Integrated Circuit
Integrated Circuit components are essential building blocks in modern electronic systems. FindMyChip sources Integrated Circuit ICs from authorized China distributors with competitive pricing and reliable stock.
77,666 components
How to Choose Integrated Circuit Components
- 1Verify electrical specifications (voltage, current, frequency) match your design requirements.
- 2Check package footprint and thermal characteristics against your PCB layout constraints.
- 3Confirm lifecycle status and long-term availability for production designs.
Popular Applications
Consumer Electronics
Smartphones, tablets, and smart home devices
Industrial Systems
Factory automation, control systems, and monitoring
Automotive
In-vehicle electronics and advanced driver assistance
Telecommunications
Base stations, routers, and network equipment
Integrated Circuit Guides & Articles
STM32H725IGT3 High-Performance MCU Design Guide
Design STM32H725IGT3 systems for reliable 550 MHz operation with practical power, clock, cache, DMA, PCB, ADC, and recovery guidance.
Jul 31, 2026
150141VS73100 Violet SMD LED Selection Guide: Color, Drive, and Sourcing
Select the 150141VS73100 by wavelength, brightness, drive current, 3528 fit, reliability, and traceable sourcing requirements.
Jul 31, 2026
STEF05SGR 5 V eFuse Protection Design Guide
Design a reliable 5 V STEF05SGR eFuse stage with current-limit math, capacitor sizing, thermal analysis, fault recovery, and PCB layout guidance.
Jul 30, 2026
S1J-E3/61T Rectifier Thermal Design, Surge, and Derating Guide
Practical S1J-E3/61T design guidance for thermal limits, inrush surge, PCB layout, voltage margin, and current derating.
Jul 30, 2026
All Integrated Circuit Components
Showing 40,601–40,650 of 77,666
The Texas Instruments TPS7A2045PDBVR is an ultra-low-noise 300 mA fixed LDO regulator with high PSRR and a maximum dropout voltage of only 145 mV. It features low quiescent current, 0.019% maximum load regulation, and a 4.5V output in a SOT-23-5 package. Available from stock with worldwide shipping.
LDO Voltage Regulators 3-A, ultra-low-dropout voltage regulator with enable 5-DDPAK/TO-263 -40 to 125
Texas Instruments TPS79633KTTR is a fixed-output low-dropout linear regulator with 0.22V nominal dropout voltage and 4.3V to 5.5V input voltage range in a 5-pin TO-263 package. It delivers a regulated 3.3V output with high PSRR and low noise performance suitable for sensitive analog and RF circuits. Available in stock from Texas Instruments with worldwide shipping.
-12-V, P channel NexFET™ power MOSFET, single LGA 0.6 mm x 0.7 mm, 116 mOhm, gate ESD protection
Buffers & Line Drivers Dual FET Bus Switch
16-bit Microcontrollers - MCU Ultra low power MCU
SN54HCT373FK is an octal transparent D-type latch from Texas Instruments in the HCT logic family, providing 8 individually latched outputs with 3-state capability and an active-low output enable. The device supports a 150 pF load capacitance and 6 mA output sink current, making it suitable for bus-hold and data-register functions. Packaged in a 20-pin ceramic LCC, it serves high-reliability military and aerospace data bus buffering applications.
Operational Amplifiers - Op Amps Hi-Vltg Hi-Current Op Amp
The LM22673TJE-5.0/NOPB is a fixed 5V output buck switching regulator from Texas Instruments capable of delivering 3A output current with an input voltage range of 4.5V to 42V. It uses voltage-mode PWM control and is housed in a 7-lead TO-263 Thin package for excellent thermal management. RoHS compliant and available from distributors worldwide with fast shipping.
Use the download button to access the DRV591VFP schematic symbol, PCB footprint, and 3D model.
Use the download button to access the LM2673SX-12/NOPB schematic symbol and PCB footprint.
