Integrated Circuit

Arm® Cortex®-M7 32-bit 550 MHz MCU, 1 MB flash, 564 KB RAM, Ethernet, USB, 3x FD-CAN, Graphics, 2x 16-bit ADCs, crypto/hash

32-bit Power Architecture MCU for Automotive Chassis and Safety Applications

Multiprotocol LPWAN 32-bit Arm® Cortex®-M4 MCUs, LoRa®, (G)FSK, (G)MSK, BPSK, up to 256KB flash, 64KB SRAM

Linear Voltage Regulator IC Positive Adjustable 1 Output 1.5A D²PAK

Analog Devices LTM8053EY#PBF is a 40V input, 3.5A/6A Silent Switcher step-down DC-DC µModule regulator with adjustable output from 0.97V to 15V using current-mode PWM control. It integrates inductor, MOSFETs, and passives into a compact BGA µModule package for low-EMI industrial and telecom power conversion.

Analog Devices LTC2296CUP#PBF is a dual-channel 14-bit 25 Msps low-power ADC in a 64-pin QFN package, offering simultaneous sampling with proprietary pipeline architecture and a 1 V differential analog input range. It delivers exceptional dynamic performance with 72 dB SNR and low 135 mW total power consumption at full speed. Available in stock from authorized distributors with worldwide shipping.

LTC2668HUJ-16#PBF is a 16-channel 16-bit SoftSpan DAC from Analog Devices with ±10 V output range and an integrated 10 ppm/°C maximum reference in a 40-pin QFN package. It uses a serial SPI interface with binary input coding for precision multi-channel voltage generation in industrial control and ATE systems. Available from stock with worldwide shipping.

LTC2946IDE#PBF is a high-voltage wide-range power monitor IC from Analog Devices, capable of measuring voltage, current, and power on rails from 2.7 V to 100 V with 12-bit resolution via an I2C/SMBus interface. It integrates 3 monitoring channels, adjustable alert thresholds, and energy accumulation registers in a compact 16-pin DFN-EP package. Ideal for server power management, automotive telematics, and industrial energy monitoring applications.

Supervisory Circuits Dual Supply Monitor with Selectable Polarity

LT1614IMS8#PBF is an Analog Devices inverting DC-DC converter generating negative outputs down to -24 V from a 0.92 V to 6 V input. It uses current-mode PWM control for fast transient response and stable regulation. Available in 8-pin MSOP package with worldwide shipping.

The LT1614IMS8#TRPBF is an automotive-grade inverting DC/DC switching regulator generating a single -24 V output from a 0.92 V to 6 V input using current-mode PWM control, housed in an 8-pin MSOP package for compact negative-rail generation in automotive and portable systems.

Linear Battery Charger Controller Li-Ion/Li-Pol/NiCd/NiMH 2000mA 4.2V 8-Pin MSOP Tube

Analog Devices LT1614CMS8 is a current-mode PWM inverting DC-DC converter that generates up to -24 V output from a 0.92 V to 6 V input supply. It uses an 8-pin MSOP package and integrates the switching transistor for compact negative rail generation. Available from stock worldwide in RoHS-compliant lead-free packaging.

The LTC3542ES6#TRMPBF is a synchronous step-down DC-DC converter from Analog Devices operating from 2.5 V to 5.5 V input and delivering an adjustable 0.6 V to 5.5 V output at up to 0.5 A in a 6-pin TSOT-23 package. It uses current-mode burst mode control for ultra-low quiescent current in battery-powered automotive and portable devices. Available worldwide for compact power management applications.

LT3797ELXE#PBF is a triple output LED driver controller IC from Analog Devices, supporting up to 6 LED segments per channel. It features wide input voltage range and high-efficiency PWM dimming control for demanding lighting applications.

The LT3094EMSE#TRPBF is a -20 V, 500 mA adjustable ultralow-noise negative LDO linear regulator from Analog Devices with a typical dropout voltage of only 235 mV and exceptional power-supply rejection ratio. It operates over a 2.3 V to 20 V input-output differential range in a 12-pin MSOP package. The device targets noise-sensitive analog and RF circuits, high-performance audio systems, and precision measurement instruments requiring a clean negative supply rail.

