Integrated Circuit

TPS78512QKVURQ1 is an automotive-grade 1 A fixed 1.2 V LDO linear regulator with high accuracy from Texas Instruments. It features a low dropout voltage of 315 mV typical at full load and operates from 1.7 V to 6 V input. Available with AEC-Q100 qualification for demanding automotive applications.

Encoders, Decoders, Multiplexers & Demultiplexers Hi-Spd CMOS 4-16 Ln Decoder/Demltplxr

The CD4069UBMTG4 is a CMOS hex inverter from Texas Instruments containing 6 independent unbuffered NOT gates operating across a wide 3V to 15V supply range with 50 pF load drive capability. It belongs to the 4000-series CMOS family and is available in a 14-pin SOIC package. Suitable for logic level conversion, oscillator circuits, signal conditioning, and general-purpose digital logic design.

Precision Amplifiers High-speed (40-MHz), high-precision (25-uV) , low-noise op amp with integrated gain switches

Texas Instruments CD74HC4515EG4 is a high-speed CMOS 4-to-16 line decoder/demultiplexer with active-low outputs, operating from 2 V to 6 V supply. It features an enable input and is housed in a 24-pin DIP package suitable for logic decoding applications.

The CD74HCT75EE4 is a dual D-latch high-speed CMOS logic IC from Texas Instruments in the HCT family, featuring complementary outputs and 50pF load capacitance rating in a 16-pin DIP package. It provides 4mA output sink current and full TTL-compatible input thresholds for interfacing with 5V logic systems. Available from stock worldwide in a through-hole DIP package.

MPU AM335x RISC 32bit 600MHz 1.8V/3.3V Automotive 298-Pin NFBGA

Buffers & Line Drivers Dual FET Bus Switch

OR Gate 1-Element 2-IN CMOS 6-Pin X2SON T/R

SN74LS147DR is a 10-line to 4-line BCD priority encoder from Texas Instruments' 74LS logic family, encoding nine active-low inputs into a 4-bit BCD code with inverted outputs. It handles priority resolution in hardware so the highest-order active input determines the encoded output without software intervention. Packaged in a 16-pin SOIC, it suits keypad encoding, interrupt prioritization, and numeric input interfaces in 5 V TTL systems.

The TL5001AQDG4 is an AEC-Q100-qualified voltage-mode PWM DC-DC controller supporting step-down and step-up topologies from 3.6 V to 40 V input at 500 kHz switching frequency, delivering up to 20 mA gate drive in an 8-pin SOIC tape-and-reel package.

2 Audio power amplifier,LM4880N 200mW

Logic Gates Triple 3 Input Pos NAND Gate

The AM5706BCBDDS is a Texas Instruments Sitara AM570x high-performance application processor featuring ARM Cortex-A15 cores with integrated DSP and accelerators for industrial applications. It operates at 1.11V to 1.2V core supply in a compact 538-ball FCBGA package. Available from authorized distributors with worldwide shipping.

Op Amp Quad Low Offset Voltage Amplifier R-R O/P ±18V/36V 14-Pin SOIC T/R

Texas Instruments TL5001AQDRG4 is a PWM switching controller in an 8-pin SOIC package, operating from 3.6 V to 40 V input. It supports voltage-mode control at up to 500 kHz switching frequency with 20 mA output drive.

Texas Instruments TMS320VC5509AGBB is a 16-bit fixed-point digital signal processor with 20 MHz clock, 21-bit address bus, and 16-bit external data bus in a 179-pin NFBGA package. Operates from -40°C to 85°C with boundary scan for production testing. Available from stock with worldwide shipping.

negative voltage regulators

Use the download button to access the ADS1015IRUGT schematic symbol, PCB footprint, and 3D model.

LM4766TF/NOPB is a dual-channel Class-AB audio power amplifier from Texas Instruments delivering 40 W per channel into 8 ohm loads. It operates across a 20 kHz audio bandwidth with 2 independent channels in a 15-pin TO-220 ZIP package. Designed for stereo hi-fi amplifiers and home theater systems requiring high output power with low distortion.

Analog to Digital Converters - ADC Dual 500kHz 2+2 Ch Simltns Smplng ADC

Operational Amplifiers - Op Amps Single-Supply MicroPower Oper Amp

DIP-20

66AK2G12ABY60 is a dual-core ARM Cortex-A15 and DSP SoC by Texas Instruments for high-performance embedded processing. Key specs: 600MHz clock, 625-ball BGA package, 0.945V core supply. From $45.00, in stock with worldwide shipping.

Use the download button to access the DRV5032DULPGM schematic symbol, PCB footprint, and 3D model.

TMS320VC5509AGBBR is a 16-bit fixed-point DSP from Texas Instruments with a 200 MHz clock, 21-bit address bus, and boundary-scan JTAG, housed in a 179-ball BGA package for -40 to 85 degree C operation. Designed for low-power audio and telecom signal processing. From $12.00 in stock worldwide shipping.

