Integrated Circuit

ANALOG DEVICES - ADR395BUJZ-REEL7 - VOLTAGE REF, SERIES, 5V, TSOT-5

Up/Down Conv Mixer 26.5GHz 24-Pin CLLCC T/R

Analog Devices LTC6655BHMS8-2.048#PBF is an ultra-low-noise 2.048 V precision voltage reference in an MSOP-8 package. It delivers output accuracy of 2.0474 V to 2.0485 V with extremely low noise and drift, making it ideal for high-resolution ADC and DAC reference applications. Available worldwide for precision measurement and instrumentation designs.

Switching Voltage Regulators No Rsense Constant Frequency Current Mode Boost/Flyback/SEPIC DC/DC Controller

LT3489EMS8E#TRPBF is a current-mode PWM boost DC-DC converter accepting 2.6 V to 16 V input and producing up to 40 V output at 5 A switch current in an 8-pin MSOP with exposed pad. It delivers high-efficiency step-up conversion for applications requiring wide input range and high output voltage. Ideal for LED drivers, OLED bias supplies, and battery-powered handheld instruments needing compact, high-voltage boost regulation.

The LT8304HS8E#PBF is a micropower no-opto isolated flyback converter IC from Analog Devices featuring a 150V 3.6A integrated switch, operating from 3V to 100V input. It uses voltage-mode resonant control to regulate isolated outputs without an optocoupler, simplifying design. Available in an SO-8 package with RoHS-compliant construction for compact power supply designs.

Analog Devices LT3650EMSE-4.2#PBF is a high-voltage 2A monolithic Li-Ion battery charger IC with a 4.2V float voltage in a 12-lead MSOP package. It supports single-cell lithium battery charging with adjustable charge current from a wide input voltage range. Available from authorized distributors with worldwide shipping.

LDO Voltage Regulators 800mA ULN 1.5to5.1Vo Adj LDO

LTM8023MPV#PBF is an Analog Devices 36V, 2A step-down µModule switching regulator with current-mode PWM control and output voltage range of 0.8 V to 10 V. Input voltage range spans 3.6 V to 36 V, enabling broad power supply compatibility. Available from authorized distributors with competitive pricing and worldwide shipping.

Analog Devices LTC2333ILX-16#PBF is a buffered octal 16-bit successive approximation ADC sampling at up to 800ksps per channel with a software-configurable SoftSpan input range of plus or minus 10.24V and 30V peak-to-peak common mode range. Packaged in a 48-pin LQFP for high-channel-count signal acquisition. Available from stock worldwide.

LDO Regulator Neg -1.22V to -20V 0.2A Automotive 5-Pin TSOT-23 T/R

The LTC2333CLX-16#PBF is a buffered octal 16-bit successive approximation ADC from Analog Devices sampling at 800 ksps with ±10.24 V SoftSpan differential inputs and 30 Vp-p common-mode range in a 48-pin QFP package. It achieves 0.00458% maximum linearity error and 0.55 µs conversion time for high-channel-count data acquisition. Available from stock worldwide for industrial and instrumentation applications.

Precision Amplifiers 2x L Pwr Prec, pA In Op Amps

Precision Amplifiers Dual Precision Op Amp

The LTC1550LCS8-2.5#PBF is a low-noise switched-capacitor voltage inverter from Analog Devices that generates a stable -2.5 V output from a 2.7 V to 5.25 V positive input supply. Housed in an 8-pin SOIC package, it requires only small external capacitors and is designed for dual-supply op-amp, ADC reference, and LCD bias applications where a negative rail is needed without an inductor.

LDO Voltage Regulators 200mA L/N Negative LDO in Thin SOT

The AD8367S is a 500 MHz variable-gain amplifier (VGA) with a 45 dB linear-in-dB gain control range and an integrated square-law detector for RSSI output. It operates from a single 2.7 V to 5.5 V supply with a 50 Ω matched input. Available from Analog Devices in a small-outline package, in stock with worldwide shipping.

