Texas Instruments

USB Interface IC Dual USB billboard for USB-PD devices with integrated 5-V load switch 96-NFBGA -10 to 85

Switching Voltage Regulators 6A Sync Buck Converter

Universal Bus Functions 18-Bit Univ Bus Trncvr W/3-St Otpt

The CD74HC4053MG4 is a high-speed CMOS triple 2-channel analog multiplexer and demultiplexer from Texas Instruments, featuring three independent single-pole double-throw switches with 180 MHz bandwidth and up to 6V input voltage. It enables analog signal routing in low-power CMOS designs. Available in 16-pin SOIC package with worldwide availability.

Use the download button to access the LM2596S-ADJ/NOPB schematic symbol, PCB footprint, and 3D model.

Switching Voltage Regulators

The LMH6733MQX/NOPB is a triple 480 MHz current-feedback operational amplifier from Texas Instruments in a 16-pin SSOP package, offering 53 dB minimum common-mode rejection ratio and 19 µA maximum bias current. Ideal for video signal processing and high-frequency amplifier applications requiring three matched channels. Available lead-free with worldwide distribution.

Precision Amplifiers Dual Precision Single Supply uPower

Analog to Digital Converters - ADC 10-Bit 600 ns A/D Converter with Input Multiplexer and Sample/Hold 28-SOIC -40 to 85

MCU 16-bit MSP430 RISC 96KB Flash 2.5V/3.3V 80-Pin LQFP T/R

PCM Audio Codec 2ADC / 2DAC Ch 42-Pin DSBGA T/R

GREEN, PLASTIC, MS-012AC, SOIC-16

Switching Voltage Regulators 6A Sync Buck Converter

The LM5117QPMHENOPB is an automotive-qualified wide input range synchronous buck controller from Texas Instruments, housed in a 20-pin HTSSOP package and rated for AEC-Q100 Grade 1 operation. It supports duty cycles from near 0% to 100% with peak-current mode control for stable regulation across demanding automotive and industrial voltage conversion applications. Available in stock worldwide for high-voltage automotive DC-DC power supply designs.

Digital to Analog Converters - DAC 8-Bit Micro Power Digital-to-Analog Converter with Rail-to-Rail Output 6-SOT -40 to 105

Switching Controllers Low-Power BiCMOS Current-Mode PWM

Switching Voltage Regulators 3A STEP-DOWN VLTG REG

Use the download button to access the INA186A1QDBVRQ1 schematic symbol, PCB footprint, and 3D model.

The SN74BCT2240NSRG4 is an octal buffer and line driver IC from Texas Instruments, featuring two independent 4-bit groups with active-low enable control and unidirectional signal flow. Built on the BCT/FBT logic family, it provides 12 mA output drive current per channel, supports 50 pF capacitive loads, and is housed in a 20-pin SOIC package. It is suitable for bus-driving, memory interface, and signal buffering applications.

Operational Amplifiers - Op Amps Programmable Lo-Pwr Op Amp

The CLVTH16835IDGGREP is a military-enhanced 18-bit universal bus driver from Texas Instruments' LVT 3.3V logic family in a 56-pin SSOP package. It features 64 mA output drive, unidirectional data flow with active-low enable control, and enhanced reliability screening for defense and high-reliability computing applications requiring wide bus drive.

Video Amplifiers 3-Channel Low Power SDTV

Use the download button to access the TLV9104IDR schematic symbol, PCB footprint, and 3D model.

Operational Amplifiers - Op Amps Adv LinCMOS Rail to Rail MicroPwr Dual

Operational Amplifiers - Op Amps Dual Lo Vltg Lo Pwr RRO

The SN74LVC1G58YEAR is a single 3-input majority logic gate from Texas Instruments in the LVC logic family, outputting HIGH when two or more of the three inputs are HIGH, with 3-state output capability. It is housed in a ultra-compact 6-ball BGA package (2x3, 0.20mm pitch) supporting 1.65V to 5.5V operation for advanced low-voltage digital systems. Available in stock worldwide for space-critical consumer and IoT designs.

The V62/04718-01XE is a military-enhanced 18-bit universal bus driver from Texas Instruments' LVT (Low-Voltage Technology) family operating at 3.3V. It features unidirectional data flow with active-low enable control, 64 mA output drive current, and is housed in a 56-pin SSOP package. Qualified for high-reliability defense and space electronics applications.

40-V Current Sense Amplifier for Cost-Sensitive Systems

Analog to Digital Converters - ADC 16-Bit 15SPS D-S

Current Sense Amplifiers AEC-Q100, 40V, bi-directional, high-precision current sense amplifier w/ picoamp IB & ENABLE 5-SOT-23 -40 to 125

Use the download button to access the INA186A5QDBVRQ1 schematic symbol, PCB footprint, and 3D model.

Switching Controllers BiCMOS Low-Power Current Mode

Switching Controllers Automotive BiCMOS low-power current-mode PWM controller 8-SOIC -40 to 125

The SN74ABT162601DLG4 is an 18-bit universal registered bus transceiver with 3-state outputs from Texas Instruments in the ABT logic family. It features independent output enable for each direction, clock enable, and synchronous operation, packaged in a 56-pin SSOP for high-density backplane and bus interface designs.

Universal Bus Functions 12-24 Reg Bus

Buffers & Line Drivers

Board Mount Temperature Sensors +/-1degC Remote and Local Temp SENSOR

Operational Amplifiers - Op Amps Dual uPwr Lo-Voltage Op Amp

Counter Shift Registers CMOS 64-St Static Shift Reg

Ethernet ICs Gbps Ethernet Trncvr W/Half Rate Option

The TLC25L2CPW is a dual low-power, low-voltage operational amplifier from Texas Instruments featuring ultra-low input bias current of 0.06 pA and rail-to-rail output swing. It operates on supply voltages from 1.4 V to 16 V with 65 dB minimum CMRR and is packaged in a 14-pin SOIC for portable and battery-powered applications.

Switching Controllers BiCMOS Low-Power Current Mode

Analog Comparators Micropower small size comparator (dual, open-drain output) 8-VSSOP -40 to 125

Thermostats

Digital to Analog Converters - DAC Dual-Channel 14-Bit, 8.4-GSPS

Bus Transceivers Quad Bus Xceiver

Flip-Flops Octal DType Edge TRIGRD Flip-Flops

Use the download button to access the TPS92520QDADRQ1 schematic symbol, PCB footprint, and 3D model.

LDO Voltage Regulators

The TL431AQDBVRG4 is a precision adjustable shunt voltage regulator from Texas Instruments, with output adjustable from 2.495V to 36V, 100 mA sink current capability, 5-pin SOT-23 package, and high accuracy for power supply feedback. Available in stock worldwide.