Texas Instruments

Gate Drivers Automotive 40-V H-bridge smart gate driver with offline diagnostics & inline current sense am

V62/18622-02XE is a low-drift low-power series voltage reference from Texas Instruments, providing a precise 4.1 V output with input voltage range of 4.15 V to 12 V in a compact 6-pin SOT-23 package. Operates across -55°C to 125°C temperature range for demanding industrial and aerospace applications. Available from stock with worldwide shipping.

Hot Swap Controller 1-CH -12V N-Channel Negative Voltage 14-Pin TSSOP T/R

Analog to Digital Converters - ADC Dual, 16-bit, 0.5-MSPS to 65-MSPS, low-noise, ultra-low-power analog-to-digital converter (ADC) 40-WQFN -40 to 105

2-Channel Dual ADC SAR 65Msps 18-bit Serial (0.5-Wire, 1-Wire, 2-Wire)/LVDS 40-Pin WQFN EP T/R

Logic Gates SNGL 2Input Pos OR Gate

32-bit Microcontrollers - MCU C2000 32-bit MCU w/ connectivity manager, 1x C28x+CLA CPU, 1.0-MB flash, FPU64, CLB, ENET, EtherCAT 176-HLQFP -40 to 125

Flip-Flops 16-Bit D-Ty Edg-Trig F-F W/3-State Otpt

Use the download button to access the SN74LVC86ARGYR schematic symbol, PCB footprint, and 3D model.

DIP MODULE-5

Use the download button to access the CSD18535KTTT schematic symbol and PCB footprint.

Digital to Analog Converters - DAC Automotive, 8-bit, 1 -channel, smart DAC

High Speed Operational Amplifiers Dual channel, low power, precision, 50-MHz decompensated CMOS op amp for cost sensitive systems

LDO Voltage Regulators Automotive adjustable- and fixed-output, 1-A, 16-V, positive-voltage low-dropout linear regulator 8-SON -40 to 150

Use the download button to access the CD4067BM96G4 schematic symbol, PCB footprint, and 3D model.

Operational Amplifiers - Op Amps Industry-standard dual operational amplifiers for automotive applications 8-VSSOP -40 to 125

Board Mount Hall Effect/Magnetic Sensors Two-wire (current output), high-voltage (up to 38V), high-precision switch 3-SOT-23 -40 to 125

Op Amp Single High Output Drive Amplifier R-R O/P 5.5V 8-Pin HVSSOP EP Tube

Use the download button to access the DRV8256PRGER schematic symbol, PCB footprint, and 3D model.

Motor/Motion/Ignition Controllers & Drivers 102-V max 3-phase Functional Safety Quality-Managed smart gate driver 32-WQFN -40 to 125

TPS274160x 40 V 160 m u03A9 Quad Channel Industrial Smart High Side Switch

Digital to Analog Converters - DAC 8bit DAC 4Chl

Battery Protection Li-Ion/Li-Pol 6-Pin WSON T/R

Supervisory Circuits Low-power voltage supervisor (reset IC) with active-low open-drain output 3-SOT-23 -40 to 125

Precision Amplifiers Adv LinEPIC Self-Cal Precision Single

LDO Voltage Regulators Single Output LDO 150mA Fixed(3.3V)

LVDS Interface IC Programmable 27-Bit Display Serial Interface Transmitter 80-NFBGA -40 to 85

LDO Voltage Regulators Automotive 1-A, low-IQ, high-PSRR, low-dropout (LDO) voltage regulator with power good 8-SON -40 to 125

5962-8759401YA is a military-grade micropower two-terminal voltage reference diode from Texas Instruments with a nominal output of 1.2V and tight voltage accuracy. It integrates precision reference functionality in a 10-lead SOIC package with an output voltage range of 1.2V to 1.247V. Available from stock with worldwide shipping.

Precision Amplifiers Automotive, quad channel, high precision, 36-V, 10-MHz, rail-to-rail input output op amp 14-TSSOP -40 to 125

Use the download button to access the LM393LVQDRQ1 schematic symbol, PCB footprint, and 3D model.

1-A Low Dropout Regulator

TPS7A03 Nano power IQ 200 nA 200 mA Low Dropout Voltage Regulator With Fast Transient Response

32-bit Microcontrollers - MCU Automotive C2000 32-bit MCU with 100 MHz, FPU, TMU, 128-KB flash 80-LQFP -40 to 125

The 74LVC1G132DCKR is a single 2-input NAND Schmitt trigger logic gate from Texas Instruments, operating on a 1.65 V to 5.5 V supply. It features hysteresis for noise immunity and is housed in a compact 5-pin SC-70 package. Ideal for signal conditioning and edge detection in portable and battery-powered systems.

V-Ref Precision 3.3V 10mA Automotive 5-Pin SOT-23 T/R

TLV320AIC3106IRGZ is a low-power stereo audio CODEC with integrated ADC, DAC, and headphone amplifier for portable audio and telephony applications. It operates from a 1.8 V digital supply with a separate 3.3 V analog supply and supports sample rates from 8 kHz to 96 kHz in a 48-pin QFN package. Available from stock worldwide with competitive pricing.

Operational Amplifiers - Op Amps AEC-Q100, 1-channel, 10-MHz, low-noise, RRIO, CMOS operational amplifier with shutdown capability 6-SOT-23 -40 to 125

LDO Voltage Regulators Automotive 1-A, low-IQ, high-PSRR, low-dropout (LDO) voltage regulator with power good 8-SON -40 to 125

Buck Switching Regulator IC Positive Adjustable 1V 1 Output 10A 16-PowerVFQFN

Use the download button to access the SN74AUP3G04DQER schematic symbol, PCB footprint, and 3D model.

Current Sense Amplifiers Automotive AEC-Q100, -4-V to 110-V, 1.3-MHz current sense amplifier 5-SOT-23 -40 to 125

Current Sense Amplifiers Automotive AEC-Q100, -4-V to 110-V, 1.3-MHz current sense amplifier 5-SOT-23 -40 to 125

The ADS1299CPAGR is a low-noise 8-channel 24-bit delta-sigma analog front-end IC optimized for biopotential measurements including EEG, ECG, and EMG. It integrates programmable gain amplifiers, an internal reference, and an SPI interface in a 64-pin TQFP package. Available from Texas Instruments in tape-and-reel packaging with worldwide shipping.

Analog to Digital Converters - ADC Automotive, 24-bit, 32-kSPS, 4-channel simultaneous-sampling, delta-sigma ADC 20-TSSOP -40 to 125

Operational Amplifiers - Op Amps Automotive qualified, 4-channel 8-MHz, low-noise, low offset, RRIO general purpose CMOS op amp

INA281A4QDBVRQ1 is an AEC-Q100 automotive current sense amplifier by Texas Instruments supporting -4 V to 110 V common-mode voltage. Key specs: 1.3 MHz bandwidth, 120 dB minimum CMRR, -40°C to +125°C operation in a 5-pin SOT-23 package. Available in stock with worldwide shipping.

Supervisory Circuits Low-power voltage supervisor (reset IC) with active-low, push-pull output 3-SOT-23 -40 to 125

Use the download button to access the INA281B2IDBVR schematic symbol, PCB footprint, and 3D model.

Clock Buffer 500-MHz, 25-bit configurable registered buffer with SSTL_18 inputs and outputs 96-NFBGA 0 to 70