Integrated Circuit

The LM7805CK is a fixed 5 V series linear voltage regulator from Texas Instruments accepting 7.5 V to 20 V input with a maximum absolute rating of 35 V. It features 0.05% line and load regulation and 2 V nominal dropout voltage in a 2-pin metal can (TO-39) package. Available in stock with worldwide shipping.

TMUX1309QBQBRQ1 is an automotive-grade dual 4:1 differential analog multiplexer with 500MHz bandwidth in a 16-pin QFN package. AEC-Q100 qualified with 2 independent channels and wide signal bandwidth for high-speed signal routing. From $2.50 in stock with worldwide shipping.

Inverter IC 6 Channel 14-VQFN (3.5x3.5) 1.65V ~ 3.6V 10 µA 24mA, 24mA -40°C ~ 85°C Surface Mount

Texas Instruments TLV76725DGNR is a 1A fixed-output LDO linear regulator with 2.5V input range up to 16V and 2.5V output. Features 900mV typical dropout voltage and -40°C to 125°C operation in compact 8-pin HVSSOP package. Available from stock worldwide with competitive pricing and fast worldwide shipping.

Use the download button to access the DRV5055A4QLPGM schematic symbol, PCB footprint, and 3D model.

TPS628100MQWRWYRQ1 is an automotive-grade 4A step-down DC-DC converter with 2.75V to 6V input range and PWM/PFM control modes. Features a compact 2mm x 3mm wettable-flanks QFN package for high-density board designs. AEC-Q100 qualified for reliable automotive use, available with worldwide shipping.

Operational Amplifiers - Op Amps Automotive, single, 40-V 4.5-MHz low-power operational amplifier 5-SOT-23 -40 to 125

Use the download button to access the LP38502TS-ADJ/NOPB schematic symbol, PCB footprint, and 3D model.

The TLV3601DCKR is a single high-speed analog comparator from Texas Instruments with push-pull output, 5 µA maximum bias current, and 5 mV maximum input offset voltage. It delivers fast propagation delay suitable for threshold detection and zero-crossing detection in a tiny 5-pin SOT-23 package. Available from stock worldwide with competitive pricing.

Use the download button to access the INA2191A4IYBJR schematic symbol, PCB footprint, and 3D model.

Use the download button to access the SN74HCS240RKSR schematic symbol, PCB footprint, and 3D model.

Battery Management Standalone 1-cell 800-mA linear battery charger in a WCSP package

LM4041BIZ-1.2/NOPB is a precision shunt voltage reference from Texas Instruments with a 1.225 V nominal output and tight ±0.5% initial accuracy. It operates as a two-terminal device sinking up to 12 mA and is specified over the industrial -40°C to +85°C temperature range. Supplied in a through-hole TO-92 package for easy prototyping and low-cost production boards.

The TLV75515PDQNR is a 500mA high-PSRR, low-quiescent-current, low-dropout linear voltage regulator from Texas Instruments with an enable pin, fixed 1.5V output, and an input voltage range of 2V to 5.5V in a compact 4-pin X2SON package. It features a maximum dropout voltage of 425mV at full load, making it ideal for battery-powered and space-constrained applications. Available in stock from major distributors worldwide with fast shipping.

Texas Instruments TMP1075NDRLT is a 12-bit digital temperature sensor with maximum 1°C accuracy and ultra-low operating current of 0.004mA. Features I2C-compatible interface in a miniature 1.6x1.2mm surface-mount package. Available in stock worldwide with competitive pricing and fast shipping.

LDO Voltage Regulators 3-A, 7V, ultra-low-dropout voltage regulator with enable 5-DDPAK/TO-263 -40 to 125

Switching Voltage Regulators 5A Flyback Reg-1

V-Ref Precision 2.5V 10mA 3-Pin TO-92 T/R

Use the download button to access the ISOW7741DFMR schematic symbol, PCB footprint, and 3D model.

Texas Instruments TMS320LF2406PZA is a 16-bit fixed-point DSP microcontroller with 64KB Flash in a 100-pin LQFP package. Features 20MHz max clock, 16-bit address and data buses, barrel shifter, and boundary scan support. Available from stock with worldwide shipping.

The TLVH431AILPR is a two-terminal adjustable shunt voltage reference from Texas Instruments with an output voltage range of 1.228V to 1.252V and maximum output current of 80mA. It is RoHS compliant and housed in a tiny SOT-23 3-pin package for space-constrained designs. Available from authorized distributors worldwide with fast shipping.

Gate Drivers 600-V 70m GaN with integrated driver and protection 32-VQFN -40 to 125

Buffers & Line Drivers SNGL Bus Buffer Gate

Use the download button to access the LM62460Q3RPHRQ1 schematic symbol, PCB footprint, and 3D model.

Switching Voltage Regulators 3-A, 85-V, 2.2-MHz wide VIN boost, flyback, & SEPIC converter with dual random spread spectrum

Motor / Motion / Ignition Controllers & Drivers 35-V, 1-A, quad independent half bridge driver with current sense 28-HTSSOP -40 to 125

The TLV320ADC6120IRTER is a high-performance stereo audio analog-to-digital converter from Texas Instruments featuring 123-dB SNR and 768-kHz sampling rate with 32-bit resolution. It integrates two analog input channels with a delta-sigma conversion architecture in a compact 20-pin VQFN package. Available from authorized distributors worldwide with competitive pricing and in-stock inventory for immediate shipment.

