Texas Instruments

Use the download button to access the MC3403D schematic symbol, PCB footprint, and 3D model.

Buffers & Line Drivers 20-Bit Buffer/Driver With 3-State Outputs

UART 4-CH 65Byte FIFO 1.8V/2.5V/3.3V/5V 64-Pin LQFP Tray

4-bit dual-supply bus transceiver with 3-state outputs and independent direction control inputs

LDO Regulator Pos 5V 0.15A 5-Pin SOT-23 T/R

12-Channel I2C constant-current RGB LED driver

IC RS485 TXRX 1MBPS 8-SOIC

LDO Regulator Pos 3V 0.15A 5-Pin SOT-23 T/R

Use the download button to access the DRV8874QPWPRQ1 schematic symbol, PCB footprint, and 3D model.

Digital Isolator CMOS 6-CH 100Mbps Automotive 16-Pin SSOP T/R

Digital Isolator CMOS 6-CH 100Mbps Automotive 16-Pin SSOP T/R

Voltage References Micropower Voltage Reference

RS-485 Interface IC +/-70-V fault-protected 3.3-V to 5-V RS-485 transceiver with IEC ESD 8-VSSOP -40 to 125

RS-485 Interface IC

IC OCT TRANSP LATCH HS 3ST 20DIP

The SN74LVC10APWRE4 is a triple 3-input NAND gate IC from Texas Instruments, belonging to the LVC (Low-Voltage CMOS) logic family with 24mA output drive capability and 1.65V to 3.6V operating voltage range in a 14-pin TSSOP package. It provides three independent NAND logic functions with 5V-tolerant inputs for mixed-voltage interfacing. RoHS compliant with worldwide distribution.

Operational Amplifiers - Op Amps Advanced LinCMOS Rail-To-Rail Dual

Use the download button to access the TPS54373PWPR schematic symbol, PCB footprint, and 3D model.

Digital Bus Switch ICs DUAL INVERTER

Use the download button to access the ISO7721BDWR schematic symbol, PCB footprint, and 3D model.

Operational Amplifiers - Op Amps 180-V, wide bandwidth (6.5 MHz), high-slew rate (25 V/ s) unity-gain stable op amp 8-SO PowerPAD -40 to 85

High-Voltage, High-Current (30-mA) Operational Amplifier

LVDS Interface IC Single Full-Duplex LVDS Transceiver

Counter ICs Dual 4B Binary Counter

LVDS Interface IC Single Full-Duplex LVDS Transceiver

Use the download button to access the TPS2066ADRBT schematic symbol, PCB footprint, and 3D model.

Analog to Digital Converters - ADC 12-Bit 200 KSPS 11 Ch Lo-Pwr

The CD74HCT132MTE4 is a quad 2-input Schmitt-trigger NAND gate IC from the HCT high-speed CMOS logic family, packaged in a 14-pin SOIC. It operates at 5V with TTL-compatible input thresholds, 50pF load capacitance, and four independent NAND gates featuring hysteresis inputs that reject noise in slow or noisy signal environments typical in industrial control systems.

IC, Logic, 7400, Counter, SN74161N

Current & Power Monitors & Regulators AEC-Q100, 36V, 550kHz, 4V/ us, high-precision current sense amplifier w/ comparator 8-VSSOP -40 to 125

RF System on a Chip - SoC Single-chip 76-GHz to 81-GHz automotive radar sensor integrating DSP, MCU and radar accelerator 161-FC/CSP -40 to 125

The AWR1843ABSABLRQ1 is a single-chip 76 GHz to 81 GHz automotive mmWave radar sensor from Texas Instruments, integrating a DSP, ARM Cortex-R4F MCU, radar accelerator, and analog front-end in a 161-pin FC/CSP package rated -40°C to 125°C. It enables high-resolution 3D point-cloud sensing for ADAS and autonomous driving applications. AEC-Q100 qualified for automotive grade reliability.

1.5-V to 3.3-V, 1-to-4 high-performance LVCMOS fan-out buffer and level translator

Logic Gates Quadruple 2-Input Positive-OR Gates

Buffers & Line Drivers Octal Line/MOS Drv w/3-State Output

Switching Voltage Regulators 300mA Hi-Eff Step-Down Converter

MSOP-10

Operational Amplifiers - Op Amps Quad Low-Voltage Rail-to-Rail

Buffers & Line Drivers Octal Bfr & Line/MOS Drvr W/3-St Otpt

The DRV5013BCELPE is a bipolar latched Hall-effect magnetic sensor IC from Texas Instruments, featuring reverse polarity and short circuit protection for robust industrial use. It operates in bipolar latching mode with 24 mT hysteresis and is housed in a 4mm x 1.52mm body package. Designed for current measurement and position sensing, this lead-free device was introduced in 2019 for modern magnetic sensing applications.

Switching Voltage Regulators Adjustable Inverting DC-DC Converter

The PTPS2HB35CQPWPRQ1 is a 40V dual-channel smart high-side switch from Texas Instruments, designed for automotive load switching with integrated protection features. It provides 35 mΩ on-resistance per channel, 14 A peak output current, and built-in transient, overcurrent, thermal, and undervoltage protection. Available in a 16-pin SOIC package, this AEC-Q100 qualified device is ideal for automotive body control and power distribution systems.

Buffers & Line Drivers Octal Buffers And Line/MOS Drs

Buffers & Line Drivers Octal Line/MOS Drv w/3-State Output

IC OPAMP GP 2 CIRCUIT 8DIP

The DRV5057A2QDBZT is a ratiometric linear Hall-effect magnetic sensor IC from Texas Instruments, housed in a compact SOT-23 3-pin package. It operates from a 4.5V to 5.5V supply, providing an analog output voltage proportional to magnetic field strength with a ±42 mT range and 42 mT hysteresis. Ideal for automotive and industrial applications requiring contactless position sensing and current measurement.

USB Interface IC Dual Channel USB3.0 Redriver/Equalizer

Battery Management Low IQ highly integrated battery charge management solution for wearables and IoT

The ADS1203IRGTTG4 is a single-channel 16-bit delta-sigma analog-to-digital converter from Texas Instruments with 40 ksps output data rate and an ultra-low linearity error of 0.00018%, housed in a 16-pin VQFN package. It accepts analog inputs from 4.5V to 5.5V and provides serial output for high-precision measurements in industrial and process control systems. Available in stock worldwide for precision data acquisition and sensor measurement applications.

Dual nanopower, small size comparator with push-pull output