Analog Devices LTC1731EMS8-8.4#PBF is a linear battery charger controller supporting Li-Ion, Li-Pol, NiCd, and NiMH chemistries with up to 2000 mA charge current and 8.4 V termination voltage. It integrates adjustable threshold control in a compact 8-pin MSOP package. Available in tube packaging with RoHS-compliant lead-free finish for portable power designs.

LT8610AXMSE#TRPBF is an Analog Devices 42 V input, 3.5 A synchronous step-down switching regulator in a 16-pin MSOP-Exposed pad package with only 2.5 µA quiescent current in Burst Mode. It delivers high efficiency across a wide 3.2 V to 42 V input range, suiting automotive, industrial, and always-on IoT applications. From $6.80 in stock with worldwide shipping.

Supervisory Circuits Power Sequencer EN IC

The LTC4310CDD-2#PBF is an I2C hot-swap controller from Analog Devices supporting up to 400 kHz bus frequency in a 10-pin no-lead DFN package. It enables safe live insertion of I2C cards by eliminating bus lockup on card removal, making it essential for hot-pluggable modular system designs.

Analog Devices LTC4162IUFD-L42M#PBF is a 35 V / 3.2 A multicell lithium-ion step-down battery charger with integrated PowerPath management and I2C telemetry for real-time charge monitoring, housed in a compact 28-pin QFN package. Supports up to 4-series Li-ion cells for portable and industrial power designs. Available from authorized distributors with worldwide shipping.

Analog Devices LTC2963HUDC-1#PBF is a 0.5% accurate quad configurable voltage supervisor IC for multi-rail power sequencing and monitoring. It integrates four independently adjustable threshold channels in a compact QFN-20 package rated for H-grade extended temperature operation. Available with RoHS-compliant lead-free finish from authorized distributors worldwide.

Switching Voltage Regulators SOT-23 Boost Controller

Analog Devices LTM4608AIV#PBF is a low-VIN 8A DC/DC µModule regulator in an LGA-68 package, supporting 2.4 V to 5.5 V input and adjustable output from 0.6 V to 5 V with tracking, margining, and frequency synchronization features for multi-rail power systems.

LTC3632EMS8E#TRPBF is an Analog Devices automotive-grade synchronous step-down DC-DC converter with 4.5 V to 50 V input range and adjustable output from 0.8 V to 50 V at up to 20 mA. It uses hysteretic current-mode control in a compact 8-pin MSOP EP package. Available in tape-and-reel from authorized distributors with worldwide shipping.

The LT3020IDD#PBF is a 100 mA very low dropout linear voltage regulator from Analog Devices, featuring a maximum dropout voltage of only 285 mV at full load across the -40°C to +125°C industrial temperature range. It operates with input voltages as low as 1 V and is housed in an 8-pin DFN package for compact low-power designs. Designed for powering noise-sensitive analog and RF circuits in portable, battery-powered, and wearable applications.

The LTC4002EDD-8.4#PBF is a standalone linear Li-Ion battery charger IC by Analog Devices, designed for 2-cell packs with an 8.4 V charge voltage and up to 1.5 A charge current from a 22 V input. It integrates an adjustable threshold and complete charge control in a compact DFN-10 package. Suitable for portable devices and industrial battery management systems.

Analog Devices LTC4151HMS#PBF is an 80 V high-side power monitor IC with 1-channel current and voltage sensing, shutdown capability, and I2C interface, housed in a 10-pin MSOP package.

LTM8065IY#PBF is a 40V input, 2.5A Silent Switcher DC/DC step-down µModule regulator by Analog Devices, featuring ultra-low EMI and integrated inductor. Output voltage adjustable from 0.97V to 18V. Ideal for noise-sensitive industrial, communications, and instrumentation applications. From $8.50, in stock, worldwide shipping.

CAN Interface IC 5.7kV Isolated CAN-FD Transceiver

Analog Devices LT3020EDD#PBF is an ultra-low dropout linear regulator delivering 100 mA with 285 mV maximum dropout voltage. It operates over a -40°C to 125°C junction temperature range in an 8-pin DFN package. Suited for low-voltage always-on power rails in battery-powered and portable electronics.

The LTC4444IMS8E#PBF is an automotive-grade half-bridge MOSFET gate driver delivering 3 A peak output current with high-side and low-side drive capability in an 8-pin MSOP with exposed pad package. Key specs include Schmitt trigger inputs for noise immunity, non-inverting outputs, and AEC-Q100 automotive qualification for harsh-environment reliability. Ideal for synchronous buck converters, motor half-bridges, and other high-frequency switching applications in automotive and industrial systems.