Instrumentation Amplifiers Dual Low Power G = 10 100
The Texas Instruments XIO2001ZWS is a PCI-to-PCI Express bridge supporting 32-bit PCI at 125MHz with up to 250MBps data transfer rate in a 169-ball BGA package. It enables legacy PCI device integration into PCIe-based systems. Available from stock with worldwide shipping.
The TPS61010DGSRG4 is a Texas Instruments low-input-voltage synchronous boost converter operating from 0.8V to 3.3V input using current-mode PWM control. It provides adjustable output from 1.5V to 3.3V, enabling efficient power conversion for single-cell battery applications in a 10-pin MSOP package. Available with worldwide shipping.
Advanced Floppy Disk Controller
LDO Voltage Regulators 5-A, 13-V, linear voltage regulator 3-DDPAK/TO-263 0 to 125
Texas Instruments LM4050QCEM3X5.0/NOPB is a precision micropower shunt voltage reference with a 5.0 V nominal output (4.95 V–5.05 V), two-terminal operation, AEC-Q100 qualification, and a 3-pin SOT-23 package.
Translation - Voltage Levels 4B Dual-Supply Bus Xcvr
The UA78L05ACPKE6 is a Texas Instruments fixed 5V, 100mA linear voltage regulator with 30V maximum input voltage and 1.7V dropout, housed in a SOT-89 package for industrial temperature range 0 to 125°C. It features excellent line regulation of 0.15% and load regulation of 0.06% for precise voltage references. Available from authorized distributors with worldwide shipping.
Use the download button to access the OPA2992IDR schematic symbol, PCB footprint, and 3D model.
The TPS2066DGNR-1 is a single-channel load switch IC from Texas Instruments operating from 2.7 V to 5.5 V input. It features an adjustable current limit and over-temperature protection in an 8-pin SOIC package. Available worldwide with fast shipping and competitive pricing.
TMCS1107A1BQDRQ1 is an AEC-Q100 Grade 1 automotive isolated Hall-effect current sensor supporting up to ±420 V isolation with analog voltage output and internal reference in an 8-pin SOIC package. It operates from -40°C to 125°C for reliable current measurement in harsh automotive and industrial environments. In stock worldwide with competitive pricing and fast shipping.
The TPS7B8850QKVURQ1R2 is an automotive-grade 500mA, 40V low-dropout linear regulator with fast transient response and fixed output voltage in a TO-252 package. Supports input voltages from 6V to 40V with a typical dropout voltage of 0.39V. Available from stock worldwide with AEC-Q100 qualification for automotive applications.
Translation Transceiver 1 Element 8 Bit per Element 3-State Output 24-VQFN (5.5x3.5)
Texas Instruments TPS54622RHLT is a 6 A current-mode synchronous buck converter operating from 4.5 V to 17 V input in a 14-pin VQFN package, optimized for point-of-load regulation in industrial and communications equipment. Integrated high-side and low-side MOSFETs reduce external component count. Available in stock globally with worldwide shipping.
OPA4344PA Texas Instruments, Precision, Op Amp, RRIO, 1MHz 10 kHz, 2.5 → 5.5 V, 14-Pin PDIP
IC OFFLINE SW MULT TOP 8VSSOP
PDIP. N. 14. TBD. Call TI. Call TI. SN74121NSR. ACTIVE. SO. NS. 14. 2000. Pb-Free. (RoHS). CU NIPDAU. Level-2-260C-1 YEAR/
Current Sense Amplifiers 40-V, bidirectional, high-precision current sense amplifier with picoamp input bias & ENABLE
Use the download button to access the LM337LZ/NOPB schematic symbol, PCB footprint, and 3D model.
General Purpose Amplifier 2 Circuit - 8-SOIC
Texas Instruments 5962-8995701VA is a military-grade 3-phase brushless DC motor controller IC in an 18-pin ceramic DIP package, rated from -55°C to 125°C. It operates as a switched-mode controller requiring an auxiliary -2.5V to -20V supply, with up to 0.5A output current per phase. Available from specialty distributors for MIL-SPEC applications worldwide.
