Texas Instruments

Basic Isolation Hall-Effect Current Sensor

The LM4872ITP/NOPB is a 1-watt audio power amplifier IC in an 8-ball micro SMD BGA package, designed for portable and space-constrained audio applications. It delivers high-quality audio output in a compact 3x3 mm fine-pitch grid array. Available in stock with worldwide shipping.

Switching Voltage Regulators 3.8-V to 36-V, 3-A, ultra-small synchronous step-down converter

TEXAS INSTRUMENTS - SN74LV541APW - Buffer / Line Driver, 74LV541, 2 V to 5.5 V, TSSOP-20

Monostable Multi-vibrator High Speec CMOS Logic Dual Monostable Multi-vibrator with Reset 16-CDIP -55 to 125

Interface - Signal Buffers, Repeaters 2-bit bidirectional 2.3- to 5.5-V hot swappable 400-kHz I2C/SMBus buffer with Stuck Bus Recovery 8-VSSOP -40 to 125

Counter Shift Registers 8-bit serial-in/parallel-out shift register 14-TSSOP -40 to 125

Digital Signal Processors & Controllers - DSP, DSC C2000 32-bit MCU with 150 MHz, 256 KB Flash, EMIF

Supervisory Circuits 3P Vltg Supervisor

Audio Amp Speaker 1-CH Mono 0.7W Class-AB 8-Pin SOIC T/R

Hot Swap Voltage Controllers -9-V to -80-V hot swap controller with power limiting 14-SOIC -40 to 125

Digital Isolators Automotive high-speed, reinforced four-channel digital isolator in extra-wide package 16-SOIC -40 to 125

The Texas Instruments SN65HVD61DR is a ControlNet line transceiver with differential Schmitt trigger input in a 14-pin SOIC package. It features a single-function differential interface designed for robust industrial network communication. Available from stock worldwide with fast shipping.

Instrumentation Amplifiers Low power (350-uA), precision instrumentation amp with +/-60-V overvoltage protection (gain pins 2, 3)

Use the download button to access the INA848IDR schematic symbol, PCB footprint, and 3D model.

Board Mount Hall Effect / Magnetic Sensors 2.5 to 38 V 3-TO-92 -40 to 125

Voltage References Micropower Voltage Reference Diode 3-TO-92 -40 to 85

Use the download button to access the TPS562202DRLR schematic symbol, PCB footprint, and 3D model.

CAN Interface IC Automotive High Speed Dual CAN Transceiver 14-VSON -40 to 125

16-bit Microcontrollers - MCU Ultra low power MCU

3-S TO 16-S HIGH ACCURACY BATTERY BQ76952 3-Series to 16-Series High Accuracy Battery Monitor and Protector for LiIon, Li Polymer, and LiFePO4 Battery Packs

Analog to Digital Converters - ADC 8-Bit, 42-MSPS Analog-to-Digital Converter (ADC) 20-TSSOP -40 to 85

Logic Gates Automotive dual 4-input NAND gates with Schmitt-trigger inputs 14-SOIC -40 to 125

Use the download button to access the TLV5617ACDG4 schematic symbol, PCB footprint, and 3D model.

The TPS2210APWPG4 is a quad-channel intelligent power switch and voltage supervisor IC from Texas Instruments, delivering up to 2.492W across 3 channels in a 24-pin HTSSOP package. It requires dual supply rails of 3–5.5V and 7–13.5V for operation, enabling robust power management and sequencing. Available in RoHS-compliant lead-free packaging, in stock worldwide with fast global shipping.

TSSOP, TSSOP5/6,.08

Use the download button to access the ISOW7841FAQDWEQ1 schematic symbol, PCB footprint, and 3D model.

Digital Isolators Automotive, high-efficiency, quad-channel, 3/1, reinforced digital isolator with integrated power 16-SOIC -40 to 125

Motor/Motion/Ignition Controllers & Drivers 48-V, 1.5-A bipolar stepper motor driver with integrated current sensing & 1/256 microstepping 24-VQFN -40 to 125

Digital to Analog Converters - DAC Quad Ser In 12-Bit Voltage Output

Precision Amplifiers Low noise (0.2- uVPP, 9-nV/ Hz), heavy capacitive drive (25-nF), super beta, precision op amp, dual 8-VSSOP -40 to 120

Board Mount Current Sensors Precision isolated current sensor with external reference 8-SOIC -40 to 125

Use the download button to access the TLV9151SIDBVR schematic symbol, PCB footprint, and 3D model.

Motor/Motion/Ignition Controllers & Drivers 48-V, 1.5-A bipolar stepper or dual brushed motor driver with integrated current sensing 24-VQFN -40 to 125

Switching Voltage Regulators Automotive qualified SIMPLE SWITCHER 4-V to 36-V, 1-A synchronous step-down converter 6-SOT-23 -40 to 150

Switching Voltage Regulators

Motor/Motion/Ignition Controllers & Drivers 48-V, 1.5-A bipolar stepper or dual brushed motor driver with integrated current sensing 24-VQFN -40 to 125

The TC211 is a full-frame charge-coupled device (CCD) image sensor designed specifically for industrial applications requiring ruggedness and small size. The image-sensing area is configured into 165 horizontal lines each containing 192 pixels. Twelve additional pixels are provided at the end of each line to establish a dark reference and line clamp. The antiblooming feature is activated by supplying clock pulses to the antiblooming gate, an integral part of each image-sensing element. The charge is con

Logic Comparators 4-bit binary or BCD Magnitude Comparator

Board Mount Current Sensors Precision isolated current sensor with external reference 8-SOIC -40 to 125

Board Mount Current Sensors Precision isolated current sensor with external reference 8-SOIC -40 to 125

Current Sense Amplifiers -4-V to 110-V, 1.3-MHz, high-precision current sense amplifier 5-SOT-23 -40 to 125

Use the download button to access the HDC2021DEBT schematic symbol, PCB footprint, and 3D model.

Use the download button to access the HDC2021DEBR schematic symbol, PCB footprint, and 3D model.

Current Sense Amplifiers -4 to 100-V, 1-MHz current sense amplifier

Current Sense Amplifiers -4 to 100-V, 1-MHz current sense amplifier

Current Sense Amplifiers -4 to 100-V, 1-MHz current sense amplifier

Current Sense Amplifiers -4-V to 110-V, 1.3-MHz, high-precision current sense amplifier 5-SOT-23 -40 to 125

Current Sense Amplifiers -4-V to 110-V, 1.3-MHz, high-precision current sense amplifier 5-SOT-23 -40 to 125

300-mA, Ultra-Low-Noise, Low-IQ, High PSRR LDO