Texas Instruments

The ADS7229IPWG4 is a 12-bit successive approximation ADC with a single analog input channel, 0.0122% maximum linearity error, and 0.782 µs conversion time in a 16-pin TSSOP package. It accepts inputs up to 2.525 V and delivers precision data acquisition performance. Available from stock with worldwide shipping.

Texas Instruments ADC12DS080CISQ/NOPB, 12-bit Serial ADC Dual Differential Input, 60-Pin LLP

8bit A-Dconverter,ADC0844CCN DIL20 25kHz

Texas Instruments ADC12048CIVF/NOPB, 12-bit Parallel ADC Differential, Pseudo Differential, Single Ended Input, 44-Pin

LLP-6

The 74LVCHR16245AGRG4 is a 16-bit non-inverting dual-supply bus transceiver from Texas Instruments with LVC-family LVTTL logic levels, supporting bidirectional data transfer in 48-pin TSSOP package. It features common direction and output-enable controls and 12mA output current drive. Suitable for 3.3V to 5V level translation and high-speed bus buffering.

The 74LVCR162245DLG4 is a 16-bit non-inverting dual bus transceiver from the LVC logic family, housed in a 48-pin SSOP package and operating from 2.7V to 3.6V supply. With bidirectional common control and 50pF load capacitance, it enables efficient data transfer between two buses in microprocessor memory interfaces, FPGA I/O expansion, and high-speed communication backplanes.

ADC121S051CISD, 12-Bit Analogue to Digital Converter, Differential, SPI, 6-Pin LLP EP

QCCJ, LDCC28,.5SQ

74LVCHR16245ALRG4, Dual Bus Transceiver LVC, 16-Bit Non-Inverting 1.65 to 3.6V 48-Pin SSOP

The 74FCT16841ATPVCG4 is a 20-bit D-type transparent latch with 3-state outputs in a 56-pin SSOP package, operating at 5V supply. It provides high-speed FCT logic performance with active-low enable control, 50pF load capacitance, and 64mA sink current, making it ideal for data bus buffering, address latching, and storage in high-density bus interface designs.

Texas Instruments ADC0844CCN/NOPB, 8-bit Parallel ADC Differential, Pseudo Differential, Single Ended Input, 20-Pin MDIP

The 74LVC16245ADGVRG4 is a 16-bit bidirectional non-inverting bus transceiver from Texas Instruments in the LVC logic family with LVTTL compatibility. It provides dual-port data transfer at 3.3 V in a 48-pin TVSOP package. From $0.85, in stock, worldwide shipping.

The 74LVC161284DGGR is a 19-bit bus transceiver from Texas Instruments supporting IEEE 1284 interface standard with 3.3V LVC logic levels, 48-pin TSSOP package, and bidirectional data transfer capability. It provides TTL-compatible outputs and is suitable for high-speed data communication applications. Available in volume quantities with worldwide distribution and fast shipping.

Texas Instruments 74LVC1G139DCTRG4 is a 1-of-4 inverting 2-line to 4-line decoder and demultiplexer operating from 1.65V to 5.5V supply in an 8-pin SSOP package. Features active-low outputs for direct enable and chip-select applications. Available from stock worldwide with fast shipping.

The 74FCT16823CTPVCG4 is a 9-bit D-type flip-flop register with tri-state outputs from Texas Instruments in the FCT logic family, delivering 64 mA sink current and 50 pF load capacitance in a 56-pin SSOP package for high-drive bus interface applications. It provides edge-triggered data latching with active-low output enable for bus-width data registers in high-speed CMOS and TTL-compatible systems. Available in stock globally for data bus registers and memory interface latch applications.

The 74FCT16373ATPVCG4 is a 16-bit transparent D-type latch with 3-state outputs from Texas Instruments, designed for high-speed bus interfacing applications. It features FCT logic family performance with 64mA output drive capability and operates in a 48-pin SSOP package. Ideal for data buffering, bus multiplexing, and address latching in embedded and computing systems.

The SN74AUP1G02DRLRG4 is a single 2-input NOR gate from Texas Instruments in the ultra-low-power AUP/ULP logic family. Operating from 0.8 V to 3.6 V, it achieves sub-microwatt quiescent power making it ideal for IoT and wearable designs. Packaged in a 6-pin SOT-563 very thin small outline, it suits ultra-compact PCB layouts.

Texas Instruments 74FCT16240ATPVCG4 16-Channel Buffer & Line Driver, 3-State, Inverting, 48-Pin SSOP

Current Sense Amplifiers 2.7 to 110V, 800kHz, ultra-precise current sense amplifier in small (sc-70) package

The THS4011MJG is a high-speed, single-channel voltage-feedback operational amplifier from Texas Instruments, operating on ±16.5V or 33V single supply. It features a minimum CMRR of 75dB, 6µA typical bias current, and frequency compensation, housed in an 8-pin CDIP package for signal amplification in precision analog and high-frequency applications.

The 74FCT162244TPVCG4 is a 16-channel 3-state non-inverting buffer and line driver from Texas Instruments in a 48-pin SSOP package. It provides four independent 4-bit sections with active-low output enables and 24 mA sink current, delivering high-drive bus buffering for 5 V digital systems. RoHS compliant in tape and reel format.

