Texas Instruments

Dual-Processor Supervisory Circuit with Power-Fail and Watchdog Timer

Low-Power Stereo Voice Band CODEC

High-Output RS-485 Transceiver

Synchronous 8-Bit Up/Down Binary Counters

High Speed CMOS Logic 8-Input Multiplexer/Register with 3-State Outputs

16-Bit Bus Transceivers with 3-State Outputs

2.7V-to-5.5V 16-Bit 1MSPS Serial Analog-to-Digital Converter (ADC)

Single 2-Input Positive-NOR Gate

Low-Power 150-mA Low-Dropout Linear Regulators for Automotive

Texas Instruments POPA2990IPWR is a 1 MHz rail-to-rail input/output op amp with 40 V supply, 115 dB CMRR, 1750 µV max offset voltage, and current-feedback architecture in SO-8. Available from stock with worldwide shipping.

The PADC12DJ5200RFAAV is a 12-bit dual 5.2-GSPS or single 10.4-GSPS RF-sampling ADC from Texas Instruments. It features wide bandwidth and high dynamic range for direct RF digitization. Available in 144-ball BGA package with worldwide shipping.

XOPA462IDDA is a Texas Instruments 180 V high-voltage operational amplifier with 6.5 MHz bandwidth, 25 V/µs slew rate, and 116 dB CMRR in an SOIC-8 package. It uses a current-feedback architecture and operates unity-gain stable. Available from stock with worldwide shipping.

ISO7761QDBQQ1 is a 6-channel digital isolator rated for automotive applications by Texas Instruments. Key specs: 6 isolated channels, 100 Mbps data rate, 2.25 V to 5.5 V supply, SOIC-16 package meeting AEC-Q100 Grade 1. From $2.50, in stock with worldwide shipping.

2048 x 18 Synchronous FIFO Memory

Automotive 60-V, 5-µA IQ, 100-mA low-dropout (LDO) voltage regulator with enable and power good

Voltage output high-side measurement current shunt monitor

Texas Instruments XCC2652RBRGZR is a SimpleLink crystal-less BAW wireless microcontroller supporting multi-standard sub-1 GHz and 2.4 GHz protocols with an 8-bit core, 31 I/O lines, on-chip ADC, DMA, and PWM channels. The crystal-less BAW resonator eliminates external crystal components, reducing BOM cost and PCB area. Packaged in a 48-pin QFN, it targets IoT edge nodes, smart home devices, and industrial wireless sensor networks.

1-MHz, Low-power operational amplifier for cost-sensitive automotive systems

PTMUX1101DCKR is a 5 V, single-pole single-throw (SPST) precision analog switch by Texas Instruments with low leakage current and 300 MHz signal bandwidth. Key specs: 0.4 Ω on-state resistance matching, 40 dB off-state isolation, and 1-channel design in a 5-pin SOT-23 package. Available in tape-and-reel format with worldwide shipping.

Texas Instruments PTPS3840PL25DBVR is a nanopower high-input voltage supervisor with manual reset and programmable-reset time delay, featuring ultra-low quiescent current and 2.5V threshold in a compact SOT-23-5 package. Available from stock with worldwide shipping.

The Texas Instruments PTLV9054IPWR is a high-performance rail-to-rail input/output operational amplifier with 5MHz bandwidth and 15V/µs slew rate. It features a minimum CMRR of 62dB and ultra-low bias current of 5pA at 25°C in a small outline package. Available from stock worldwide with competitive pricing.

MUX36xxx 36-V, Low-Capacitance, Low-Leakage-Current, Precision, Analog Multiplexers

The UC29432D is a precision analog controller IC from Texas Instruments, designed for accurate control in power supply and signal conditioning applications. It provides a single-channel analog control function in a compact 8-pin SOIC package. Available in tape and reel format with worldwide shipping.

The UC2854ADWTR is an enhanced high power factor preregulator IC from Texas Instruments that implements average current-mode PWM control to achieve near-unity power factor correction in AC-DC power supplies, operating from 10-20V bias in a 16-pin SOIC package. It provides integrated boost PFC control with multiplier, error amplifier, and gate drive functions. Available in tape-and-reel from authorized distributors with worldwide shipping.

Current-Mode PWM Controller

Voltage Supervisor with Programmable Time Delay

The CD74AC151E is an 8-bit single-function CMOS multiplexer IC by Texas Instruments in a 16-pin PDIP package. Key specs: AC logic family, 50 pF load capacitance, 24 mA output sink current, RoHS compliant. Available from stock worldwide with competitive pricing.

MSP430G2x33, MSP430G2x03 Mixed Signal Microcontroller

The UC2852N is a high power-factor preregulator IC from Texas Instruments in a DIP-8 package, featuring current-mode control with PWM technique for input voltages from 12.5V to 30V. From $2.50, in stock, worldwide shipping.

Advanced PFC/PWM Combination Controllers

Wide Input Range Synchronous Buck Controller for Sequencing

2.25MHz Step-Down Converter with Dual LDOs & SVS Power Management IC (PMIC)

The UCD7201PWPR is a digital control compatible dual low-side MOSFET driver from Texas Instruments, featuring plus or minus 4A peak output current and single common current sense. Ideal for power conversion designs with 14-pin SOIC package, available from major distributors worldwide with competitive pricing and fast shipping.

Dual-Processor Supervisory Circuit with Power-Fail and Watchdog Timer

Dual-Processor Supervisory Circuit with Power-Fail and Watchdog Timer

Low Iq, 150-mA Low-Dropout Linear Regulator with Power Good Output

The TPA6139A2RGTR is a DirectPath 25mW stereo headphone amplifier IC from Texas Instruments. It features two channels with 0.25 dB gain, eliminating DC-blocking capacitors for reduced BOM cost. Available in a 16-pin QFN package with worldwide shipping.

JFET-input improved offset, low power, wide temperature range, high drive dual operational amplif

Use the download button to access the LM5180QNGUTQ1 schematic symbol, PCB footprint, and 3D model.

High Speed CMOS Logic 7-Stage Binary Ripple Counter

Automotive Catalog Quadruple 2-Input Positive-NOR Gates

Quadruple improved offset and ESD protection operational amplifier

High performance 32-bit ARM® Cortex®-M4F based MCU

Use the download button to access the INA203AIDGST schematic symbol, PCB footprint, and 3D model.

Quadruple 2-Input Exclusive-OR Gates

TLV70029DSET is a 200 mA low-dropout LDO voltage regulator with a fixed 2.9 V output and ultra-low quiescent current of 35 µA. It operates from a 2 V to 5.5 V input supply with a dropout voltage as low as 175 mV, making it ideal for battery-powered designs. Available in a compact 6-pin SOT-23 package with worldwide shipping.

Octal D-type Edge-Triggered Flip-Flops With 3-State Outputs

Automotive capacitor-free 300-mA LDO regulator with foldback current limit for portable devices

4-Channel Digital Audio Delay Processor With I2C Control

Voltage Supervisor with Programmable Time Delay