Texas Instruments

Clock Buffer Clock Buffer w/ Programmable Divider

Serializers & Deserializers - Serdes 1080p Dual FPD- Link III Deserializr

TEXAS INSTRUMENTS - SN74LVC540APWT - Buffer/Line Driver, Inverting, 74LVC540, 74LVC Family, 1.65V to 3.6V Supply, TSSOP-20

Serializers & Deserializers - Serdes 1080p Dual FPD- Link III Deserializr

Use the download button to access the DAC60504BRTET schematic symbol, PCB footprint, and 3D model.

The TL594IPWR is a pulse-width modulation controller IC from Texas Instruments, a widely-used PWM control circuit for switch-mode power supply design. It features two error amplifiers, a precision 5V reference, and adjustable dead-time control with oscillator frequency up to 300kHz in a 16-pin TSSOP package. Available in tape-and-reel format from stock worldwide with competitive pricing.

2.4V-5.5V input, tiny 6-pin 3-A step-down converter in 1.2-mm x 0.8-mm WCSP

16-bit Microcontrollers - MCU Ultra low power Micro Controller

Real Time Clock Timer Control Peripheral

DAC 8-CH Resistor-String 12-bit 20-Pin TSSOP T/R

Buffers & Line Drivers Octal Buffer Driver

2A Dual H-Bridge Motor Driver

Flip-Flops Dual Pos-Edge-Trig D-Type Flip-Flop

Buffers & Line Drivers Octal Buffer/Driver W/3-State Output

Limiting Amplifiers 11.3Gb/s Limit Amp

Processor Supervisor 1.14V 0.85V to 3.3V 5-Pin SOT-23 T/R

Digital to Analog Converters - DAC 10-Bit 12.5 us DAC Serial Input Lo-Pwr

Shift Register Single 8-Bit Serial/Parallel to Serial 16-Pin CDIP Tube

Automotive Catalog High-Speed Differential Line Drivers and Receivers

DC/DC Cntrlr Single-OUT Step Down 1000kHz 28-Pin VQFN EP T/R

General Purpose Amplifiers General Purpose 1 2.1V ~ 5.5V 1MHz 0.5 V/us SOT-23-5 RoHS

Dual 5MHz, 15V/us high slew-rate, RRIO op amp

Buffer/Line Driver 1-CH Non-Inverting 3-ST CMOS 5-Pin SOT-23 T/R

Switching Controllers 4 Ch Multiphase Buck DC/DC Controller

Buffer/Line Driver 1-CH Non-Inverting 3-ST CMOS 5-Pin SC-70 T/R

Buffer/Line Driver 1-CH Non-Inverting 3-ST CMOS 5-Pin SOT-23 T/R

Limiting Amplifiers 11.3Gb/s Limit Amp

Adjustable precision shunt regulator with optimized reference current (pin layout: KRA)

Use the download button to access the ONET1191PRGTR schematic symbol, PCB footprint, and 3D model.

IC BCD-TO-DEC DECODER/DVR 16-DIP

LDO Regulator Pos 1.22V to 5.5V 0.25A/0.125A 20-Pin HTSSOP EP T/R

Digital Bus Switch ICs 24B FET Bus Sw

5-V, 1:1 (SPST), 24-channel FET bus switch with level shifter

16-bit Microcontrollers - MCU Ultra low power Micro Controller

Single Bus Buffer Gate With 3-State Outputs

Digital Bus Switch ICs Octal Edge-Trig D-Type F-F

Supervisory Circuits 220nA w/ 10ms/200ms Select delay time

NanoPower Supervisory Circuits

Texas Instruments TPS3836H30DBVRG4 is a single-channel voltage supervisor and reset IC with a fixed 3.0V threshold, designed to monitor supply rails and assert a reset signal during undervoltage conditions. Offered in a compact SOT-23-5 package and available from stock with worldwide shipping.

Texas Instruments SN74HC688DWE4 is an 8-bit identity comparator in the HC logic family housed in a 20-pin SOIC package. Provides cascadable magnitude comparison with inverted output for address decoding and data matching. Available from authorized distributors with worldwide shipping.

Texas Instruments TL064BCNG4 is a quad JFET-input operational amplifier featuring four independent op-amp circuits with low bias current and low power consumption. It operates on dual supply voltages and is housed in a 14-Pin DIP package for through-hole assembly. Available from stock worldwide with fast shipping.

Use the download button to access the DAC53608RTET schematic symbol, PCB footprint, and 3D model.

High Speed Operational Amplifiers Dual WB Hi Out Crnt Op Amp

16-Bit, Dual, Low Power, Ultra-low Glitch, Buffered Voltage Output DAC with 2.5V, 4ppm/°C Reference

Adjustable precision shunt regulator with optimized reference current

TLV5624CDGKG4 is a single-channel 8-bit resistor-string digital-to-analog converter from Texas Instruments with serial SPI input interface and up to 2.9V analog output voltage in an 8-pin VSSOP package. It features binary-coded input format with a maximum linearity error of 0.1953% for cost-effective voltage generation. Available in stock worldwide for portable instruments, calibration references, and embedded analog output applications.

Texas Instruments TLV5624IDRG4 is a single-channel 8-bit resistor-string digital-to-analog converter with serial SPI-compatible interface and up to 2.9V analog output voltage. It offers 0.195% maximum linearity error for accurate voltage generation in embedded systems. Available in an 8-pin SOIC package with worldwide shipping.

Digital to Analog Converters - DAC 8-Bit 1.0-3.5us DAC Serial Out

Voltage References 8.192-V Prec M-P Shunt 1% accuracy

Digital to Analog Converters - DAC 8-Bit 1.0-3.5us DAC Serial Out