Texas Instruments LM2940CS-15/NOPB, 1 Low Dropout Voltage, Voltage Regulator 1A, 15 V 3-Pin, D2PAK (TO-263)

Linear Voltage Regulators 100-mA, 30-V, linear voltage regulator 3-TO-92 0 to 125

Use the download button to access the LM5158RTER schematic symbol, PCB footprint, and 3D model.

X2SON-5

Voltage References Fixed & adjustable, precision micropower shunt voltage reference 3-SOT-23 -40 to 85

i want the footprint and the symbol for the mentioned part as it is not available for there to use

UCC27614DSGR is a single-channel IGBT/MOSFET gate driver IC from Texas Instruments with open-drain output, supporting standard input logic and operating from a 4 V to 18 V supply. Available in an 8-pin WSON package with JESD-609 e4 halogen-free rating. From $0.80 in stock worldwide shipping.

Automotive-grade Hall effect switch sensor with in-plane sensing capability, 2 mT hysteresis, omnipolar input mode, and reverse polarity protection. Designed for AEC-Q100-qualified applications in compact SOT-23 package. Suitable for speed sensing, position detection, and current limit applications in automotive systems.

Use the download button to access the LM5150QRUMTQ1 schematic symbol, PCB footprint, and 3D model.

Texas Instruments TMCS1107A2BQDRQ1 is an AEC-Q100 qualified isolated Hall-effect current sensor supporting ±420 V isolation, analog voltage output, and an operating range of -40°C to 125°C in an 8-SOIC surface-mount package. Suited for automotive and industrial current measurement.

The Texas Instruments XIO2001IZWSR is a PCIe to PCI bus translation bridge IC supporting 32-bit PCI at up to 250 MBps and 125 MHz clock. It operates from -40°C to 85°C in a compact 169-NFBGA package. In stock worldwide with competitive pricing and fast global shipping.

Use the download button to access the AMC1350DWVR schematic symbol, PCB footprint, and 3D model.

The Texas Instruments TMAG5170A1QDGKT is an automotive-grade 3D Hall-effect magnetic sensor with a 4-wire SPI interface and ±2 mA output range. It features a compact 3×3×1.1 mm surface-mount plastic package with high-accuracy magnetic field sensing. Available from stock with worldwide shipping.

Texas Instruments TPS75533KCG3 is a fixed 3.3V low-dropout linear regulator with 1A output current and 0.5V maximum dropout voltage. It operates from 3.9V to 5.5V input and features fast transient response. Available in TO-263 package with worldwide shipping.

Texas Instruments LM22676TJ-5.0/NOPB is a voltage-mode PWM step-down switching regulator with a fixed 5 V output, 4.5 V to 42 V input range, in a compact 7-pin PSSO package. From $1.80 in stock worldwide shipping.

The Texas Instruments DM74LS283M is a classic 4-bit binary full adder with fast carry propagation in the 74LS TTL logic family in a 16-pin SOIC package. It performs parallel binary addition on two 4-bit operands with carry-in and carry-out. Available from stock with worldwide shipping.

Use the download button to access the LM78L05ACZ/LFT7 schematic symbol, PCB footprint, and 3D model.

The XIO2001IZWS is a PCIe to PCI bus translation bridge IC by Texas Instruments. Key specs: 32-bit address and data bus, 125 MHz max clock, 250 MBps data transfer rate, operating from -40 to 85°C. Available in 169-NFBGA package with worldwide shipping.

TPS73501DRBR is an adjustable single-output LDO voltage regulator with 500mA current capability and ultra-low 0.28V nominal dropout voltage. Operates from 2.7V to 6.5V input with excellent 0.02%/V line regulation and low noise output. From $1.00 in stock with worldwide shipping.

Texas Instruments TMS320DM642AZDK6 is a 32-bit fixed-point digital media processor optimized for video and imaging applications. Features 75.19 MHz max clock, 64-bit external data bus, 23-bit address bus, integrated cache, and JTAG boundary scan in a BGA package. Available from stock with worldwide shipping.

Battery Management Li-Ion/Li Polymer Ad vanced Single-Cell B BQ29728DSET

The TPA2005D1DRBR is a Texas Instruments single-channel Class-D audio amplifier delivering 1.45W output power with 20kHz bandwidth and 97dB SNR in a compact 8-pin VSON package. It integrates a highly efficient switching output stage minimizing heat dissipation in battery-powered portable speaker applications. Available from authorized distributors with worldwide shipping.

The TMS320F28335ZAYAR is a 32-bit C28x floating-point DSP from Texas Instruments running at up to 150 MHz with integrated ADC and JTAG boundary scan in a BGA package. It is designed for advanced real-time control in power electronics and motor drive systems. Available from stock worldwide with competitive pricing and fast shipping.