Texas Instruments

Analog to Digital Converters - ADC 16-channel 16-bit 1-MSPS dual simultaneous-sampling ADC with integrated analog front end (AFE)

Use the download button to access the TPS563207DRLR schematic symbol, PCB footprint, and 3D model.

The THS6002CDWPG4 is a dual high-speed differential line driver and receiver IC with 4 channels, supporting single-supply operation from 9V to 32V, housed in a 20-pin SOIC package. It integrates both transmit and receive functions for general-purpose differential signal interfaces. Available from authorized distributors with worldwide shipping.

Texas Instruments 74ALVCH16374DLG4 is a 16-bit D-type edge-triggered flip-flop bus driver with 3-state outputs in a 48-pin SSOP package, supporting 1.65 V to 3.6 V operation. With active-low output enable and 50 pF rated load capacitance, it suits high-speed 16-bit bus pipelining. Available from stock worldwide.

74ALVCH16501DGGRG4, Universal Bus Transceiver ALVC, 18-Bit Non-Inverting 1.65 to 3.6V 56-Pin TSSOP

74ALVCH162244GRG4, 16-Bit Buffer, Line Driver, 3-State Non-Inverting 1.65 to 3.6V 48-Pin TSSOP

Texas Instruments 74ALVTH16244GRG4 16-ChannelBuffer & Line Driver, 3-State, 48-Pin TSSOP

The 74ACT16825DLG4 is an 18-channel 3-state bus buffer and line driver from Texas Instruments in the ACT logic family, featuring dual active-low output enable controls for flexible bus management in a 56-pin SSOP package. It provides 24 mA sink current per output and supports a 50 pF load capacitance for driving high-capacitance backplane buses. Available from stock with worldwide shipping.

74AHCT16373DGGRG4, Hexadecimal D Type Latch Transparent 3 State 5V 48-Pin TSSOP

74CB3Q3257DBQRG4 is a quad 2:1 bidirectional bus-exchange multiplexer/demultiplexer from Texas Instruments in a 16-pin SSOP package. It operates at 1.65 V to 3.6 V with near-zero propagation delay for transparent signal routing. From $0.60 in stock with worldwide shipping.

Texas Instruments 74AHCT16245DLRG4, Dual Bus Transceiver, Bus Transceiver, 16-Bit Non-Inverting CMOS, 48-Pin SSOP

74ACT16652DLG4 is a 16-bit bidirectional registered bus transceiver in the ACT logic family housed in a 56-pin SSOP package. It features independent direction control and a select input for multiplexed registered or real-time data transmission at 50 pF load capacitance. Available from stock worldwide with competitive pricing for bus interface designs.

74ALVCHR16245GRG4 is a 16-bit non-inverting bidirectional bus transceiver from Texas Instruments operating at 1.65 V to 3.6 V with 50 pF load capacitance. It features active bus-hold inputs and active-LOW direction/enable controls in a 48-pin TSSOP package. Available from stock with worldwide shipping.

The 74ACT16543DLG4 is a 16-bit non-inverting dual latched bus transceiver from Texas Instruments in a 56-pin SSOP package. It operates at 5V with independent bidirectional control and separate output enable per direction for flexible bus interfacing. Available from stock with worldwide shipping.

Op Amp Single Low Power Amplifier R-R O/P ±8V/16V Automotive 8-Pin SOIC T/R

The 74AC11244DWG4 is an octal-channel buffer and line driver IC from Texas Instruments in the AC CMOS logic family, featuring 3-state outputs and dual-port configuration with 24 mA sink current capability per output for robust bus driving. It is housed in a 24-pin SOIC package and is RoHS compliant for modern PCB designs. Available from $0.60 in stock with worldwide shipping.

Use the download button to access the TMS320F28335ZAYA schematic symbol, PCB footprint, and 3D model.

The REF4132A40DBVRQ1 is an automotive-qualified precision voltage reference from Texas Instruments, offering 12 ppm/°C temperature coefficient with low noise and low power in a 5-pin SOT-23 package. It accepts input voltages from 3 V to 5.5 V making it suitable for automotive sensor and ADC reference applications. Available in stock with worldwide shipping at competitive pricing.

The SN74ALS29854DWE4 is an 8-to-9-bit parity bus transceiver IC from Texas Instruments in the ALS logic family, offered in a 24-pin SOIC package. It features bidirectional data transfer with parity generation A-to-B and error detection B-to-A using odd parity, with 48mA output sink current. Available from authorized distributors worldwide with in-stock inventory and global shipping.

The TLV9051 DCK is a single-channel low-power operational amplifier from Texas Instruments, housed in a compact 5-pin SOT-23 package for space-constrained designs. It offers rail-to-rail input and output operation with a low supply voltage for portable and battery-powered applications. Available in stock with worldwide shipping at competitive pricing.

32-bit Microcontrollers - MCU C2000 32-bit MCU with 100 MHz, 64 KB flash, 12 PWM 100-NFBGA -40 to 85

Texas Instruments 74ACT11244DWG4 is an octal 3-state buffer and line driver in a 24-pin SOIC package operating from 4.5 V to 5.5 V supply. Provides 24 mA output drive capability with ACT-logic speed suitable for bus-driving applications. Available from stock with worldwide shipping.