Texas Instruments TLV342SIRUGR is a dual rail-to-rail input/output operational amplifier with a 90 dB typical CMRR, 4 mV maximum offset voltage, and 3 pA ultra-low bias current in a compact WSON package. Optimized for single-supply and low-power portable signal-conditioning circuits. Available in stock worldwide with immediate shipping.
Texas Instruments LM27402SQ is a high-performance synchronous buck controller using voltage-mode PWM control with DCR current sensing, operating from 3V to 20V input and targeting 4.5V typical output. Features lossless inductor DCR current sensing, fast transient response, and fits a compact 16-pin QFN package for space-constrained power designs. Ideal for point-of-load regulation in telecom, server, and industrial power systems.
The LT1013CDRE4 is a dual low-offset operational amplifier from Texas Instruments, featuring a 400 µV max offset voltage, 97 dB CMRR, and ±15 V supply in an 8-pin SOIC package. Available in stock with worldwide shipping.
Use the download button to access the TPS8268180SIPT schematic symbol, PCB footprint, and 3D model.
DC-DC Converters Step-Down Adjustable 1 2V 6V 0.6V 6V 600mA QFN-6_2x2x065P RoHS
Buffers & Line Drivers 10-Bit Buffer/Driver With 3-State Output
Precision Amplifiers Low noise (0.2- uVPP, 9-nV/ Hz), heavy capacitive drive (25-nF), super beta, precision op amp 8-VSSOP -40 to 105
Bus Transceivers Single-bit dual-supply bus transceiver 6-SON -40 to 125
Texas Instruments LM2936Z-5.0/NOPB, 1 Low Dropout Voltage, Voltage Regulator 50mA 3-Pin, TO-92
Hot Swap Controller 13.8V Positive Voltage 10-Pin VSON EP T/R
Texas Instruments UCC256403ADDBR is an LLC resonant controller with ultra-low-power and ultra-quiet standby, operating from 11.25 V to 30 V supply in a 14-pin SOIC package. It uses current-mode resonant control and covers -40°C to 125°C for demanding industrial and server PSU applications. Available from stock worldwide with competitive pricing.
TEXAS INSTRUMENTS - AM3352BZCZ30 - MPU, 32BIT, 300MHZ, 0 TO 90DEG C
Precision Amplifiers High-speed (40-MHz), high-precision (25-uV) , low-noise op amp with integrated gain switches
TPS40195RGYT is a voltage-mode PWM synchronous buck controller from Texas Instruments supporting 4.5 V to 20 V input and adjustable output from 1 V to 5 V in a 16-pin QFN package. It drives external MOSFETs for high-efficiency DC-DC conversion in telecom, industrial, and computing point-of-load designs. Available from stock with worldwide shipping.
The TMS320F28374SZWTS is an automotive-grade 32-bit C28x floating-point DSP microcontroller from Texas Instruments running at up to 100 MHz with 512 KB of flash memory. It features integrated ADC, DAC, and DMA channels on a 1.2 V/3.3 V dual-supply in a 337-pin NFBGA package. Available worldwide with competitive pricing.
TPS75815KC is a fixed 1.5 V fast-transient LDO linear regulator with 150 mV typical dropout voltage and 5.5 V maximum input. High output current capability with 300 mV maximum dropout suits DSP and FPGA core voltage rails. Available in TO-263-5 KC package with worldwide shipping.
TLC7524IDG4 is a single-channel 8-bit multiplying DAC with parallel input interface, ±10V analog output range, and 0.1953% max linearity error. It accepts binary or offset binary code formats for flexible bipolar signal generation in analog control and waveform synthesis circuits. Available in a 16-pin SOIC package for standard surface-mount assembly.
Use the download button to access the DAC7564ICPWRG4 schematic symbol, PCB footprint, and 3D model.
Need Integrated Circuit Components?
Get competitive quotes from authorized China distributors
Request a Quote