Texas Instruments

3.3-V to 5-V RS-485 transceiver with ±18-kV IEC ESD protection

1.2-V Output, 400-mA, 95% Efficient Step-Down Converter, 15uA, ThinSOT-23

Low-Power Current-Mode Push-Pull PWM

The TPS7433DR is a fixed-output low-dropout (LDO) linear voltage regulator with an input voltage range of 3.714V to 7V and a typical dropout voltage of only 180 mV. It is housed in a compact 8-pin SOIC package for space-efficient power management. Available from stock with worldwide shipping.

60V, 6A Power Limiting eFuse

2.25V-5.5V, 600 kHz, Synchronous Buck Controller, Source/ Sink, Prebias Operation

Dual Synchronous, Step-Down Controller with 5-V and 3.3-V LDOs

Quad Precision Single Supply uPower Operational Amplifier

The TLV431BCDCKT is a 0.5% accuracy low-voltage adjustable precision shunt regulator from Texas Instruments. It features an adjustable output voltage range from 1.24V to 6V with tight tolerance. Available in compact SOT-23 6-pin package, from $0.20 in stock with worldwide shipping.

Use the download button to access the TL441CN schematic symbol, PCB footprint, and 3D model.

10-Bit, 40 MSPS 1-Channel AFE for CCD Sensors

14-bit, 5V, 200KSPS, 8-Channel Unipolar ADC

Adjustable precision shunt regulator

Hex Inverters With Open-Drain Outputs

JFET-Input High-Output-Drive uPower Operational Amplifier

Octal Buffers/Drivers With 3-State Outputs

Quadruple D-Type Flip-Flops With Clear

180-MHz High Output Drive Voltage-Feedback Amplifier

Embedded Test-Bus Controllers IEEE STD 1149.1 (JTAG) TAP Masters W/ 8-Bit Generic Host Interfaces

12-Bit Asynchronous Binary Counter

Hex D-Type Flip-Flops With Clear

Dual FET Bus Switch

Octal Buffers/Drivers With 3-State Outputs

Octal Buffers/Drivers With 3-State Outputs

315W-stereo / 600W-mono ultra-HD analog-input automotive class-D amplifier

Remote 8-Bit I2C and Low-Power I/O Expander With Interrupt Output and Configuration Registers

Adjustable precision micropower shunt voltage reference with 0.2% accuracy

Use the download button to access the LT1030CD schematic symbol, PCB footprint, and 3D model.

MSP430G2x33, MSP430G2x03 Mixed Signal Microcontroller

Quad Differential Comparator, Enhanced Voltage

Micropower Integrated Precision Voltage Reference

16-Bit Buffers/Drivers with 3-State Outputs

Octal Buffers and Line Drivers with 3-State Outputs

Low-Voltage High-Speed Quadruple Differential Line Receiver

Octal Line Driver/MOS Driver with 3-State Outputs

The CD4502BM96 is a CMOS strobed hex inverter and buffer with three-state outputs from Texas Instruments in the 4000-series logic family. It features active-low enable control, common inhibit for all 6 channels, and 50 pF load capacitance in a 16-pin SOIC package. Available with worldwide shipping.

Voltage output high-side measurement current shunt monitor

Radiation hardened supply-voltage supervisor in Space Enhanced Plastic

40V,low-/high-side, zero-drift, voltage output CSA w/low bias current & enable in WCSP package

40V, bi-directional, low-/high-side, zero-drift, voltage output CSA w/low bias current and enable

45-W, 2.1-MHz Digital input 4-channel automotive class-D audio amplifier

Four-port USB 3.2 x1 Gen1 hub with USB billboard

Automotive 60-V, 5-µA IQ, 100-mA low-dropout (LDO) voltage regulator with enable and power good

32-Bit Digital Signal Controller with Flash

Single Supply-Voltage Supervisor

1.5-A Low-Noise Fast-Transient-Response Low-Dropout Regulator

10-Bit, 28 MSPS 1-Channel AFE for CCD Sensors

Advanced LinCMOS™ Rail-To-Rail Quad Operational Amplifier

Use the download button to access the TLC27L1AID schematic symbol, PCB footprint, and 3D model.

SOP-14