Texas Instruments

Audio D/A Converter ICs Low-Power Portable Aud Converter

Voltage References

Voltage References Automotive, low-drift, low-power, small-footprint series voltage reference 8-VSSOP -40 to 125

Gate Drivers Automotive 3-A, 120-V half bridge driver with 5-V UVLO, interlock and enable 8-SOIC -40 to 125

Voltage References Automotive, low-drift, low-power, small-footprint series voltage reference 5-SOT-23 -40 to 125

Use the download button to access the SN74AC573DBRG4 schematic symbol, PCB footprint, and 3D model.

Use the download button to access the TPS543320RPYR schematic symbol, PCB footprint, and 3D model.

TPS55165-Q1 is an automotive-grade solar-to-battery charging controller IC from Texas Instruments in a small outline package. It provides maximum power point tracking (MPPT) for solar panel energy harvesting and efficient battery charging. Available from stock worldwide with competitive pricing.

The SNJ54ACT573J is an 8-channel transparent D-type latch with tri-state outputs in a 20-pin ceramic DIP package. It features active-low output enable, 50 pF load capacitance, and ACT-family CMOS-to-TTL compatibility for reliable bus driving. From $4.00 in stock with worldwide shipping.

Counter Shift Registers 8-bit parallel-load shift registers

1394 Interface IC Enhanced product IEEE 1394b three-port cable transceiver/arbiter

The TMS320VC5509AGHHR-108 is a 16-bit fixed-point digital signal processor from Texas Instruments in a 179-ball PBGA package. It features a 33 MHz maximum clock frequency, 22-bit address bus, 16-bit external data bus, and JTAG boundary scan support for advanced debugging. Available with in-stock inventory for fast worldwide delivery.

LDO Voltage Regulators 300-mA, ultra-low-noise, low-IQ, low-dropout (LDO) linear regulator with high PSRR 5-SOT-23 -40 to 125

Texas Instruments LM5113SDE is a 100 V half-bridge gate driver capable of sourcing and sinking 5 A peak gate current. It integrates Schmitt trigger inputs and supports GaN FET and MOSFET switching in compact power converter and motor drive designs.

Precision Amplifiers LinCMOS Precision Dual Op Amp

Use the download button to access the TPA6111A2DGNR schematic symbol, PCB footprint, and 3D model.

The SNJ54ABT125J is a military-grade quad bus buffer and line driver IC from Texas Instruments featuring 4 non-inverting channels with 3-state output control and ABT BiCMOS technology. It offers active-low enable control, 50 pF load capacitance, and typical output low voltage under 1V at 5V supply. Available in 14-pin ceramic DIP package for demanding high-reliability applications.

Multiplexer Switch ICs 2-channel, 4:1 general-purpose analog multiplexer with 1.8-V logic control

Switching Voltage Regulators Automotive 3-V to 36-V, 4-A, low-noise fixed frequency synchronous step-down converter

The MSP430F5659IZQWR is a 16-bit ultra-low-power microcontroller with 512KB Flash, USB, ADC, DAC, and DMA running up to 32 MHz in a compact 113-ball BGA package. It integrates USB connectivity and operates down to 1.8V at 8 MHz for battery-powered applications. From stock with worldwide shipping.

LMQ62440 Q1 Automotive 3 V to 36 V 4 A Low EMI Synchronous Step Down Quiet Converter

Scan Test Device

Conv DC-DC 3.25V to 5.5V Synchronous Step Down Single-Out 2.85V 1.6A 6-Pin DSBGA T/R

LMQ62440 Q1 Automotive 3 V to 36 V 4 A Low EMI Synchronous Step Down Quiet Converter

Texas Instruments ADS7823E/2K5 is a 12-bit low-power successive-approximation ADC with I2C serial interface and single analog input channel. Supports up to 5.25 V analog input, offered in an 8-pin SOIC package. Available from stock with worldwide shipping.

