Texas Instruments

Automotive Reinforced Isolated Modulator With LDO Regulator, ±50mV Input and LVDS Interface

Bus Receivers FLATLINK RECEIVER

Switching Voltage Regulators 3.5V to 36V, 6A Synchronous Step-Down Voltage Converter 30-WQFN -40 to 125

4.5V to 18V INPUT, 2-A SYNCHRONOUS STEP DOWN CONVERTER WITH INTEGRATED FET

SIMPLE SWITCHER® 3.8V to 36V, 3A Synchronous Buck Converter With Ultra-Low EMI

LDO Voltage Regulators Sgl Output LDO 150 mA Fixed(3.0V)

SIMPLE SWITCHER® 3.8V to 36V, 2A Synchronous Buck Converter With Ultra-Low EMI

Use the download button to access the LM78L15ACZ/NOPB schematic symbol, PCB footprint, and 3D model.

Micro-Power (50 µA), Zero-Drift, Rail-to-Rail-Out Instrumentation Amplifier

Use the download button to access the TPS7350QDR schematic symbol, PCB footprint, and 3D model.

Use the download button to access the TCAN1051DRBRQ1 schematic symbol, PCB footprint, and 3D model.

Adaptive Zero Voltage Switching Active-Clamp Flyback Controller

4-Data Lane 2:1 MIPI Switch (10-Channel, 2:1 Analog Switch)

Audio Amplifiers 3W, Ultra Low EMI, Mono Class D Audio Amplifier with Spread Spectrum 24-WQFN -40 to 85

Dual Micro-Power Rail-to-Rail Input CMOS Comparator with Push-Pull Output

Low-power Half-duplex RS-485 Transceiver

Automotive, High/Low Side, Bi-Directional Zerø-Drift Current Sense Amp w/ Enhanced PWM Rejection

Conv DC-DC 1.8V to 6V Step Up Single-Out 1.8V to 27.5V 8-Pin VSON EP T/R

High Speed Operational Amplifiers 3V Single Supply 80MHz High-Speed

The TPSM84824MOLR is a current-mode PWM switching regulator with built-in inductor from Texas Instruments in a QFM-24 package. It accepts 4.5V to 17V input and provides adjustable output from 0.6V to 10V. Available from stock with worldwide shipping.

Use the download button to access the LM5176PWPR schematic symbol, PCB footprint, and 3D model.

MSP430F53xx Mixed Signal Microcontroller

The CD40106BPWRE4 is a 6-element CMOS Schmitt trigger inverter from Texas Instruments in the 4000-series logic family. It features six independent single-input inverters with hysteresis for clean signal switching in a 14-pin TSSOP package. Available from stock worldwide with competitive pricing.

The TPSM846C23MOLR is a 35A PMBus power module from Texas Instruments accepting 4.5V to 15V input and delivering 0.35V to 2.0V adjustable output using voltage-mode PWM control. It integrates controller, power MOSFETs, and magnetics for minimal external BOM in high-density digital power applications. Available from stock worldwide with competitive pricing.

The UCC5310MCD is a single-channel isolated gate driver from Texas Instruments delivering 2A source and 1A sink current with integrated Miller clamp in an 8-SOIC package. It supports differential input and built-in UVLO and transient protection, operating from -40 to 125°C. Available from stock worldwide with competitive pricing.

4.5V to 15V Input, 0.35V to 2.0V Output, 35A Power Module

SOIC-8

IC GATE NAND 1CH 2-INP SOT-23-5

2.4V-5.5V input, tiny 6-pin 3A step-down converter in 1.2-mm x 0.8-mm WCSP

Dual-Channel, Current-Limited, Power-Distribution Switch

LVDS Interface IC 16-Bit Bus LVDS Serializer/Deserializer

High-Voltage, High-Current Darlington Transistor Array

High Performance Dual Core DSP/MCU Audio Processor

TEXAS INSTRUMENTS - INA170EA/250G4 - CURRENT SHUNT MONITOR, VSSOP8, 170

Use the download button to access the ISO7740FDBQR schematic symbol, PCB footprint, and 3D model.

Buffer/Driver 1-CH Inverting Open Drain CMOS 5-Pin SC-70 T/R

TEXAS INSTRUMENTS - INA2181A4IDGST - CURRENT SENSE AMPLIFIER, 350KHZ, VSSOP10

Automotive 4A/6A, 5.7 kVrms Isolated Dual Channel Gate Driver

Conv DC-DC 0.7V to 5.5V Synchronous Step Down Single-Out 1.8V to 5.5V 0.3A 6-Pin DSBGA T/R

0.7Vin Synchronous Boost Converter with 800 nA Ultra-Low Quiescent Current

Buffer/Driver 1-CH Inverting Open Drain CMOS 5-Pin SC-70 T/R

Latches 12B To 24B Multiplex DTyp Latch

16 MHz Ultra-Low-Power Microcontroller With 8 KB FRAM, 2 KB RAM, 10-bit ADC, 15 IO, 2 16-bit Timers

Latches Single D-Type Latch

Single D-Type Latch with 3S Output

Buffer/Driver 1-CH Inverting Open Drain CMOS 5-Pin SC-70 T/R

Single Positive-Edge-Triggered D-Type Flip-Flop with Clear and Preset

LDO Voltage Regulators 10-mA 1.8-V LDO

Texas Instruments DAC8311IDCKTG4 is a 14-bit single-channel voltage output DAC with serial binary input interface and up to 5.5V analog output range. Features 0.0244% maximum linearity error in a miniature 6-pin SC70 package. Available from stock with worldwide shipping.

MCU 16-bit MSP430 RISC 4.5KB Flash 2.5V/3.3V 64-Pin LQFP T/R