Voltage References uP Prec Shunt Volt Ref 1.25V

The LTC1550LCMS8-2.5#PBF is a low-noise switched-capacitor voltage inverter from Analog Devices that generates a -2.5V output from a 2.7V–5.25V input with minimal external components. Available in MSOP-8 package with RoHS-compliant Pb-free construction, in stock with worldwide shipping.

Charge Pump INV -2V 20mA 8-Pin MSOP

The LTC1550LCMS8-2#PBF is a switched-capacitor inverting charge pump regulator that converts a 2.7 V to 5.25 V input to a regulated -2 V output at up to 20 mA. Housed in an 8-pin MSOP package, it is ideal for generating negative bias voltages in LCD displays, op-amp circuits, and portable electronic designs.

The LTC4162EUFD-FAD is a 35 V, 3.2 A multi-cell LiFePO4 step-down battery charger with integrated PowerPath control and I2C telemetry in a 28-pin QFN package. It features programmable charge current, input voltage regulation, and real-time monitoring of voltage, current, and temperature via I2C. Available from stock with worldwide shipping.

The LTC1550LCMS8-2.5#TRPBF is an Analog Devices switched-capacitor charge pump voltage inverter that generates -2.5 V from a 2.7 V to 5.25 V input supply with up to 20 mA output current. Housed in a compact 8-pin MSOP package, it delivers regulated negative voltage without inductors. Available in tape and reel, lead-free packaging for modern PCB assembly.

The LTC4099EUDC#PBF is a USB power manager and battery charger IC from Analog Devices that combines input fault protection, power path management, and Li-Ion or Li-Polymer battery charging in a single 20-pin QFN package. It supports adjustable charge current and voltage thresholds to accommodate various battery configurations while delivering up to 1 A from a USB port. The device targets smartphones, tablets, portable medical instruments, and handheld industrial devices requiring integrated USB charging with robust fault protection.

Switching Controllers Isolated Flyback controller w/Light load

LTC3621HMS8E-3.3#PBF is a synchronous step-down switching regulator from Analog Devices with a fixed 3.3 V output, 1 A current capability, 1 MHz switching frequency, and 2.7 V to 17 V input range featuring ultralow quiescent current in an 8-pin MSOP-EP package. From $3.20, in stock, worldwide shipping.

Hot Swap Controller 1-CH 80V N-Channel Positive High Voltage Automotive 8-Pin MSOP T/R

The LTC6431AIUF-20#PBF is a wideband medium-power IF amplifier by Analog Devices, providing a fixed 20 dB gain with low distortion and 50 ohm input/output impedance matching. It is optimized for intermediate frequency signal chains in communications and radar receivers. Packaged in a compact QFN footprint for surface-mount assembly.

Analog Devices LTC4162EUFD-SADM#PBF is a multi-cell lithium-ion battery charger supporting up to 35V input and 3.2A charge current. It integrates telemetry and system power management in a 28-pin QFN package. Available in stock for worldwide shipping.

Analog Devices LT8391AIUFD#PBF is a integrated circuit for embedded electronics, industrial controls, instrumentation, and production BOM sourcing. It offers 28 pins, 60 V, -40°C to 125°C in Quad Flat No-Lead. From quote-based sourcing, buyers can request stock checks and worldwide shipping support.

LT8391AEUFD#PBF is an Analog Devices automotive-grade synchronous 4-switch buck-boost LED driver controller with 2800 µA supply current in a 28-pin QFN EP package. Designed for wide input-to-output voltage LED string driving in automotive lighting and industrial illumination systems.

Analog Devices LTC6431AIUF-20#TRPBF is a integrated circuit for embedded electronics, industrial controls, instrumentation, and production BOM sourcing. It offers 24 pins, 50ohm in Quad Flat No-Lead. From quote-based sourcing, buyers can request stock checks and worldwide shipping support.

Analog Devices LTC4162EUFD-LADM#PBF is a multi-cell lithium-ion step-down battery charger with PowerPath control, supporting up to 35 V input and 3.2 A charge current in a 28-lead QFN package with I2C telemetry. It provides programmable charge voltage, input current limit, and real-time fuel-gauge data over I2C. Available in stock worldwide with fast shipping.

