Texas Instruments
Texas Instruments (TI) is a global semiconductor company headquartered in Dallas, Texas. TI designs and manufactures analog and embedded processing chips used in industrial, automotive, consumer, communications, and enterprise systems.
35,612
Total Products
99
Categories
All Texas Instruments Components
Showing 16,751–16,800 of 35,612
High Side Smart Power Switch
Quadruple Differential Line Driver
3.3V, Full-Duplex RS-485, 16kV IEC ESD, 20Mbps data rate, w/Enables
Low-quiescent current supervisor with programmable-delay and manual reset
Automotive Half Bridge Gate Driver
Use the download button to access the TL750L05CKTTR schematic symbol, PCB footprint, and 3D model.
36V, High-Side, High-Speed, Current Output Current Sense Amplifier
Use the download button to access the TMS320F28069MPZPQ schematic symbol, PCB footprint, and 3D model.
AUTOMOTIVE LOW-DROPOUT VOLTAGE REGULATORS
Improved Current Mode PWM Controller
Use the download button to access the TCA4311ADR schematic symbol, PCB footprint, and 3D model.
TSSOP-10
Split-Rail Converter, Single-Inductor, Multiple-Output (SIMO) Regulator
Dual Audio Operational Amplifier
Use the download button to access the TCAN337DCNT schematic symbol, PCB footprint, and 3D model.
Single Supply, Auto-Zero Sensor Amplifier w/Programmable Gain & Offset
The TLV70533YFPR is a fixed 3.3-V, 200-mA ultra-low-dropout (LDO) linear regulator from Texas Instruments with a typical dropout voltage of 145 mV and a 2-V to 5.5-V input range. It is optimized for low quiescent current and stable operation with small ceramic capacitors in a 4-ball BGA package. Available from stock with worldwide shipping.
High-voltage High-current Darlington Transistor Array
Use the download button to access the LM2841XQMK/NOPB schematic symbol, PCB footprint, and 3D model.
1080p Dual FPD-Link III Serializer
Enhanced Product Bicmos Advanced Phase Shift Pwm Controller
Dual 1A Current-Limited, Power-Distribution Switches
5V, Low-Power, High-side, Zero-Drift, Voltage Output Current Shunt Monitor in WCSP or QFN Package
Use the download button to access the TLV341IDBVR schematic symbol, PCB footprint, and 3D model.
Complete Low Power Integrated Analog Front End for ECG Applications
5 MHz to 96 MHz 24-bit Color FPD-Link III to OpenLDI Deserializer
Automotive Catalog Triple Buffer/Driver With Open-Drain Output
The TPS2H000AQPWPRQ1 is a dual-channel smart high-side switch from Texas Instruments rated at 40V with 1000mΩ on-resistance, featuring integrated protection against transients, overcurrent, undervoltage, and thermal shutdown in a 16-pin SOIC package. Its automotive-grade design and Schmitt trigger inputs make it ideal for robust load management in vehicle systems. Available in stock worldwide with lead-free RoHS-compliant packaging.
Dual RS-232 Driver/Receiver with IEC61000-4-2 Protection
Low-Power 150-mA Low-Dropout Linear Regulators for Automotive
The LMT86QDCKRQ1 is an AEC-Q100 qualified analog temperature sensor from Texas Instruments in a 5-pin SOT-23 surface-mount package. It delivers ±2.7°C maximum accuracy with ultra-low 8.1µA operating current and a linear analog voltage output proportional to temperature. Designed for automotive thermal management and industrial systems requiring compact, low-power temperature sensing with worldwide availability.
Automotve Catalog Quadruple Bus Buffer Gates With 3-State Outputs
Use the download button to access the ISO7140FCCDBQR schematic symbol, PCB footprint, and 3D model.
3.0V - 20V, 30A, Synchronous Buck Controller with PMBus™, including Telemetry
19-Bit Bus Interface
Ultra-Low Power MSP430 with 128 KB Flash
Low-Power Stereo Voice Band CODEC with 8-ohm Speaker Amplifiers
Automotive Catalog Octal Buffers/Drivers With 3-State Outputs
Dual RS-232 Driver/Receiver With IEC61000-4-2 Protection
Quad-Channel, 12-Bit, 25-MSPS Analog-to-Digital Converter (ADC)
100-mA Fixed Output Linear Regulator
Octal D-type Edge-Triggered Flip-Flops With 3-State Outputs
138mW DirectPath Headphone Amplifier with GPIO control
Use the download button to access the TCA9545APWR schematic symbol, PCB footprint, and 3D model.
3.6V 1.2A 15mΩ 4-Ch I2C Controllable Load Switch with Quick Output Discharge and Prog. Options
MSP430FR6989 16 MHz ULP Microcontroller - 128 KB FRAM, 2KB SRAM, 83 IO, ADC12, LCD, AES, Scan IF
TPS54540BQDDARQ1 is an automotive-grade 5A step-down DC-DC converter from Texas Instruments supporting 4.5V to 42V input voltage. Features current-mode PWM control, Eco-mode for light-load efficiency, adjustable output from 0.8V to 58.8V, and a small outline package. Available from stock worldwide for automotive and industrial power designs.
FlatLink™ Receiver
Automotive Catalog 4.5ns Rail-to-Rail, High Speed Comparator in Microsized Packages
50-mA Micropower Ultra-Low-Dropout LDO in SOT-23 Package
Need Texas Instruments Components?
Get competitive quotes from authorized China distributors
Request a Quote