Texas Instruments

Bus Transceivers 8 to 9-Bit Parity Bus Transceivers

Use the download button to access the TLC2933AIPWG4 schematic symbol, PCB footprint, and 3D model.

Use the download button to access the TPS63900DSKR schematic symbol, PCB footprint, and 3D model.

Conv DC-DC 2.7V to 36V Inv/Step Up/Step Down Single-Out 0.8V to 22V

RS-422 Interface IC LoVltg Hi-Sp Quad Diff Line Drvr

Voltage References

Texas Instruments SN74ALS29854DWG4 is an 8B-to-9B parity bus transceiver in the ALS logic family, housed in a 24-pin SOIC package with 300 pF load capacitance and 48 mA output sink current. It provides bidirectional data transfer with parity generation A-to-B and error detection B-to-A. Available from stock worldwide with competitive pricing.

The LM2936QMX-3.3/NOPB is an automotive-grade fixed 3.3V, 50mA low-dropout linear regulator from Texas Instruments, withstanding input voltages up to 60V with a typical dropout of only 0.2V. It is AEC-Q100 qualified for harsh automotive environments and supplied in an 8-pin SOIC tape-and-reel package. In stock from authorized distributors with worldwide shipping.

Current Sense Amplifiers 2.7 to 110V, 800kHz, ultra-precise current sense amplifier in small (sc-70) package

Texas Instruments SNJ54ALS873BJT is an 8-channel transparent D-type latch with 3-state outputs, clear function, and active-low enable in a 24-pin CDIP package, rated for military-grade operating conditions. Available from stock with worldwide shipping.

Flip Flop D-Type Bus Interface Pos-Edge 3-ST 2-Element 24-Pin CDIP Tube

Flip Flop D-Type Bus Interface Pos-Edge 3-ST 2-Element 24-Pin CDIP Tube

LM2576xx Series SIMPLE SWITCHER® 3-A Step-Down Voltage Regulator

Use the download button to access the TLV9104IPWR schematic symbol, PCB footprint, and 3D model.

DRV5053RAEDBZTQ1

Precision Amplifiers Dual, 14MHz, MUX-friendly, low-noise, zero-drift, RRO, CMOS precision operational amplifier 8-VSSOP -40 to 125

The UC2845D8TRG4 is a current-mode PWM switching controller from Texas Instruments in an 8-pin SOIC package. It operates from 7.6 V to 28 V input with a nominal 15 V supply, featuring cycle-by-cycle current limiting and programmable oscillator frequency. Available with worldwide shipping from authorized distributors.

Current Mode PWM Controller 200mA 500kHz 14-Pin SOIC T/R

Operational Amplifiers - Op Amps 40-V, dual 4.5MHz, rail-to-rail input/output, low-offset-voltage, low-noise op amp

Use the download button to access the DRV8353HMRTAT schematic symbol, PCB footprint, and 3D model.

TEXAS INSTRUMENTS - TPS62352YZGT - DC-DC Switching Sync- Buck (Step Down) Regulator, Adj., 2.7V-5.5Vin, 750mV-1.437V/0.8A out, DSBGA-12

Precision Amplifiers Low power, rail-to-rail input and output, 24-V, zero-drift operational amplifier 8-WSON -40 to 125

The XISO1640BDR is a robust-EMC bidirectional I2C digital isolator from Texas Instruments supporting up to 1 Mbps data rate and 5.5 V supply in an SOIC-8 package. It provides galvanic isolation between I2C bus segments with hot-plug and arbitration support, passing IEC 61000-4 EMC standards. Available in stock worldwide for industrial and medical isolation designs.