The INA293 is a high-precision current sense amplifier that can measure voltage drops across shunt resistors over a wide common-mode range from 4 V to 110 V. The negative common-mode voltage allows the device to operate below ground, thu

The 74ACT11000DG4 is a quad 2-input NAND gate IC from Texas Instruments in the ACT logic family, operating at 5V with 24mA output current capability. It features four independent NAND gates in a 16-pin SOIC package with center-pin VCC and GND for enhanced noise immunity. Available from stock worldwide with fast shipping.

The 74ACT11373DWG4 is an octal D-type transparent latch with 3-state outputs from Texas Instruments in the ACT logic family. It provides 8 latch channels with 3-state output control operating at 5V in a 24-pin SOIC package. RoHS e4 lead-free compliant with plastic/epoxy body for wide industrial and digital logic availability worldwide.

The OPA2607IDR is a dual-channel voltage-feedback operational amplifier from Texas Instruments, featuring ultra-low bias current of 0.01nA and a common-mode rejection ratio of 100dB typical. It is housed in an 8-pin SOIC package and is suitable for precision signal conditioning. Available from stock worldwide with fast shipping.

Texas Instruments 74AC16374DLG4 16-Bit D Type Flip Flop IC, 3-State, 48-Pin SSOP

74AC11074DG4, Dual D Type Flip Flop 3.3, 5V 14-Pin SOIC

Use the download button to access the TLV9304IDR schematic symbol, PCB footprint, and 3D model.

The LP38500TS-ADJ is a 1.5 A adjustable low-dropout linear regulator from Texas Instruments accepting inputs from 2.7 V to 5.5 V. It features a typical dropout voltage of 220 mV, 0.05%/V line regulation, and -40°C to 125°C operating temperature range. The FlexCap design in a 5-pin SOT-223 package suits portable and industrial power supply rails.

Audio Amp Speaker 1-CH Mono Class-AB 8-Pin WSON EP T/R

Use the download button to access the LP5009PWR schematic symbol, PCB footprint, and 3D model.

16-bit Microcontrollers - MCU 25-MHz MCU with 256-KB flash, 16-KB SRAM, 12-bit ADC, DMA, UART/SPI/I2C, timer, HW multiplier 113-NFBGA -40 to 85

32-bit Microcontrollers - MCU C2000 32-bit MCU with connectivity manager, 1x C28x+CLA CPU, 1.0-MB flash, FPU64, Ethernet

SOIC-14

Logic Comparators Octal Binary/BCD Idy Comparators w/Enable

Operational Amplifiers - Op Amps AEC-Q100, 2-channel, 10-MHz, low-noise, RRIO, CMOS operational amplifier for cost-optimized systems 8-SOIC -40 to 125

The PCM1840 is a high-performance, Burr-Brown™ audio analog-to-digital converter (ADC) that supports simultaneous sampling of up to four analog channels. The device supports differential line and microphone inputs with 2-VRMS full-scale signal. The device integrates microphone bias voltage, a phase-locked loop (PLL), a DC removal high-pass filter (HPF), and supports sample rates up to 192 kHz. The device supports time-division multiplexing (TDM), I2S, or leftjustified (LJ) audio formats, selectable

The SN74AHCT74PWRG4 is a dual positive-edge-triggered D-type flip-flop in the AHCT logic family. It operates at up to 65 MHz with 5V-compatible CMOS inputs and 8 mA output drive in a 14-pin SOIC package. Available from stock with worldwide shipping.

The TMS570LS10116BSPGEQR is a 32-bit ARM Cortex-R4F safety microcontroller running up to 80MHz with integrated ADC, DMA, and 68 I/O lines. It targets IEC 61508 SIL-3 functional safety applications and comes in a 144-pin LQFP package. Available from Texas Instruments with worldwide shipping.

Instrumentation Amplifiers ultra-low-noise, high-bandwidth instrumentation amplifier with fixed gain of 2000 8-SOIC -40 to 125

Use the download button to access the TLC2262AMJGB schematic symbol, PCB footprint, and 3D model.

Multiplexer Switch ICs 5-V, 8:1, 1-channel general-purpose multiplexer with 1.8-V logic control

Precision Amplifiers LinCMOS Precision Quad Op Amp

The LP8340CLDX-3.3 is a fixed 3.3V, 1A linear LDO voltage regulator from Texas Instruments, featuring a 0.54V nominal dropout voltage, excellent line regulation of 0.015% maximum, and an input range of 3.8V to 10V. It achieves high output accuracy with 0.075% maximum load regulation in a compact 6-pin WSON surface-mount package. Available in stock worldwide with fast global shipping.

The TPS7A2033PDQNR is a fixed 3.3V, 300mA positive LDO voltage regulator from Texas Instruments, featuring ultra-low 140mV maximum dropout voltage and 0.2376% line regulation in a miniature 4-pin X2SON package for space-constrained portable and IoT power designs. From $0.45 in stock with worldwide shipping.

Translation - Voltage Levels 24-bit dual-supply bus transceiver with configurable voltage translation and 3-state outputs 83-NFBGA -40 to 85

High Speed Differential Switch 2:1/1:2 MUX/DEMUX USB 3.1 3.3V T/R 20-Pin VQFN EP

Texas Instruments REF4132B33DBVR is a precision 3.3V voltage reference with ultra-low 12ppm/°C temperature coefficient and low noise in compact SOT-23-5 package. Supports 3V to 5.5V input and -40°C to 125°C range. RoHS compliant, in stock worldwide shipping.

Bus Transceivers 8 to 9-Bit Parity Bus Transceivers