Texas Instruments

Operational Amplifiers - Op Amps

Use the download button to access the TLV4011DCKR schematic symbol, PCB footprint, and 3D model.

LDO Voltage Regulators 2-A, low-VIN (1.1-V), low-noise, high-accuracy, ultra-low-dropout (LDO) voltage regulator 12-VQFN-HR -40 to 125

Octal Buffers And Line Drivers With 3-State Outputs

LDO Voltage Regulators 200-mA, nanopower-IQ (200 nA), low-dropout (LDO) voltage regulator with enable 5-SOT-23 -40 to 125

LDO Voltage Regulators 200-mA, nanopower-IQ (25 nA), low-dropout (LDO) voltage regulator with enable 5-SOT-23 -40 to 125

IC REG CTRLR PUSH-PULL 8SOIC

Use the download button to access the ISO7741BDWR schematic symbol, PCB footprint, and 3D model.

LDO Voltage Regulators 200-mA, low-dropout voltage regulator with low-IQ & enable 6-WSON -40 to 125

TEXAS INSTRUMENTS - SN74S04N . - Inverter, 74S04, 1 Input, 20 mA, 4.75 V to 5.25 V, DIP-14

LDO Voltage Regulators 250-mA, low-noise, high-PSRR, low-IQ, ultra-low-dropout voltage regulator with low-IQ & enable 4-DSBGA -40 to 125

Use the download button to access the UCC2913DG4 schematic symbol, PCB footprint, and 3D model.

IC PHASE LOCK LOOP HP 14-TSSOP

Supervisory Circuits Pwr Supply Sequencer & Monitor

Registers 4-By-4 Register Files With Open-Collector Outputs 16-PDIP 0 to 70

UCCx81xA BiCMOS Power Factor Preregulat

ARM Microcontrollers - MCU Tiva C Series Microcontroller

Low power current mode push-pull PWM with discharge transistor, 12.5/8.3V UVLO, 0°C to 70°C

110-V active clamp current mode PWM controller with N-channel clamp FET and 0.75V CS threshold

Switching Controllers Current Mode PWM Controller 8-CDIP -55 to 125

TXB0102 2-Bit Bidirectional Voltage-Level Translator With Auto Direction Sensing and ±15-kV ESD Protection

Supervisory Circuits Pwr Supply Sequencer & Monitor

Economy low power BICMOS 1MHz current mode PWM with 9.4V/7.4V UVLO and 50% duty cycle, 0C to 70C

12-Rail Power Supply Sequencer and Monitor with ACPI Support

Low-Power BiCMOS Current-Mode PWM

Switching Controllers Low-Pwr Current-Mode Push-Pull PWM

100-μA typical starting supply current • 500-μA t

DGK

500-mA, 10-V, low-IQ, low-dropout voltage regulator with power good & enable

cdip

Economy primary side controller with 10V/8V UVLO, -40C to 85C

The UC1854J is a high power factor preregulator IC from Texas Instruments, designed for current-mode PWM control. It supports input voltages from 15V to 30V and comes in a 16-pin ceramic DIP package, enabling efficient power factor correction in industrial power supplies.

Input Supply Voltage, VIN . . . . . . . . . . . . . . . . . . . . . . . . . . 40V Reference Output Current . . . . . . . . . . . . . . . . . . . . . . . –10mA Driver Output Currents . . . . . . . . . . . . . . . . . . . . . . . . . . –35mA Status Indicator Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . 40V Status Indicator Current . . . . . . . . . . . . . . . . . . . . . . . . . . 20mA

Nano-Power Touch Screen Controller with SPI Serial Interface

Run electrical simulations to see important waveforms and circuit performance • Run thermal simulations to understand board thermal performance • Export customized schematic and layout into popular CAD formats • Print PDF reports for the design, and share the design with colleagues

LDO Regulator Pos 1.6V 0.5A 20-Pin HTSSOP EP T/R

The UC1543J/883B is a military-grade power supply supervisory circuit from Texas Instruments in a 16-pin ceramic DIP package. It operates across a -55°C to +125°C temperature range for high-reliability applications. Available from stock with worldwide shipping.

Use the download button to access the UC1706J schematic symbol, PCB footprint, and 3D model.

Advanced 40 VCC, double ended 300kHz voltage mode PWM controller with 45% duty cycle, -55C to 125C

4-Bit Bidirectional Voltage-Level Shifter for Open-Drain and Push-Pull Applications

This TXB0104 4-bit noninverting translator uses two separate configurable power-supply rails. The A port is designed to track VCCA. VCCA accepts any supply voltage from 1.2 V to 3.6 V. The B port is designed to track VCCB. VCCB accepts any supply voltage from 1.65 V to 5.5 V. This allows for universal low-voltage bidirectional translation between any of the 1.2-V, 1.5- V, 1.8-V, 2.5-V, 3.3-V, and 5-V voltage nodes. VCCA must not exceed VCCB.

Switch ICs - Various Auto Audio Accessory Detection

1394 Interface IC Mil Enh 3-Port Cable Xcvr/Arbiter

TPS79525DCQRG4

TPS51461RGET

The devices, which operate over an input range of 2.5 V to 24 V, are stable with any capacitor greater than or equal to 0.47 μF.

tralow 85µA Typical Quiescent Current a voltage-driven device, the quiescent current is very low and independent of output loading (typically 85µA • Fast Transient Resp

TPS752xxQ with RESET Output, TPS754xxQ with Power Good Output ST-TRANSIENT-RESPONSE 2-A LOW-DROPOUT VOLTAGE REGULATORS

The TPS723 low-dropout (LDO) negative voltage regulator offers an ideal combination of features to support low noise applications. This device is capable of operating with input voltages from –10 V to –2.7 V, and support outputs from –10 V to –1.2 V. This regulator is stable with small, low-cost ceramic capacitors, and include enable (EN) and noise reduction (NR) functions. Thermal short-circuit and over-current protections are provided by internal detection and shutdown logic. High PSRR (65 dB at

1.5-A, ultra-low-dropout voltage regulator with low-IQ & power good