Texas Instruments

OP Amp Dual GP ±18V 8-Pin SOIC Tube

TEXAS INSTRUMENTS - MSP430FR2633IYQWT - MCU, MSP430, 16BIT, 16MHZ, DSBGA-24

Operational Amplifiers - Op Amps Quad 6.5MHz 585uA R-to-R I/O CMOS

2.7V to 18V, 4A, 34mΩ eFuse with fast overvoltage protection

LDO Regulator Pos 1.25V to 13.7V 0.8A 4-Pin(3+Tab) SOT-223 Tube

MCU 16-bit MSP430 RISC 256KB FRAM 3.3V 100-Pin LQFP T/R

Charge Pump STPUP 1.8V to 3.6V/3.3V 40mA/20mA 10-Pin VSSOP Tube

Latch Addressable 8-CH D-Type 16-Pin SOIC T/R

OP Amp Dual GP ±18V 8-Pin CDIP Tube

Digital Signal Processors & Controllers - DSP, DSC Dig Sig Proc

Digital Signal Processors & Controllers - DSP, DSC Dig Signal Proc

Audio Amp Headphone 2-CH Stereo 0.15W Class-AB 10-Pin HVSSOP EP T/R

Single 2-Input NAND Gate with Open-Drain Output

Buffer/Line Driver 4-CH Non-Inverting 3-ST BiCMOS 14-Pin TSSOP T/R

Monostable Multivibrator Dual -55C 125C 16-Pin SOIC Tube

Inverters Hex Schmitt-Trigger Inverters

Adjustable precision shunt regulator

TEXAS INSTRUMENTS - INA170EA - Current Sense Amplifier, 1 Amplifier, 10 µA, VSSOP, 8 Pins, -40 °C, 85 °C

The CD74HC30MG4 is a single 8-input NAND gate from Texas Instruments in the high-speed CMOS HC logic family, outputting a logic LOW only when all eight inputs are HIGH. It provides 5.2 mA output drive current with a 50 pF load rating in a compact 14-pin SOIC package. RoHS-compliant Green packaging makes it suitable for environmentally regulated applications.

Inverter Schmitt Trigger 6-Element CMOS 14-Pin TSSOP Tube

The CD74HC107MTE4 is a dual JK flip-flop IC from Texas Instruments in a 14-pin SOIC package. It operates in the HC/UH logic family with negative-edge triggering and supports up to 20 MHz clock frequency with 50 pF load capacitance. Available RoHS-compliant with worldwide distribution and in-stock availability.

The CD74HCT21EG4 is a dual 4-input AND gate logic IC from Texas Instruments in the HCT CMOS family, compatible with TTL input levels and operating on a 5 V supply in a 14-pin DIP package. It provides two independent 4-input AND functions for combinational logic design. Available from stock with worldwide shipping.

Quad General Purpose LinCMOS™ Differential Comparator

Operational Amplifiers - Op Amps Lo Vltg Rail to Rail Output CMOS Op Amp

OR Gate 1-Element 2-IN CMOS 5-Pin SC-70 T/R

300mA Low-Dropout (LDO) Regulator

Conv DC-DC 2.3V to 6V Step Down Single-Out 0.6V to 6V 1A 6-Pin WSON EP T/R

Operational Amplifiers - Op Amps Low-Voltage R-To-R Output CMOS

Low Power, Precision, 105 MHz, Voltage Feedback Op Amp

LDO Voltage Regulators Sgl Output LDO 150mA Fixed

The RC4136NE4 is a quad general-purpose voltage-feedback operational amplifier from Texas Instruments, featuring four independent op-amps with 70dB minimum CMRR, 0.5µA typical bias current, and internal frequency compensation in a 14-pin DIP package. Operates across standard bipolar supply ranges making it suitable for analog signal processing. Available with RoHS compliance, competitive pricing, and worldwide in-stock shipping.

Single Wide-Bandwidth High-Output-Drive Op Amp

Automotive 300mA Low-Iq, High PSRR Low-Dropout (LDO) Regulator

Buffer/Driver 1-CH Non-Inverting Open Drain CMOS 5-Pin SC-70 T/R

Inverter 1-Element CMOS 5-Pin SC-70

AFE General Purpose 8 ADC 16bit 1.8V/3V 64-Pin NFBGA T/R

2-Channel, 1MHz, RRIO, 1.8V to 5.5V Operational Amplifier for Cost-Optimized Systems

The LP8556SQ-E09/NOPB is a 6-channel high-efficiency LED backlight driver IC from Texas Instruments, housed in a 24-Pin QFN package. It supports 12 LED segments, serial data input, and delivers high efficacy for LCD backlight applications. Available from stock worldwide with competitive pricing.

LMR23615-Q1 SIMPLE SWITCHER® 36-V, 1.5-A Synchronous Step-Down Converter

The ISO7761FDBQR is a 6-channel reinforced digital isolator from Texas Instruments designed to isolate digital signals across high-voltage barriers with reinforced insulation rating. It operates from 2.25V to 5.5V supply on both sides and supports up to 100 Mbps data rate per channel with a 6/1 bidirectional channel configuration. Packaged in a 16-pin SSOP, it is designed for industrial motor drives, renewable energy inverters, and safety-critical isolated signal interfaces.

SOIC-16

IEEE 802.3bt PoE High-Power PD Interface with Advanced Startup

The Texas Instruments TCAN1051GDRBRQ1 is an automotive-qualified single-channel CAN bus transceiver supporting data rates up to 5Gbps in an 8-pin SON package. It is AEC-Q100 qualified with a 15-year YTEOL and compliant with CAN FD specifications for high-speed automotive networking. Available from stock worldwide with fast delivery.

Use the download button to access the TPS543B20RVFT schematic symbol, PCB footprint, and 3D model.

Dual 5A Compound Gate Driver with Negative Output Voltage Capability

Automotive Low-Quiescent-Current 1% Accurate Supervisor With Programmable Delay

TSSOP-24

3-Channel HDTV Video Amplifier with 5th Order Filters and 6dB Gain

DSBGA-6

Texas Instruments, LM2576HVT-ADJ/NOPB Step-Down Switching Regulator 3A Adjustable, 1.23 → 57 V 5-Pin, TO-220