The LT4294IDD#TRPBF is a Power over Ethernet Plus Plus (PoE++) Powered Device interface controller from Analog Devices. It supports IEEE 802.3bt Type 3 and Type 4 PD operation with up to 90W power delivery. Available in a 10-lead DFN package with competitive pricing and worldwide shipping.

LTC2850IMS8#TRPBF is a Analog Devices integrated circuit for industrial electronics and embedded systems. Key specs include 3.3 V, 8 pins, and TSSOP. From quoted pricing with in stock worldwide shipping support.

Op Amp Dual GP R-R O/P ±5.5V/11V Automotive 8-Pin MSOP T/R

Analog Devices LT4294IMS#TRPBF is a PoE PD (Powered Device) controller supporting IEEE 802.3bt Type 3 and Type 4 with up to 71.3W power delivery at 60V input in a compact 10-pin MSOP package. It integrates classification, detection, and power-on sequencing for single-port PoE++ endpoints without an external MOSFET or supervisor. Ideal for high-power IP cameras, wireless access points, and smart building IoT nodes requiring ultra-high-power PoE.

The LTC4162EUFD-SST#PBF is a multi-cell lithium-ion step-down battery charger IC from Analog Devices supporting up to 35 V input and 3.2 A charge current with PowerPath control and I2C telemetry. It integrates advanced battery health monitoring in a 28-pin QFN package. Available worldwide for portable industrial, medical, and multi-cell battery pack applications.

Single Supply, 24-Bit, Sigma-Delta ADC with ±10 V and 0 mA to 20 mA Inputs, Open Wire Detection

Analog Devices LTC2385CUH-18#PBF is an 18-bit, 5 Msps successive approximation ADC with a differential input range of ±4.096 V and a maximum linearity error of 0.0015%. It achieves a 0.31 µs maximum conversion time for high-throughput precision data acquisition. The 48-pin QFN package enables compact, high-channel-density measurement system designs.

Analog Devices LTC2385IUH-18#PBF is an 18-bit, 5 Msps successive approximation register ADC in a 48-pin QFN package. Delivers 0.0015% linearity error and 0.31 µs conversion time. Available from global distributors with worldwide shipping.

Comparator Single R-R O/P ±22V/44V Automotive 5-Pin TSOT-23 T/R

Use the download button to access the AD4111BCPZ-RL7 schematic symbol, PCB footprint, and 3D model.

LDO Regulator Pos 3.6V 3A 4-Pin(3+Tab) DDPAK Tube

LTC1417CGN#PBF is a 14-bit successive-approximation ADC with differential input range of ±2.048V, 2.25µs maximum conversion time, and serial output in a 16-pin SSOP package for precision data acquisition.

The LT3091HR#PBF is a negative adjustable LDO linear regulator from Analog Devices, delivering up to 1.5 A output current with an output voltage range of 0 V to -32 V. Featuring a 360 mV typical dropout voltage and automotive-grade 8-pin DDPAK package, it suits space-constrained industrial and automotive designs.

Analog Devices HMC232LP4 is a high-performance GaAs SPDT RF switch operating from DC to 12 GHz with 3.1 dB maximum insertion loss and 37 dB minimum isolation. It handles up to 30 dBm CW input power with a 50 Ω characteristic impedance in a compact 24-QFN package for microwave and communication systems.

Analog Devices LTC4058EDD-4.2#PBF is a standalone linear Li-Ion battery charger IC in a compact 8-DFN package with a 4.2 V float voltage. It delivers up to 600 mA programmable charge current with thermal regulation and automatic recharge. Available from authorized distributors with worldwide shipping.

LTC7000MPMSE#TRPBF is a fast 150V protected high-side NMOS static switch driver IC from Analog Devices, featuring Schmitt trigger inputs, open-drain outputs, and single-function gate drive capability. Ideal for industrial power switching and motor control applications.

Digital to Analog Converters - DAC 32-Ch 14-Bit 8uS IC