Texas Instruments

The TLV314IDBVT is a 3MHz, low-power, low-noise CMOS operational amplifier with rail-to-rail input and output. It offers a maximum input offset voltage of 3mV, 72dB minimum CMRR, and operates from -40°C to 125°C in a 5-pin SOT-23 package. Available in stock from authorized distributors with worldwide shipping.

Automotive 128-Taps Single-Channel Digital Potentiometer With I2C Interface

32-Bit, 38kSPS, 10-Ch Delta-Sigma ADC w/ PGA, Voltage Reference, and Aux ADC for Factory Automation

Use the download button to access the TRF370417IRGET schematic symbol, PCB footprint, and 3D model.

Automotive, Dual 5-A, High-Speed, Low-Side Gate Driver With Negative Input Voltage Capability

16-Bit FET Bus Switch 2.5-V/3.3-V Low-Voltage High-Bandwidth Bus Switch

TSSOP-10

Ultralow-Noise, High PSRR, Fast, RF, 1-A Low-Dropout Linear Regulators

DACxx6x Dual 16-, 14-, 12-Bit, Low-Power, Buffered, Voltage-Output DACs With 2.5-V, 4-PPM/°C Internal Reference

Automotive Qualified SIMPLE SWITCHER® 4V to 36V,3A Synchronous Step-Down Converter

Dual, 2MSPS, 12-Bit, 2+2 or 3+3 Channel, Simultaneous Sampling SAR ADC

TLV3702IP is a dual low-power high-voltage comparator with push-pull output by Texas Instruments. Key specs: two independent comparator channels, 0.1nA input bias current, 5mV max offset voltage, 8-pin DIP package. From $1.20, in stock with worldwide shipping.

Use the download button to access the TL7660IP schematic symbol, PCB footprint, and 3D model.

TLV62568DRLR is a high-efficiency synchronous step-down buck converter accepting 2.5 V to 5.5 V input and delivering up to 1 A output current. It uses voltage-mode PWM control for stable regulation across load conditions. The 6-pin SOT-23 package suits portable, wearable, and IoT devices requiring compact, efficient power conversion.

165-MHz C-Stable Voltage-Feedback Amplifier

Use the download button to access the TPS61031PWPR schematic symbol, PCB footprint, and 3D model.

Quadruple 2-Input Positive-NAND Gate

Use the download button to access the UA7808CKTTR schematic symbol, PCB footprint, and 3D model.

Low-Power Single Bus Buffer Gate with 3-State Output

Octal Buffer/Driver With 3-State Outputs

1.7-W Mono, Fully Differential, Class-AB Audio Amplifier

The SN74LV08ATPWRG4Q1 is an automotive-grade quadruple 2-input positive-AND gate IC from Texas Instruments, operating from 1.65V to 5.5V supply. It features four independent AND gates in a 14-pin TSSOP package with 50pF load capacitance and 12mA output drive capability. Available from stock worldwide with competitive pricing for automotive applications.

Use the download button to access the BQ27621YZFR-G1A schematic symbol, PCB footprint, and 3D model.

14-Bit, 125-MSPS Analog-to-Digital Converter (ADC)

Precision Micropower Shunt Voltage Reference

The CD4078BM is a CMOS 8-Input NOR/OR Gate from Texas Instruments, featuring 8 logic inputs with totem-pole output and 50 pF load capacitance. Available in a 14-pin Small Outline Package with CMOS 4000-series compatibility. From $0.30 in stock with worldwide shipping.

1.2-V Precision Micropower Shunt Voltage Reference, 0.2% accuracy

Use the download button to access the SN74LVC3G34DCTR schematic symbol, PCB footprint, and 3D model.

Texas Instruments, Audio Codec Stereo-channel 16bit- 48ksps USB 28-Pin SSOP

Low Power Battery Backup IC with Integrated Boost Converter

Processor Supervisory Circuit With Power-Fail and Integrated Watchdog Timer

Dual USB Dedicated Charging Port Controllers

Use the download button to access the TPD4E1B06DRLR schematic symbol, PCB footprint, and 3D model.

Closed Loop I2S Input Amplifier with Power Limiter, PVDDmax of 16.5V

Dual-Channel, 12-Bit, 40-MSPS Analog-to-Digital Converter (ADC)

The TLV320AIC1106PW is a single-channel PCM codec with integrated microphone amplifiers and speaker driver, supporting µ-law companding and 13-bit linear coding. It integrates differential analog inputs and on-chip filtering in a 20-pin TSSOP package. Available from stock with worldwide shipping.

Texas Instruments TPS54386TPWPRQ1 is an AEC-Q100 automotive-grade dual 3A synchronous buck converter operating from 4.5V to 28V input with 600 kHz fixed frequency and current-mode PWM control. Supports adjustable output from 0.8V to 25.2V in a 14-pin SOIC package. Available from stock with worldwide shipping.

Automotive Catalog Quad Differential Comparator, Enhanced Voltage

The SN74CBT16292DGGR is a 12-bit 1-of-2 FET multiplexer/demultiplexer with internal pulldown resistors, packaged in a 56-pin TSSOP and rated for 200MHz bandwidth. With 20-ohm on-state resistance and SPDT FET switch topology, it enables high-speed signal routing for display interfaces, memory address multiplexing, and high-bandwidth bus switching in computing and telecommunications applications.

Cap-Free, NMOS, 250mA Low Dropout Regulator with Reverse Current Protection

Automotive Catalog Hex Inverters

Use the download button to access the DAC2932PFBT schematic symbol, PCB footprint, and 3D model.

3.3 V Full-Duplex RS-485, with IEC ESD, 50 Mbps, w/ Enables

Low-Noise, Low-Distortion, G=2000 Instrumentation Amplifier

16 MHz Ultra-Low-Power MCU With 256 KB FRAM, 8 KB SRAM, Low-Energy Vector Math Accelerator

Piccolo™ 32-bit MCU with 60 MHz, 128 KB Flash, CLA, PGAs

Adjustable, 600-mA, 95% Efficient Step-Down Converter, 18uA, MSOP-10

The LM22676QTJE-5.0/NOPB is a high-efficiency synchronous step-down DC-DC switching regulator with a fixed 5 V output. It accepts an input voltage from 4.5 V to 42 V, provides up to 1 A continuous output current, and uses pulse-width modulation with voltage-mode control in a compact 7-pin SOT-223 package.

3-4S Low Power Protector

The TPS63050YFFR is a single-inductor buck-boost converter from Texas Instruments with 1A switches, adjustable output from 2.5V to 5.5V, and current-mode PWM plus PFM control in a 12-ball BGA package. It supports adjustable soft-start for inrush control and maintains high efficiency across a wide input voltage range. Available from stock worldwide with competitive pricing.