Texas Instruments

Power Switch ICs - Power Distribution 0.7A 2.7-5.5V Quad Hi-Side MOSFET

Power Switch ICs - Power Distribution 0.7A 2.7-5.5V Quad Hi-Side MOSFET

Use the download button to access the TLE2024CDWR schematic symbol, PCB footprint, and 3D model.

AND Gate 4-Element 2-IN CMOS 14-Pin SOIC Tube

Octal Edge-Triggered D-Type Flip-Flops With 3-State Outputs

The DRV5013AGEDBZTQ1 is an automotive-grade Hall-effect latch from Texas Instruments supporting 2.7V to 38V supply voltage with AEC-Q100 qualification. It features bipolar latching operation with 12 mT hysteresis, reverse supply protection, and a compact 3-pin SOT-23 package. Available from stock worldwide with fast shipping.

SN74HC112DE4 is a dual negative-edge-triggered JK flip-flop in a 16-pin SOIC package from Texas Instruments HC/UH family, operating up to 20 MHz and sourcing 4 mA output current, suitable for high-speed digital logic sequencing and state machine designs.

The CD74HCT112EE4 is a dual JK-type flip-flop IC with negative-edge triggering, operating at up to 20 MHz from a 5 V supply. It features two independent JK flip-flop elements in a 16-pin PDIP package with 50 pF load capacitance and 4 mA output sink current. RoHS-compliant and available from stock worldwide.

Operational Amplifiers - Op Amps High Speed FET-Input Oper Amplifier

Operational Amplifiers - Op Amps High Speed FET-Input Oper Amplifier

Use the download button to access the CC2420RGZT schematic symbol, PCB footprint, and 3D model.

Flip Flop D-Type Pos-Edge 2-Element 14-Pin PDIP Tube

Texas Instruments TPS2097DG4 is a quad high-side power distribution switch with four independent MOSFET channels each rated at 0.25 A continuous, operating from 2.7 V to 5.5 V supply. Integrated overcurrent, thermal, and undervoltage protection safeguard downstream loads in a 16-pin SOIC package. Available from stock worldwide for USB hub and multi-channel power management designs.

Quad high-side MOSFET power distribution switch with four independent 0.5A continuous channels in a single 16-pin SOIC. Operates from 2.7V to 5.5V with integrated over-current, thermal, and under-voltage protection for USB and portable equipment power management.

Use the download button to access the TLV75518PDBVR schematic symbol, PCB footprint, and 3D model.

TEXAS INSTRUMENTS - DAC0800LCN - Digital to Analogue Converter, 8 bit, CMOS, Parallel, TTL, ± 4.5V to ± 18V, DIP, 16 Pins

NAND Gate 3-Element 3-IN CMOS 14-Pin SOIC T/R

Analog to Digital Converters - ADC 16-Bit 2kSPS 4-Ch Low-Power Delta-Sigma ADC With PGA, Voltage Reference, IDACs, and I2C Interface 16-TSSOP -40 to 125

LDO Regulator Pos 1.5V to 5.5V3.3V 1A 28-Pin HTSSOP EP Tube

SOT-SC70-6

OP Amp Quad GP ±20V/40V 14-Pin CDIP Tube

LDO Regulator Pos 1.5V to 5.5V3.3V 1A 28-Pin HTSSOP EP T/R

TEXAS INSTRUMENTS - TPS65150PWPG4 - IC, LCD BIAS, SMD, TSSOP24

2.25V-5.5V, 300 kHz, Synchronous Buck Controller, Source/ Sink, Prebias Operation

500-mA low-IQ small-size low-dropout (LDO) regulator

DC DC Cntrlr Single-OUT Sync Step Down 2.25V to 5.5V Input 10-Pin HVSSOP EP Tube

500-mA low-IQ small-size low-dropout (LDO) regulator

DC DC Cntrlr Single-OUT Sync Buck 2.25V to 5.5V Input 10-Pin HVSSOP EP T/R

Texas Instruments LM339ANE4 is a quad differential voltage comparator with open-collector outputs and a 0.05 µA typical input bias current. It operates from a single 2V to 36V or dual ±1V to ±18V supply in a 14-pin PDIP package. A widely stocked industry-standard comparator for threshold detection and signal conditioning worldwide.

500-mA low-IQ small-size low-dropout (LDO) regulator

TEXAS INSTRUMENTS - LM2575HVT-5.0 - Buck (Step Down) Switching Regulator, Fixed, 4V-60V In, 5V And 1A Out, TO-220-5

500-mA low-IQ small-size low-dropout (LDO) regulator

OP Amp Quad GP ±20V/40V 14-Pin CDIP Tube

The SN74LS244DWRE4 is an octal buffer and line driver with 3-state outputs in a 20-pin SOIC package. It provides 8 unidirectional non-inverting channels, active-low output-enable control, and a 45 pF load capacitance rating suitable for bus driving. Operating from a 5 V supply, it is designed for data bus buffering, memory interfacing, and address line driving in TTL-compatible digital systems.

'Turbo' CAN Transceiver for CAN FD (Flexible Data Rate)

Buffer/Line Driver 8-CH Non-Inverting 3-ST CMOS 20-Pin TSSOP T/R

Analog Switch ICs 1O SPDT Ana Sw

TEXAS INSTRUMENTS - OPA4336EA - OP AMP, QUAD CMOS S-SUPPLY, 4336

The TS5A3159ADBVTE4 is a single-channel SPDT analog switch IC in a 6-pin SOT-23 package, supporting 100 MHz bandwidth and input voltages up to 5.5 V for signal routing applications. It features normally-closed default position and low on-resistance for precision analog multiplexing. Available in stock worldwide with competitive pricing for consumer, industrial, and automotive designs.

LCD Drivers Compact LCD Bias Supply IC

OP Amp Quad GP ±20V/40V 14-Pin PDIP Tube

Buffers & Line Drivers Quad Bus Buff Gate With 3-State Outputs

Counter ICs 4B SYNC Up Down Binary Counters

Current Mode PWM Controller 5V 1000kHz Automotive 8-Pin TSSOP T/R

CAN Interface IC Industrial CAN Trans

Buffer/Line Driver 8-CH Non-Inverting 3-ST CMOS 20-Pin TSSOP Tube

Operational Amplifiers - Op Amps 0.05uV/C max Single-Supply CMOS

Operational Amplifiers - Op Amps 0.05uV/C max Single-Supply CMOS

TL082CPE4 is a dual general-purpose JFET-input operational amplifier from Texas Instruments with ±18 V supply range and wide bandwidth in an 8-pin PDIP package, offering high-impedance inputs and 70 dB minimum CMRR. Available from stock with worldwide shipping.

Display Interface IC HDMI Hider