Integrated Circuit

Digital to Analog Converters - DAC 16-bit SPI nanoDAC+ with on-chip 1.25V/2

Analog Devices LTC3892EUH#PBF is a low-quiescent-current dual buck switching controller operating from 4.5V to 60V input with adjustable 0.8V to 59.4V output and integrated 10V gate drive. It uses current-mode phase-shift control and includes a 5V output rail. Available from distributors with worldwide shipping.

The LTC4412HS6#TRMPBF is an Analog Devices automatic PowerPath controller in a 6-pin ThinSOT package, providing seamless switchover between two power sources using external P-channel MOSFETs. Designed for portable and battery-backup systems requiring uninterrupted power delivery.

Switching Voltage Regulators 55V, 1.2A, 2MHz Step-Down Regulator with 2.8uA Quiescent Current

Analog Devices LTC6363HMS8#TRPBF is an automotive-grade single differential amplifier with rail-to-rail output, 35 MHz bandwidth, 120 dB CMRR, and ±5.5 V supply, packaged in an 8-pin MSOP for precision ADC driving and signal conditioning.

Single rail-to-rail output operational amplifier with 35 MHz bandwidth and 120 dB typical CMRR, housed in an 8-pin MSOP package for automotive and industrial use. Operates from ±5.5V or a single 11V supply with 0.1µA maximum bias current. Suitable for precision signal conditioning and filter designs requiring wide common-mode range.

Op Amp Dual GP R-R I/O ±6.3V/12.6V Automotive 8-Pin MSOP T/R

Op Amp Dual GP R-R I/O ±6.3V/12.6V Automotive 8-Pin MSOP Tube

The LTM2882CY-3#PBF is a complete isolated RS-232 µModule transceiver with integrated DC-DC power isolation from Analog Devices, supporting 2 drivers and 2 receivers in a 32-ball BGA. It provides up to 2.5 kV RMS isolation without external transformers or charge pumps. Designed for industrial serial communication, medical instruments, and factory automation requiring galvanic isolation.

Data Acquisition ADCs/DACs - Specialized Polyphase Multifunction Energy Meter IC

SPI Interface, 4 Ω RON, ±15 V/+12 V/±5 V,1.8 V Logic Control, 8:1 Muxes

Analog Devices LT3512IMS#PBF is a monolithic high-voltage isolated flyback converter accepting 6V to 100V input with current-mode PWM control in a compact MSOP-12 package. It integrates an N-channel power switch and all control circuitry, simplifying isolated power supply design for industrial and automotive applications.

LTM2882IY-5#PBF is a complete isolated RS-232 transceiver uModule from Analog Devices integrating isolation, DC-DC converter, and dual RS-232 drivers/receivers in a single 32-ball BGA package. It provides galvanic isolation for EIA/TIA-232-F serial links, simplifying isolated UART designs in industrial and medical equipment.

Linear Voltage Regulators 150mA Low Quiescent Crnt CMOS

Clock Drivers & Distribution 1:4 Distribution IC Dividers Delay Adj

The LT8300IS5#TRPBF is a micropower isolated flyback converter from Analog Devices with a 100 V input range, 150 V/260 mA integrated switch, and low quiescent current for compact isolated power designs. Available in SOT-23-5 package with tape-and-reel packaging for automated assembly.

The LTC7106EDDB#TRMPBF is a 7-bit current DAC designed for digital power management via PMBus, enabling programmable voltage and current control in DC/DC converters. It accepts a 2's complement serial input format with up to 1.25% linearity error. Housed in a compact 10-lead DFN package, it suits cloud computing and telecom power supply designs.

Linear Voltage Regulators 150mA Low Quiescent Crnt CMOS

The Analog Devices LTC7106IDDB#TRMPBF is a 7-bit current DAC designed to digitally adjust the output voltage of DC-DC power controllers via a PMBus-compatible serial interface. It delivers programmable current output with 2's complement input format and a maximum linearity error of 1.25%, housed in a compact 10-pin DFN package. Suitable for server power modules, telecom power supplies, and FPGA/ASIC core voltage margining applications with digital power management.