Texas Instruments TMAG5170A1QDGKR is an automotive-grade 3D linear Hall-effect position sensor with a 4-wire SPI interface, 2mA output current capability, and a 3mm x 3mm x 1.1mm surface-mount package. It provides high-resolution magnetic field sensing across X, Y, and Z axes for precise position and angle measurement. Available from stock worldwide with fast shipping.

Use the download button to access the BQ29737DSER schematic symbol, PCB footprint, and 3D model.

Texas Instruments ISOW1412DFM is an isolated RS-485/RS-422 transceiver integrating a low-emissions, low-noise, high-efficiency DC-DC converter in a single 20-pin SOIC package. It provides 5 kV reinforced isolation with up to 500 kbps data rate and supports EIA-485 and EIA-422 standards for industrial communication networks.

Board Mount Temperature Sensors Analog Temp Sensor

SENSOR HALL ANALOG SOT23-3

Texas Instruments ISO7821LLDWR is a 2-channel, 100 Mbps digital isolator in a 16-pin wide-body SOIC package with reinforced isolation up to 5 kV peak. It provides bidirectional signal isolation for SPI, UART, and GPIO interfaces in industrial and medical applications. Available from authorized distributors with worldwide shipping.

RS-422/RS-485 Interface IC Low-Power RS-485/RS-422 Multipoint Transceiver 8-SOIC -40 to 85

The Texas Instruments TMS320F28384DZWTS is a dual-core C28x real-time microcontroller with a Connectivity Manager, running at 200 MHz with 1 MB Flash and integrated CLA, ePWM, and ADC in a BGA package. It is designed for high-performance motor control, digital power conversion, and industrial automation requiring real-time deterministic processing. Available from $25.00 in stock with worldwide shipping.

Precision Amplifiers Ultra-high precision (2 uV), zero-drift (0.003 uV/C), low-input-bias-current op amp (single)

The TLV840NADH29DBVR is a voltage supervisor and reset IC from Texas Instruments, featuring a single-channel adjustable threshold with programmable reset delay in a compact SOT-23-5 package. It monitors supply voltage integrity and generates a reset signal to protect microcontrollers and digital systems from undervoltage conditions. Available in tape-and-reel format, in stock with worldwide shipping.

TPS548B28RWWR is a 20A synchronous step-down PWM switching voltage regulator by Texas Instruments in a compact 21-pin QFN package. Key specs: 2.7V to 16V input voltage range, PWM control, Pb-free construction. From $4.00, in stock with worldwide shipping.

Precision Amplifiers Ultra-high precision (2 uV), zero-drift (0.003 uV/C), low-input-bias-current op amp (single)

Analog to Digital Converters - ADC Dual 500kHz 2+2 Ch Simltns Smplng ADC

The TXU0304-Q1 is an automotive-qualified 4-bit unidirectional voltage level translator by Texas Instruments. Key specs: 4 channels, 1.2 V to 3.6 V on A-side, 1.65 V to 5.5 V on B-side, AEC-Q100 qualified. From stock with worldwide shipping.

RF Transceiver 76-GHz to 81-GHz automotive second-generation high-performance MMIC 161-FC/CSP -40 to 140

TLV840MADL52DBVR is a low-voltage supervisor IC with adjustable reset time delay and manual reset by Texas Instruments in a 5-pin SOT-23 package. Key specs: single-channel, adjustable threshold, programmable reset delay, Pb-free. From $0.60, in stock with worldwide shipping.

GALILEO FLIPCHIP

TLV840MADL08DBVR is a single-channel low-voltage supervisor and reset IC with an adjustable reset time delay and manual reset input, housed in a 5-pin SOT-23 package. It monitors supply voltages with programmable threshold detection and generates a reliable reset pulse with user-selectable delay from milliseconds to seconds. Available from stock worldwide with fast international shipping.

The TPS61200DRCT is a synchronous boost converter from Texas Instruments that operates from an ultra-low 0.3 V input up to 5.5 V, featuring 1.3 A integrated switches and adjustable output voltage from 1.8 V to 5.5 V in a 10-pin SON package. It is optimized for single-cell battery and energy-harvesting power supplies. Available from stock worldwide with competitive pricing and fast shipping.

Texas Instruments ADS1278SHKP is a dc-dc converter for electronic assemblies. It is specified around 84 pins for matching footprints and electrical requirements. From inquiry pricing with worldwide shipping support.

Texas Instruments CD4046BF is a CMOS phase-locked loop (PLL) IC operating from 3 V to 18 V with an on-chip VCO, phase comparators, and source follower in a 16-pin ceramic DIP package. It supports frequencies from DC to several MHz and is suited for frequency synthesis and demodulation. Available in stock worldwide with fast shipping from authorized distributors.

SM72480SD-120/NOPB is a factory-preset temperature switch and sensor from Texas Instruments, operating from 1.6V supply with ±2.3°C accuracy over a -50°C to 150°C range. Features short circuit protection and ultra-low 16µA maximum operating current in a miniature 6-pin WSON package. Available lead-free from authorized distributors with worldwide shipping.

Gate Drivers Automotive 40-V, 4-channel half-bridge smart gate driver with inline current sense amplifier

Use the download button to access the TLV76701DGNR schematic symbol, PCB footprint, and 3D model.