74CBT16233DGGRG4, Multiplexer/Demultiplexer Octal 2:1, 56-Pin, TSSOP, 16

The SN74AVC126PWR is a quad 1-bit bus buffer from Texas Instruments in the AVC logic family, featuring individual 3-state output enable (active-high) per channel and unidirectional signal flow. It operates from 1.65 V to 3.6 V, drives 12 mA per output, and comes in a 14-pin TSSOP package for mixed-voltage bus isolation.

Texas Instruments 74CBTD1G125DCKRG4, Bus Switch, 1 x 1:1, 5-Pin SC-70

The 74CBT16245DGGRG4 is a 16-bit CBT bus switch from Texas Instruments featuring eight 1:1 unidirectional channels with TTL-compatible control logic operating at 5V supply. It supports high-speed bus switching with a 50pF load capacitance and common control inputs in a 48-pin TSSOP package. Available from stock with worldwide shipping.

2-Channel Dual ADC Pipelined 105Msps 14-bit Parallel/Serial/LVDS 64-Pin VQFN EP T/R

Texas Instruments 74CBTLV3125DBQRG4, Bus Switch, 1 x 1:1, 16-Pin SSOP

Supervisory Circuits Low-power 3-pin voltage supervisor (reset IC) with active-low open-drain reset 3-SOT-23 -40 to 125

The CD74HC161MG4 is a high-speed CMOS 4-bit synchronous binary up-counter from Texas Instruments with synchronous clear, load, and terminal count output (TCO), operating at up to 20 MHz in a 16-pin small outline package. It features active-high preset and parallel load capability for flexible counter programming in digital timing and frequency division circuits. Available in stock globally with competitive pricing.

Use the download button to access the SN55453BJG schematic symbol, PCB footprint, and 3D model.

The 74CBT1G125DBVRG4 is a single-bit bus switch from Texas Instruments with active-low output enable, packaged in a compact 5-pin SOT-23 form factor for space-constrained PCB designs. It provides transparent, near-zero propagation delay signal switching between A and B ports for 3.3V and 5V bus interface applications. Available in stock with worldwide shipping for high-volume consumer and industrial designs.

The 74FCT162245TPVCTG4 is a 16-bit non-inverting bidirectional bus transceiver from Texas Instruments' FCT logic family operating at 5V. It features common direction control, 24 mA output drive capability, and 3-state outputs, making it ideal for high-speed data bus interfacing. Housed in a 48-pin SSOP package for dense board-level integration.

The 74AHCT16540DGVRE4 is a 16-bit buffer and line driver with 3-state outputs from Texas Instruments, featuring dual output enable control for flexible bus management. It operates with AHCT logic family compatibility, supports 48-pin SSOP packaging, and delivers high-speed signal buffering up to 3.3V/5V levels. Available in stock worldwide with competitive pricing for industrial and communication applications.

Latches 3.3V ABT 16B Transp D-Type Latches

Translation - Voltage Levels 32B LVTTL to GTLPBus Transceiver

Digital to Analog Converters - DAC 10-Bit 3 or 9 us DAC Serial Input

Inverters Dual Inverters

74ALVTH16244DLRG4, 16-Bit Buffer, Line Driver, 3-State Non-Inverting 2.7 to 3.6V 48-Pin SSOP

74ALVTH162245GRG4 is a 16-bit bidirectional non-inverting LVTTL bus transceiver from Texas Instruments, operating at 3.3 V supply with 30 pF load capacitance, housed in a 48-pin TSSOP for high-speed logic interfacing.

Use the download button to access the LP8864SQDCPRQ1 schematic symbol, PCB footprint, and 3D model.

Use the download button to access the CSD17507Q5A schematic symbol, PCB footprint, and 3D model.

The TLV320AIC33IRGZRG4 is a high-performance stereo audio codec IC from Texas Instruments, integrating ADC, DAC, and programmable audio processing in a 48-pin QFN (VQFN) package for portable consumer electronics. It requires a 1.65V to 1.95V core supply along with analog supply voltages, enabling low-power audio capture and playback in mobile devices. Available from authorized distributors with worldwide shipping.

Processor Supervisor 2.25V 1 Active High/Push-Pull 3-Pin SOT-23 T/R

16-bit Microcontrollers - MCU 25-MHz MCU with 256-KB flash, 16-KB SRAM, 12-bit ADC, DMA, UART/SPI/I2C, timer, HW multiplier 113-NFBGA -40 to 85

Current Sense Amplifiers -4-V to 110-V, 1.3-MHz, high-precision current sense amplifier 5-SOT-23 -40 to 125

Use the download button to access the LP8866SQDCPRQ1 schematic symbol, PCB footprint, and 3D model.

Voltage References Automotive, low-drift, low-power, small-footprint series voltage reference 5-SOT-23 -40 to 125

The Texas Instruments 74ALVC164245DLR is a 16-bit dual-supply non-inverting bus transceiver with LVTTL compatibility, housed in a 48-pin SSOP package for high-density PCB designs. It supports mixed-voltage bus interfacing with independent direction and output enable controls for each 8-bit port. Available from stock with worldwide shipping.

The MSP430F5528IYFF is a 16-bit RISC Flash Microcontroller from Texas Instruments running up to 25MHz with 47 I/O lines, built-in ADC, DMA, PWM channels, and USB capability in a 64-pin BGA package, operable down to 1.8V at 8MHz for ultra-low-power embedded applications. From $5.50 in stock with worldwide shipping.