High-performance, quad, low-voltage, push-pull comparator

The SNJ54ACT00J is a quad 2-input NAND gate IC from Texas Instruments in the military-grade ACT CMOS logic family, providing four independent NAND gate functions with 24 mA output sink current in a 14-pin ceramic DIP package. It is designed for high-reliability and harsh environment applications with guaranteed military temperature range performance. Available from stock with worldwide shipping.

Texas Instruments SNJ54ABT244J is an octal buffer and line driver with 3-state outputs in the ABT logic family, rated for -55°C to 125°C military temperature range. Features 50 pF load capacitance, active-low output enable, and ceramic DIP-20 package for rugged applications. In stock with worldwide shipping.

Use the download button to access the CY54FCT138TDMB schematic symbol, PCB footprint, and 3D model.

DRV8428E P Dual H Bridge Motor Drivers With Integrated Current Sense and Smart Tune Technology

Logic Gates Quadruple 2-Input Positive-AND Gates

The SN7486N3 is a quad 2-input XOR gate IC from Texas Instruments in the standard TTL logic family, containing four independent exclusive-OR gates on a single chip operating from a 5V supply. It is housed in a 14-pin 0.300-inch plastic DIP package for reliable through-hole PCB assembly and breadboard prototyping. Available in stock worldwide with fast global shipping.

8-Channel Single ADC SAR 140ksps 12-bit Serial Automotive T/R

Operational Amplifiers - Op Amps Wide-Input-Vltg Quad Op Amp R-To-R Output

Transimpedance Amplifiers 1.1-GHz unity-gain bandwidth, 0.9 nV/vHz, bipolar input amplifier

The SN74CBTD3384PWLE is a 5-bit TTL-compatible unidirectional bus switch from Texas Instruments in a 24-pin TSSOP package. It features active-low enable control with 50 pF load capacitance support for high-speed bus switching. Available from stock worldwide with competitive pricing.

DRV8428 Stepper Driver With Integrated Current Sense 1 256 Micro stepping STEP Interface and smart tune Technology

The ADS7823EB/2K5 is a 12-bit single-channel successive approximation ADC by Texas Instruments with a 50 ksps sample rate and serial interface. Key specs: 1 analog input, 5.25 V maximum input voltage, and 0.0244% maximum linearity error. Available in an 8-pin VSSOP package, in stock with worldwide shipping.

Digital to Analog Converters - DAC 16B 1.0 GSPS 2x-4x Interpolating DAC

DRV8428EPWPR

Battery Management Automotive SPI/UART communication interface functional-safety compliant with automatic host wakeup

Gate Drivers

Operational Amplifiers - Op Amps 1.2V Ultra-low voltage, 350kHz-power saving dual op amp for cost-optimized, battery powered systems

Use the download button to access the TLV9042IPWR schematic symbol, PCB footprint, and 3D model.

Use the download button to access the TLV9042IDSGR schematic symbol, PCB footprint, and 3D model.

The TLV9042IDR is a dual-channel general-purpose operational amplifier from Texas Instruments with rail-to-rail input and output. It features ultra-low input bias current of 12 fA max, 89 dB typical CMRR, and 75 dB minimum CMRR for precision signal conditioning. Available in SOIC-8 package, RoHS compliant, in stock with worldwide shipping.

Current Sense Amplifiers AEC-Q100 -4-V to 110-V, 1.3MHz, ultra-precise current-sense amplifier

Use the download button to access the LM393LVDR schematic symbol, PCB footprint, and 3D model.

Texas Instruments TLV9042IDDFR is a dual micropower operational amplifier with rail-to-rail input and output, operating from ±2.75V or 5.5V single supply. Features voltage-feedback architecture with 89dB nominal CMRR, 75dB minimum CMRR, and ultra-low 12pA maximum bias current for precision low-power signal conditioning. Available in 8-pin SOT-23 package with RoHS-compliant construction. In stock worldwide with fast shipping.

INA293B2QDBVRQ1