Analog Devices LT3021EDH#PBF, LDO Regulator, 500mA Adjustable, 0.2 → 9.5 V 16-Pin, DFN

LTM8023EY#PBF is a 2 A, 36 V input DC-DC µModule switching regulator from Analog Devices integrating inductor, controller, and passives in a compact BGA module. It accepts inputs from 3.6 V to 36 V and delivers adjustable output voltage from 0.8 V to 10 V using current-mode PWM control. Ideal for industrial, telecom, and distributed power systems requiring high integration and minimal external components.

LT3650EDD-8.4#PBF is a high-voltage monolithic linear Li-Ion battery charger delivering up to 2 A charge current with a fixed 8.4 V float voltage for 2-series-cell packs, housed in a 12-lead DFN package. It accepts a wide input voltage range and provides adjustable charge termination for flexible battery management. Ideal for industrial handheld devices, medical instruments, and portable power systems requiring a robust, single-chip 2-cell Li-Ion charging solution.

The LT3008MPTS8-3.3#TRMPBF is a 3.3V fixed-output LDO linear regulator with ultralow 3µA quiescent current and 20mA output capability, featuring 0.5V maximum dropout voltage. Available in compact TSOT-23-8 package from Analog Devices, in stock with worldwide shipping.

LTC4162EUFD-FADM#PBF is a multi-cell LiFePO4 step-down battery charger from Analog Devices in a 28-pin QFN package, supporting up to 35 V input, 3.2 A charge current, PowerPath management, and I2C telemetry. Ideal for industrial, medical, and portable power systems requiring intelligent battery management.

Op Amp Dual GP R-R O/P ±5.5V/11V Automotive 8-Pin MSOP Tube

Analog to Digital Converters - ADC ADC with Precision Resistor Network

Analog Devices LTC4162IUFD-FSTM#PBF is a multi-cell LiFePO4 step-down battery charger IC supporting up to 35 V input and 3.2 A charge current. It integrates an adjustable threshold and single-channel linear charging in a compact 28-pin QFN package. Available worldwide with fast shipping.

Switching Voltage Regulators Dual 4MHz, 3A Synchronous Step-Down DC/DC Converter

Switching Voltage Regulators Wide Vin Range Buck-Boost Charge Pump with Watchdog Timer

Analog Devices LTC3115EFE-2#TRPBF is an automotive-grade synchronous buck-boost DC-DC converter accepting 2.7 V to 40 V input and delivering a regulated 2.7 V to 40 V output at up to 0.8 A. Using voltage-mode PWM control, it operates seamlessly across step-down and step-up modes in a 20-pin TSSOP exposed-pad package for automotive and industrial power management.

Analog Devices LTC7000IMSE-1#PBF is a fast 150 V protected high-side N-channel MOSFET static switch driver in an MSOP-12 package. It provides robust gate drive for high-voltage load switching with integrated protection against reverse current, overcurrent, and overvoltage events. Ideal for hot-swap controllers, industrial power switches, and server backplane load management up to 150 V bus voltages.

Analog Devices AD8318 is a 1 MHz to 6 GHz logarithmic amplifier and RF power detector in a compact QFN package, offering 60 dB dynamic range and a temperature-compensated DC output proportional to input power. Available from stock worldwide with fast shipping.

The Analog Devices LT8606EMSE#TRPBF is a 42 V input, 350 mA synchronous step-down switching regulator featuring an ultra-low 2.5 µA quiescent current and current-mode PWM control. Housed in a 10-lead MSOP package, it delivers high efficiency at light loads, making it ideal for battery-powered and always-on industrial systems.