2-Channel Dual ADC Pipelined 10Msps 12-bit Parallel 64-Pin QFN EP Tube

IC DSP 32BIT 333MHZ 136CSBGA

Analog Devices LTC2876HMS8E#PBF is a 60V fault-protected RS-485/RS-422 transceiver with PROFIBUS compatibility and differential Schmitt trigger inputs. It operates from 3V to 5V supply with full EIA-485 compliance in an 8-pin SOIC package. Designed for industrial fieldbus networks requiring robust noise immunity and cable fault tolerance.

Analog Devices LT1791AIS#PBF is a 60V DC, ±15kV ESD-protected RS-422/RS-485 half-duplex transceiver IC supporting industrial differential serial communication. Features differential Schmitt-trigger receiver inputs with failsafe for open, shorted, or terminated bus conditions. Available in a 14-pin SOIC package for robust multi-node industrial network designs.

Switching Voltage Regulators 400mA Synch, Boost Converter in SC70

Analog Devices ADF4355-3 is a wideband microwave PLL frequency synthesizer with integrated VCO covering 3.3 GHz to 6.6 GHz output frequency range, featuring fractional-N and integer-N modes with SPI control in a 40-pin QFN package. Ideal for local oscillator generation in microwave, radar, and wireless infrastructure equipment.

CAN Interface IC 5kV isoPower Isolated CAN-FD Transceiver

LT8606HMSE#PBF is a synchronous step-down switching regulator rated for 42 V input and 350 mA output current, featuring current-mode PWM control and an ultra-low 2.5 µA quiescent current in a 10-pin MSOP package. It accepts 3 V to 42 V input, making it suitable for automotive, industrial, and wide-input embedded applications.

Analog Devices LT3790HFE#PBF is a high-voltage synchronous 4-switch buck-boost controller supporting input voltages from 4.7V to 60V and output voltages from 0V to 60V. It features current-mode PWM control with seamless transitions between buck and boost modes. Available in a compact package for efficient power conversion.

Analog Devices LTC3115HFE-1#TRPBF is a 40V input, 2A synchronous buck-boost converter using voltage-mode PWM control with 2.7V to 40V adjustable input range. It provides regulated output even when input voltage crosses output voltage, making it ideal for wide-range supply rails. Suited for automotive, industrial, and battery-powered systems requiring seamless buck-boost operation.

Analog Devices LTC6102HVIMS8#TRPBF is a high-voltage zero-drift current sense amplifier in an 8-pin MSOP package, featuring 50 µV maximum input offset voltage and 0.02 µA bias current for precise high-side current measurement. It monitors currents on rails up to the high-voltage rating, suited for power management, battery monitoring, and industrial current sensing.

LDO Voltage Regulators 300mA CMOS Low-Dropout Regular

DAC 1-CH Segment 16-bit 10-Pin MSOP T/R

Analog Devices LTC3588IDD-1#PBF is a piezoelectric energy harvesting power supply IC in a 10-pin DFN package, accepting 2.7 V to 18 V input from piezo transducers and delivering regulated 1.8 V, 2.5 V, 3.3 V, or 3.6 V output. Integrates full-wave bridge rectifier and switching regulator for autonomous wireless sensor nodes. Available from stock worldwide with fast shipping.

Analog Devices LTC3588EMSE-2#PBF is a piezoelectric energy-harvesting power supply IC with adjustable output threshold, low quiescent current, and a full-wave bridge rectifier integrated in a 10-pin MSOP package with exposed pad. Available from stock with worldwide shipping.

Analog Devices LTC3588EMSE-1#PBF is a piezoelectric energy harvesting PMIC combining a full-wave bridge rectifier and synchronous buck converter in a 10-pin MSOP package. It accepts 2.7 V to 18 V input from piezo transducers and delivers selectable 1.8 V, 2.5 V, 3.3 V, or 3.6 V regulated output. Designed for wireless sensor nodes and self-powered IoT devices harvesting ambient mechanical energy.

Analog to Digital Converters - ADC Dual 10-Bit 105 MSPS

Dual Precision Op Amp