LDO Voltage Regulators Dual 200mA Out Lo Noise Hi PSRR

LDO Voltage Regulators Dual 200mA Out Low Noise High PSRR

Digital to Analog Converters - DAC Lo-Pwr R-To-R Output 12-Bit Serial Input

Gate Drivers 3-A, 120-V half bridge gate driver with 5-V UVLO, interlock and enable

Switching Controllers Integrated Circuits (ICs) PMIC - Voltage Regulators - PWMs (Pulse Width Modulation) - IC PWM CTRLR W/SD 16-SOIC

The TPS61378-Q1 is a fully-integrated synchronous boost converter with an integrated load disconnect function. The input voltage covers 2.3 V to 14 V while the maximal output voltage covers up to 18.5 V. The switching current limit is programmable from 1 A to 4.8 A. The device consumes 25-μA quiescent current from VIN. The TPS61378-Q1 employs peak current mode control with the switching frequency programmable from 200 kHz to 2.2 MHz. The device works in fixed frequency PWM operation in medium to h

Bus Transceivers Octal Bus Transceivr And Register

Texas Instruments CD74ACT540M96G4 is an octal inverting buffer and line driver from the ACT logic family with dual active-low output enable control. Features unidirectional data flow, 24mA output low current capability, 50pF load capacitance rating, and 20-pin SOIC package for high-drive bus interfacing. Available in tape-and-reel with RoHS-compliant lead-free construction. In stock worldwide with fast shipping.

Use the download button to access the ISO1640BDR schematic symbol, PCB footprint, and 3D model.

Supervisory Circuits Nanopower high-input voltage supervisor with manual reset and programmable-reset time delay 5-SOT-23 -40 to 125

SN75ALS194NE4 is a quad differential RS-422 line driver with 2 dual-channel driver functions compliant to EIA-422-B and V.11 standards. It drives balanced lines at TTL logic levels in a 16-pin DIP package. Available from stock with worldwide shipping.

16-bit Microcontrollers - MCU 25 MHz MCU with 128KB Flash, 8KB SRAM, 12-bit ADC, Comparator, DMA, UART/SPI/I2C, USB, HW Multiplier 80-NFBGA -40 to 85

High Speed Operational Amplifiers 12.6V, Low-noise, single-ended-to-differential, high input impedance amplifier

DAC 1-CH Current Steering 8-bit 16-Pin SOIC T/R

LMH2120UMX/NOPB is an integrated circuit by Texas Instruments. Key specs include JESD-30 Code: R-PBGA-B6; JESD-609 Code: e1. From RFQ price checks to worldwide shipping, FindMyChip supports sourcing.

Texas Instruments JL723SCA is a positive three-terminal voltage regulator and reference IC supporting 2V to 37V adjustable output and up to 150mA output current. Accepts 9.5V to 40V input in a 14-pin ceramic DIP package, suitable for precision regulated power supply designs.

Texas Instruments LM336BM-2.5 is a precision 2.5V shunt voltage reference in SOIC-8, with output voltage range of 2.44V to 2.54V and a two-terminal analog reference topology ideal for ADC and DAC biasing. Available from stock worldwide with fast shipping.

Latches Mil Enhance 3.3V ABT 16B Transp D-Type

Use the download button to access the LM60430DRPKR schematic symbol, PCB footprint, and 3D model.

Voltage References Adj MicroPwr Vtg Ref

The ADC122S655CIMMX/NOPB is a 2-channel, 12-bit successive approximation ADC from Texas Instruments with a 500 ksps sample rate in a 10-pin VSSOP package. It features a serial SPI interface, up to 5.5 V analog input range, and a maximum conversion time of 7.5 µs for high-speed data acquisition. Available with worldwide shipping from authorized distributors.

REF3425S-Q 2.5V - 6 PPM/C SOT23-5

Use the download button to access the TL783CKCSE3 schematic symbol, PCB footprint, and 3D model.

Use the download button to access the LM1875T/NOPB schematic symbol, PCB footprint, and 3D model.

Use the download button to access the PCM1840IRTWR schematic symbol, PCB footprint, and 3D model.

PARITY GENERATOR/CHECKER, 14 Pin, Ceramic, DIP

Analog to Digital Converters - ADC 8 Bit, 80 MSPS ADC Single Ch., High Ch. Bandwidth, Low Power 28-TSSOP 0 to 70