Analog Devices LT6001IMS8#TRPBF is a dual low-power rail-to-rail input/output op-amp with 18 V supply range and 96 dB typical CMRR in an MSOP-8 package, automotive-grade. Suited for precision signal conditioning in portable and automotive electronics.

Analog Devices LT6001IMS8#PBF is a dual low-power rail-to-rail input/output op amp rated to 18V supply with 82 dB minimum CMRR and 10 nA maximum bias current. It suits automotive and industrial signal conditioning in an 8-pin MSOP package. Designed for battery monitors, sensor amplifiers, and low-voltage portable systems requiring wide supply tolerance.

The LT8606EMSE#PBF is a 42V, 350mA synchronous step-down switching regulator with ultra-low 2.5µA quiescent current, ideal for always-on battery systems. It operates from 3V to 42V input and delivers regulated output with high efficiency across wide load ranges. Available worldwide with fast shipping.

IC REG INV ADJ 0.35A TSOT23-5

8-Channel, Low Noise, Low Power, 24-Bit, Sigma-Delta ADC with PGA and Reference

60VIN, 5A Silent Switcher µModule Regulator

Analog Devices LTC1044AIS8#PBF is a switched-capacitor voltage converter IC supporting 1.5V to 12V input with up to 13V output capability in an 8-pin SOIC package. It performs voltage inversion and doubling without inductors using only external capacitors. Ideal for generating negative rails and dual supplies in battery-powered analog and mixed-signal circuits.

LDO Regulator Pos 5V 0.05A Automotive 8-Pin MSOP EP Tube

Low Voltage Current Mode PWM Controller.

LDO Voltage Regulators 1A Low Dropout Linear regulators

Low noise: 11 µV rms independent of fixed output voltage ► PSRR of 88 dB at 10 kHz, 68 dB at 100 kHz, 50 dB at 1 MHz, VOUT ≤ 5 V, VIN = 7 V ► Input voltage range: 2.7 V to 20 V ► Maximum output current: 200 mA ► Initial accuracy: ±0.8% ► Accuracy over line, load, and temperature ► −1.2% to +1.5%, TJ = −40°C to +85°C ► ±1.8%, TJ = −40°C to +125°C ► Low dropout voltage: 200 mV (typical) at a 200 mA load, VOUT = 5 V ► User programmable soft start (LFCSP and SOIC only) ► Low quiescent current, IGND

Analog Devices HMC406MS8G is a GaAs single-stage RF power amplifier covering DC to 6 GHz with 13 dB gain and 20 dBm maximum input power from a 5.5 V supply. It is housed in an 8-pin MSOP with exposed pad for efficient thermal dissipation, targeting microwave radio, VSAT, and test instrumentation applications.

Analog Devices LT8610ACEMSE-1#PBF is a 42 V, 3.5 A synchronous step-down DC-DC regulator with an ultra-low 2.5 µA quiescent current in an MSOP-16 package. It uses current-mode PWM control operating from 3 V to 42 V input with a fixed 1 MHz switching frequency to minimize external component size. Ideal for automotive, industrial IoT, and battery-powered systems requiring high efficiency over a wide load range from 24 V or 12 V rails.

Dual 25A or Single 50A DC/DC µModule Regulator with 1% DC Accuracy

Charge Pump INV -2V 20mA 8-Pin MSOP T/R

Analog Devices LTC2067HMS8#PBF is a dual zero-drift operational amplifier with ultra-low 10 µA supply current per channel and 35 pA maximum input bias current at 25°C. It delivers 123 dB typical common-mode rejection ratio in an 8-pin SOIC package, making it ideal for precision sensor signal conditioning and low-power measurement applications.

Analog Devices LTC2067HMS8#TRPBF is a dual zero-drift operational amplifier with 10 µA maximum supply current and an ultra-low bias current of 35 pA at 25°C. Features 103 dB minimum CMRR and precision voltage feedback architecture in an MSOP-8 package. Available in tape-and-reel with worldwide in-stock shipping.