Texas Instruments

The CD74ACT273M96E4 is an octal D-type flip-flop with reset from Texas Instruments in the ACT logic family. It supports clock frequencies up to 85MHz, handles 50pF load capacitance, and is housed in a 20-pin SOIC package. Available lead-free and RoHS-compliant for digital logic and data storage applications.

ADC08060CIMTX is an 8-bit single-channel analog-to-digital converter from Texas Instruments using resistance ladder architecture with a maximum conversion time of 16ns and 3.6V analog input. It is housed in a 24-pin TSSOP surface-mount package. Available in stock with worldwide shipping.

Operational Amplifiers - Op Amps Very Low-Noise High Speed 12V CMOS

GREEN, PLASTIC, MS-012AA, SOIC-8

LDO Voltage Regulators High PSRR Fast RF High-Enable 500mA

Bus Transceivers Octal Bus Trnscvrs With 3-State Outputs

Ethernet ICs Dual Signal Cndsning Transceiver

Digital to Analog Converters - DAC 12-Bit 1 us DAC Serial Out

PLASTIC, MS-001BB, DIP-16

Battery Management Overvoltage Protection for 2-Series, 3-Series, and 4-Series Cell Li-Ion 8-WSON -40 to 110

Data Acquisition ADCs/DACs - Specialized Automotive reinforced isolated delta-sigma modulator for voltage sensing with +/-1-V input range

Logic Gates Dual 4-Input Positive-NAND gates

LDO Voltage Regulators

Use the download button to access the TLV2254IDG4 schematic symbol, PCB footprint, and 3D model.

Supervisory Circuits Pwr Supply Sequencer and Monitor

The CD4021BNSRG4 is a CMOS 8-Stage Static Parallel-In Serial-Out Shift Register from Texas Instruments in a 16-pin SOIC package. It operates at up to 3 MHz clock frequency with a 50 pF load capacitance, featuring additional tap outputs at stages 6 and 7. Available from stock with worldwide shipping.

Use the download button to access the ADS7824UBG4 schematic symbol, PCB footprint, and 3D model.

Gate Drivers Automotive, single channel isolated gate driver for SiC/IGBT with advanced protection and high-CMTI 16-SOIC -40 to 125

Analog Comparators Single Differential

LIN Transceivers Automotive local interconnect network (LIN) transceiver with WAKE/INH and 58V bus fault protection 8-SON -40 to 125

Flip-Flops Octal D-Type Flip-Flop w/Clear

Analog to Digital Converters - ADC R 926-A104S021CIMMXNPB

LDO Voltage Regulators Automotive 300-mA, off-battery (40-V), ultra-low-IQ, low-dropout voltage regulator with enable 5-TO-252 -40 to 150

Audio DSPs 8Ch Dig Aud PWM Proc

Flip-Flops 6-bit D-type positive-edge-triggered flip-flops with clock enable 16-SOIC 0 to 70

Counter Shift Registers 8B Shift Registr

Phase Locked Loops - PLL Lo Jitter PLL Based Multiplier/Divider

LDO Voltage Regulators Ultra-Low Quiescent Current LDO Voltage Regulator 8-SOIC

Texas Instruments SN74AUP1G08DSF2 2-Input AND Logic Gate, 6-Pin SON

V-Ref Precision 4.096V 20mA 5-Pin SOT-23 T/R

LSSOP, TSOP5/6,.11,37

32-bit Microcontrollers - MCU

V-Ref Precision 3V 20mA 5-Pin SOT-23 T/R

DAC 2-CH R-2R 16-bit 10-Pin WSON T/R

LDO Voltage Regulators Low-Noise Low Input Voltage 50mA

Counter Shift Registers 8 Bit Shift Register

Phase Locked Loops - PLL Lo Jitter PLL Based Multiplier/Divider

Voltage References Precision Micropower Shunt Vltg Ref

POWER, PLASTIC, TQFP-48

Operational Amplifiers - Op Amps Quad Rail To Rail Lo Vltg Lo Power

Use the download button to access the DAC80502DRXT schematic symbol, PCB footprint, and 3D model.

LDO Voltage Regulators Sgl Output LDO 250mA Fixed 1.3V

Universal Bus Functions 18-Bit Univ Bus Trncvr W/3-St Otpt

Operational Amplifiers - Op Amps

The DS26C31MJ-MLS is a quad RS-422 differential line driver IC from Texas Instruments, providing four independent balanced differential output channels compliant with EIA RS-422 and CCITT V.11 standards in a ceramic 16-pin DIP package. It supports data rates up to 20Mbps and operates over the military temperature range. Ideal for robust long-distance serial data transmission in harsh environments.

Touch Screen Controllers Prog 4-Wire w/20-Bit Stereo Audio Codec

The LMC6681BIN is a single rail-to-rail input and output CMOS operational amplifier from Texas Instruments, featuring ultra-low bias current of 80fA maximum for high-impedance sensor interfaces. It delivers 82dB typical common-mode rejection ratio, voltage-feedback architecture, and operates from a single 2.7V to 16V supply in an 8-pin DIP package. Ideal for precision photodetector amplifiers, pH meters, and electrometer-grade measurement instruments.

The LMC6681BIN/NOPB is a single-supply, rail-to-rail input and output CMOS operational amplifier from Texas Instruments, optimized for low-voltage applications. It features ultra-low input bias current in the femtoampere range, wide supply voltage range, and is housed in a DIP package, making it ideal for precision analog signal conditioning and sensor interface circuits.

Operational Amplifiers - Op Amps

500-mA, 4-MHz, 2.85-Vout High-Efficiency Step-Down Converter in Chip Scale Packaging