
TechnologyCMOS
Temperature GradeINDUSTRIAL
Terminal FinishNICKEL PALLADIUM GOLD
Terminal FormGULL WING
Terminal Pitch1.27mm
Terminal PositionDUAL
Time@Peak Reflow Temperature-Max (s)30
Trigger TypePOSITIVE EDGE
fmax-Min25MHz
PackageSmall Outline Packages

Compliance & Regulatory

RoHS StatusCompliant
Lead-FreeYes (Pb-Free)
Moisture Sensitivity LevelMSL 1
HTS Code8542.39.00.60

Where can I find the SN74HC273DWE4 datasheet?

SN74HC273DWE4 Datasheet Download

Official datasheet from Texas Instruments

What are equivalent replacements for SN74HC273DWE4?

Compatible alternatives and drop-in replacements for SN74HC273DWE4:

SN74HC273DWRG4Texas Instruments D

Flip-Flop, HC/UH Series, 8-Func, Positive Edge Triggered, 8-Bit, True Output, CMOS, PDSO20

View Part →
SN74HC273DWG4Texas Instruments

D Flip-Flop, HC/UH Series, 1-Func, Positive Edge Triggered, 8-Bit, True Output, CMOS, PDSO20

View Part →

Frequently Asked Questions

At what maximum clock frequency can SN74HC273DWE4 reliably toggle in a 5 V system?

At a 5 V supply, the SN74HC273DWE4 is rated for a maximum clock frequency of 21 MHz with a 50 pF load capacitance, sufficient for most parallel bus register applications where data is captured at CPU write-cycle rates below 10 MHz.

How does the asynchronous clear function of SN74HC273DWE4 simplify power-on initialization?

The active-low asynchronous clear input resets all 8 flip-flop outputs to logic 0 independently of the clock, allowing the host system to drive all 8 output pins low in a single cycle during power-on reset without waiting for a clock edge.

Can SN74HC273DWE4 interface directly with 3.3 V FPGA I/O banks driving a 5 V peripheral bus?

The HC family input thresholds scale with supply voltage — at 3.3 V the device accepts a logic-high above approximately 2.3 V, while 5 V CMOS outputs swing to 3.3 V, so level compatibility requires a 3.3 V supply on the SN74HC273DWE4 when driven by 3.3 V FPGA outputs.

For a compact I/O expander design, how many SN74HC273DWE4 devices are needed to latch 32 output bits?

Four SN74HC273DWE4 devices, each storing 8 bits, are needed to latch 32 output bits, and with a shared active-low clear line all 32 outputs can be synchronously reset in a single control assertion without additional glue logic.

Related Guides

Why Buy from FindMyChip

Authorized Source
Verified supply chain with full traceability & inspection
Competitive Pricing
Factory-direct from China distributors, low MOQ
Fast Shipping
DHL Express 3–5 days · FedEx/UPS 5–7 days worldwide
Quality Guaranteed
30-day replacement for defective parts, no questions asked

About Texas Instruments

Texas Instruments (TI) is a global semiconductor company headquartered in Dallas, Texas. TI designs and manufactures analog and embedded processing chips used in industrial, automotive, consumer, communications, and enterprise systems.

AvailabilityIn Stock
Reference Price (USD)
Contact for Price
Buy from 1pc · Factory-direct pricing
pcs

In Stock · 24h Response · Worldwide Shipping

Lead Time3-7 business days
MOQFrom 1 piece
ShippingDHL / FedEx / UPS
OriginChina (Authorized)

Response within 24 hours · Worldwide shipping

Their engineering team helped us find a pin-compatible alternative when our original MCU went EOL.

MR
Marco Rossi
CTO, AutoDrive Systems, Italy