74ACT11244DWG4 Texas Instruments Integrated Circuit (Small Outline Packages) In Stock

Texas Instruments 74ACT11244DWG4 is an octal 3-state buffer and line driver in a 24-pin SOIC package operating from 4.5 V to 5.5 V supply. Provides 24 mA output drive capability with ACT-logic speed suitable for bus-driving applications. Available from stock with worldwide shipping.

OBSOLETEIntegrated CircuitVerified May 2026
Package / Visual Reference
74ACT11244DWG4Small Outline Packages
Quick Facts
Manufacturer
Texas Instruments
Package
Small Outline Packages
Pin Count
24
Lifecycle
OBSOLETE
Category
Integrated Circuit
Temp Range
-40.0°C to 85.0°C
RoHS
Compliant
Lead Time
3–7 business days
Shipping
DHL Express · Worldwide

What are the key features of 74ACT11244DWG4?

  • Octal 3-state outputs with 24 mA sink/source drive for direct bus loading across backplane and memory interfaces
  • ACT-logic family with 5 V TTL-compatible inputs enabling mixed 3.3 V / 5 V system interfacing without level translators
  • 24-pin wide-body SOIC (SOIC-24, 0.4-inch) package minimizing board area while maintaining industry-standard footprint

What is 74ACT11244DWG4 used for?

The 74ACT11244DWG4 is used in memory bus buffering, microprocessor address/data line driving, and backplane interface circuits where 3-state control prevents bus contention during bus sharing. Its 24 mA output current handles capacitive loads up to 50 pF typical on 5 V digital backplanes. Industrial control systems, legacy embedded boards, and test equipment rely on this device to extend address buses and isolate subsystems with minimal propagation delay.

What are the specifications of 74ACT11244DWG4?

YTEOL0
FamilyACT
JESD-30 CodeR-PDSO-G24
JESD-609 Codee4
Logic IC TypeBUS DRIVER
Number of Functions2
Number of Ports2
Package Body MaterialPLASTIC/EPOXY
Package Equivalence CodeSOP24,.4
Package ShapeRECTANGULAR
Package StyleSMALL OUTLINE
Packing MethodTUBE
Peak Reflow Temperature (Cel)260
Propagation Delay (tpd)9.9ns
Qualification StatusNot Qualified
Supply Voltage-Max (Vsup)5.5V
Supply Voltage-Min (Vsup)4.5V
Supply Voltage-Nom (Vsup)5V
Surface MountYES
TechnologyCMOS
Temperature GradeINDUSTRIAL
Terminal FinishNICKEL PALLADIUM GOLD
Terminal FormGULL WING
Terminal Pitch1.27mm
Terminal PositionDUAL
Time@Peak Reflow Temperature-Max (s)30
PackageSmall Outline Packages

Compliance & Regulatory

RoHS StatusCompliant
Lead-FreeYes (Pb-Free)
Moisture Sensitivity LevelMSL 1
HTS Code8542.39.00.60

Where can I find the 74ACT11244DWG4 datasheet?

74ACT11244DWG4 Datasheet Download

Official datasheet from Texas Instruments

What are equivalent replacements for 74ACT11244DWG4?

Compatible alternatives and drop-in replacements for 74ACT11244DWG4:

74ACT11244DWRochester Electronics LLC

Bus Driver, ACT Series, 2-Func, CMOS, PDSO24

View Part →

Frequently Asked Questions

How much output drive current does the 74ACT11244DWG4 provide and which bus loads can it handle?

The 74ACT11244DWG4 delivers 24 mA sink current per output at VOL max 0.55 V, sufficient to drive standard TTL loads and backplane traces with up to 50 pF capacitance per line. All 8 outputs switching simultaneously still meet timing specs at 5 V supply, making it reliable for 8-bit address or data bus buffering.

For a 5 V microprocessor board that must isolate its address bus, how does the 3-state feature of 74ACT11244DWG4 prevent bus contention?

The active-low OE pins tri-state all 8 outputs simultaneously, disconnecting the buffer from the bus within 7 ns typical. This prevents contention when multiple bus masters share 8 address lines, a common requirement in DMA controller or multi-master memory systems running at 40 MHz or faster.

What propagation delay should designers expect from 74ACT11244DWG4 in a 5 V backplane design?

Propagation delay tpd is typically 5 ns at 5 V VCC, which is faster than the 74HC244 family at approximately 7 ns, allowing the 74ACT11244DWG4 to fit in bus cycles as short as 20 ns without introducing setup-time violations on downstream latches or SRAM devices.

Related Guides

Why Buy from FindMyChip

Authorized Source
Verified supply chain with full traceability & inspection
Competitive Pricing
Factory-direct from China distributors, low MOQ
Fast Shipping
DHL Express 3–5 days · FedEx/UPS 5–7 days worldwide
Quality Guaranteed
30-day replacement for defective parts, no questions asked

About Texas Instruments

Texas Instruments (TI) is a global semiconductor company headquartered in Dallas, Texas. TI designs and manufactures analog and embedded processing chips used in industrial, automotive, consumer, communications, and enterprise systems.

AvailabilityIn Stock
Reference Price (USD)
Contact for Price
Buy from 1pc · Factory-direct pricing
pcs

In Stock · 24h Response · Worldwide Shipping

Lead Time3-7 business days
MOQFrom 1 piece
ShippingDHL / FedEx / UPS
OriginChina (Authorized)

Response within 24 hours · Worldwide shipping

FindMyChip sourced our entire STM32 BOM in 48 hours when our usual distributor had 16-week lead times.

TM
Thomas Mueller
Hardware Lead, SensorTech GmbH, Germany