Texas Instruments

Use the download button to access the DAC11001BPFBT schematic symbol, PCB footprint, and 3D model.

RS-232 Interface IC Multichannel RS-232 compatible line driver/receiver (3T/5R) with 15-kV IEC ESD protection 28-TSSOP -40 to 85

The LM383AT is a monolithic 11 W single-channel audio power amplifier from Texas Instruments with 0.2% harmonic distortion and 30 kHz bandwidth. It comes in a 5-pin TO-220 ZIP package ideal for heat-sink mounting in compact audio designs. Available in stock worldwide with competitive pricing and fast shipping.

Use the download button to access the TPSI3050QDWZRQ1 schematic symbol, PCB footprint, and 3D model.

Use the download button to access the TPS62933PDRLR schematic symbol, PCB footprint, and 3D model.

Analog Switch ICs 44-V, latch-up immune, 2:1 (SPDT) precision switch with 1.8-V logic

Battery Management Multi-chemistry Impedance Track stand-alone fuel gauge

Multiplexer Switch ICs 100-V, flat RON, single 8:1 multiplexers with latch-up immunity and 1.8-V logic 16-TSSOP -40 to 125

Use the download button to access the TPSM63610RDFR schematic symbol, PCB footprint, and 3D model.

Power Management Specialized - PMIC 2.7-V to 40-V, 152-mohm, 1.8-A eFuse with output power limiting 10-VSON -40 to 125

Use the download button to access the ADC09QJ1300AAV schematic symbol, PCB footprint, and 3D model.

RS-485 Interface IC RS-485 transceiver with slew-rate control, integrated switchable termination and duplex switching 16-VQFN -40 to 125

Analog to Digital Converters - ADC Automotive, four-channel, 24-bit, 64-kSPS, simultaneous-sampling, delta-sigma ADC

Board Mount Current Sensors Integrated Fluxgate Magnetic Sensor IC for Closed-Loop Applications 20-QFN -40 to 125

Analog to Digital Converters - ADC Single-channel, 14-bit, 65-MSPS, low-noise, ultra-low-power and low-latency ADC

The TPS37043A8OFDDFRQ1 is an AEC-Q100-qualified automotive 3-channel window voltage supervisor IC from Texas Instruments with adjustable thresholds and very-high accuracy in a compact 8-pin SOT23 package. It monitors multiple supply rails simultaneously, asserting a fault output when any rail drifts outside its programmed window. Available from authorized distributors globally with worldwide shipping.

SNx4LV123A Dual Retriggerable Monostable Multivibrators With Schmitt-Trigger Inputs

Multiplexer Switch ICs USB 2.0 480-Mbps 2:1 multiplexer and 1:2 demultiplexer

Board Mount Hall Effect/Magnetic Sensors High-speed Hall-effect latch with low jitter (fast response) 3-SOT-23 -40 to 125

Switching Voltage Regulators 3-V to 17-V, 0.6-A, low-IQ, synchronous buck converter in SOT-583 package 8-SOT-5X3 -40 to 150

Use the download button to access the CSD13306W schematic symbol, PCB footprint, and 3D model.

Battery Management 800-mA Li-ion and LiFePO4 IC programmable linear charger with regulated power path in WCSP package

Switching Voltage Regulators 36-V, 5-A synchronous buck converter

Use the download button to access the DAC11001BPFBR schematic symbol, PCB footprint, and 3D model.

Current Monitor Regulator High/Low-Side TSOT-23-8

Interface - I/O Expanders 16-bit translating IC-bus/SMBus I/O expander with interrupt, reset, and agile I/O configuration

Switching Voltage Regulators 2.5-V to 5.5-V input, 4-A step-down converter with 1% accuracy in 1.5-mm x 1.5-mm QFN 6-VSON-HR -40 to 125

Use the download button to access the AM6442BSEFHAALV schematic symbol, PCB footprint, and 3D model.

Precision Amplifiers Dual, automotive qualified, wide-bandwidth, zero-drift, zero-crossover, precision amplifier 8-VSSOP -40 to 125

Board Mount Current Sensors AEC-Q100 +/-420-V i solated Hall-effect

Non-Isolated DC/DC Converters 6A 5V-In Wide Adj Module w/Auto-Trk

Battery Management Voltage and temperature protection for 3-s to 16-s cell Li-ion batteries with internal delay timer

Board Mount Current Sensors AEC-Q100, +/-420-V isolated Hall-effect current sensor with internal reference 8-SOIC -40 to 125

LDO Voltage Regulators 50-mA 24-V ultra-low-IQ low-dropout (LDO) voltage regulator

The OPA4379AIPWRG4 is a quad rail-to-rail input/output operational amplifier operating from a 1.8 V supply with only 2.9 µA quiescent current per channel and a 90 kHz gain-bandwidth product in a 14-pin SOIC package. It delivers 100 dB typical common-mode rejection ratio and 2000 µV maximum input offset for precise low-power signal conditioning. Available from Texas Instruments with worldwide stock.

Motor / Motion / Ignition Controllers & Drivers Automotive 40-V, 32-A H-Bridge driver with integrated current sensing and feedback

Logic Gates CMOS Quad 2-In, NOR Gate IC 4 Channel 14-SO

Quad Local Interconnect Network (LIN) Transceiver with Dominant State Timeout

Switching Voltage Regulators Automotive, 2.75-V to 6-V, dual 1-A output, step-down converter with adjustable frequency

Translation - Voltage Levels Automotive two-channel fixed-direction level shifter with channels in same direction

Motor / Motion / Ignition Controllers & Drivers 100V H-bridge gate driver 24-VQFN -40 to 125

Analog to Digital Converters - ADC Automotive 16-bit, 32-kSPS, two-channel, simultaneous-sampling, delta-sigma ADC

Voltage References 650-nA quiescent current, 12-ppm/C drift, ultra-low-power precision voltage reference

USB Interface IC USB Type-C + Type-A dual charging ports controller with programmable current limit & load shedding

Translation - Voltage Levels Automotive single-channel fixed direction inverting 1.1-V to 5.5-V voltage level translator

Texas Instruments CC2400 is a single-chip low-cost, low-power 2.4GHz ISM-band RF transceiver with extensive hardware features for wireless connectivity. Key specs: CMOS technology, 48-pin LCC package, industrial temperature grade. Available from stock worldwide with fast shipping.

Use the download button to access the TPSM82901SISR schematic symbol, PCB footprint, and 3D model.

Switching Voltage Regulators Automotive, 3-V to 10-V, 2-A low-IQ synchronous buck converter with 165C junction temperature</p 9-VQFN-HR -40 to 165

Analog Comparators 225-ps high-speed comparator with low-voltage differential signal (LVDS) outputs

TPS6282x 2.4-V to 5.5-V Input, 1-, 2-, 3-, 4-A Step-down Converter with 1% Output Accuracy