Integrated Circuit

Triple half-bridge gate driver

Gate Drivers Low voltage gate driver for driving three-phase brushless motors

The STMicroelectronics UC3846 is a current-mode PWM switching controller capable of driving outputs up to 0.5 A at switching frequencies up to 500 kHz, housed in a DIP package. It integrates cycle-by-cycle current limiting and slope compensation, making it a robust solution for push-pull, half-bridge, and full-bridge SMPS topologies.

Trench gate field-stop, 650 V, 75 A, high-speed HB2 series IGBT in a TO247-4 package

STMicroelectronics M24C64-FMN6TPP is a 64 Kbit (8 Kbyte) serial I2C EEPROM with 8-bit wide data bus, 400 kHz Fast mode I2C interface, and hardware write protection in an SO-8 150 mil package. Available from stock with worldwide shipping.

Arm® Cortex®-M7 32b 550 MHz MCU, 128 KB flash, 564 KB RAM, Ethernet, USB, 3xFDCAN, Graphics, 2x 16-bit ADCs, crypto/hash

Power Management Specialized - PMIC 14 Output Rails PMIC 4 Adjustable (COT) Buck SMPS converters BOOST with Bypass

STMicroelectronics ST10F273MR-4T3 is a 16-bit MCU from the ST10 CPU family, featuring a 12 MHz maximum clock frequency, 24-bit address bus, and 16-bit external data bus. It integrates on-chip ADC targeting automotive and industrial control applications with robust processing capability.

High-performance and DSP with DP-FPU, Arm Cortex-M7 MCU with 1 MByte Flash, 564 KBytes RAM, 550 MHz CPU, L1 cache, external memory interface, SMPS, subset of peripherals

STMicroelectronics STM32F427VIT7XXX is a 32-bit ARM Cortex-M4 MCU with 180 MHz clock, 2 MB Flash, and 100-pin LQFP package rated for industrial temperature. It features FPU, DMA, ADC, DAC, and extensive connectivity for advanced embedded applications. Available worldwide with fast shipping.

The STM32F030K6T6XXX is a 32-bit ARM Cortex-M0 microcontroller from STMicroelectronics running at up to 32 MHz with 32 KB Flash, 4 KB SRAM, 26 I/O lines, ADC, timers, and UART/SPI/I2C interfaces. It operates from a 2.4 V to 3.6 V supply and is housed in a 32-pin LQFP package. Designed for cost-sensitive embedded designs, it serves home appliances, motor control, and industrial sensor applications.

SOP-8

Automotive quad-line Transil™ transient voltage suppressor (TVS) for ESD protection

Multiprotocol LPWAN dual core 32-bit Arm® Cortex®-M4/M0+ LoRa®, (G)FSK, (G)MSK, BPSK, up to 256KB flash, 64KB SRAM

High voltage, precision, bidirectional current sense amplifiers

ARM® Cortex®-M4 STM32L4 Microcontroller IC 32-Bit Single-Core 80MHz 512KB (512K x 8) FLASH 64-LQFP (10x10)

Mainstream Arm Cortex-M4 MCU 170 MHz with 512 Kbytes of Flash memory, Math Accelerator, HR Timer, High Analog level integration

Ultra-low-power Arm® Cortex®-M4 32-bit MCU+FPU, 100DMIPS, up to 1MB Flash, 128 KB SRAM, analog, audio

UFQFPN-48

Mainstream Arm Cortex-M4 MCU 170 MHz with 32 Kbytes of Flash memory, Math Accelerator, Medium Analog level integration

32-bit Arm® Cortex®-M7 480MHz MCUs, 2MB flash, 1MB RAM, 46 com. and analog interfaces, crypto

Use the download button to access the STM32F730V8T6TR schematic symbol, PCB footprint, and 3D model.

Automotive CMF with ESD protection and 9 GHz bandwidth in QFN-10L Surface Mount 100mA

Current Sense Amplifiers High voltage, precision, bidirectional current sense amplifier

QFN-32

Multiprotocol wireless 32-bit MCU Arm®-based Cortex®-M4 with FPU, Bluetooth® 5.4 and 802.15.4 radio solution

Ultra-low-power Arm® Cortex®-M33 32-bit MCU+TrustZone®+FPU, 165DMIPS, up to 512KB Flash, 256KB SRAM, SMPS, AES+PKA

Low power dual operational amplifiers

Automotive 4 V TVS for BMS in SOD323 and SOT323

Development Boards & Kits - ARM STM32 Nucleo-64 development board STM32F446RE MCU, supports Arduino & ST morpho

Multiprotocol wireless 32-bit MCU Arm®-based Cortex®-M4 with FPU, Bluetooth® 5.4 and 802.15.4 radio solution

Automotive 8-bit MCU, with up to 128 Kbytes Flash, data EEPROM, 10-bit ADC, timers, LIN, CAN, USART, SPI, I2C, LQFP-64

Mainstream Arm Cortex-M0 Access line MCU with 32 Kbytes of Flash memory, 48 MHz CPU, motor control and CEC functions

STMicroelectronics L6234D is a 3-phase brushless DC motor controller delivering up to 2.5 A output current, housed in a 20-pin SOIC package, designed for variable-speed BLDC motor drives in hard disk drives, fans, and consumer appliance applications.

28 X 28 MM, 3.40 MM HEIGHT, ROHS COMPLIANT PLASTIC, QFP-144

Use the download button to access the STM8S103F2M6 schematic symbol, PCB footprint, and 3D model.

SOP, SOP8,.3

LQFP-100

MEMS Microphones Analog bottom port microphone with frequency response up to 80kHz

STMicroelectronics VN06SP-E is a single-channel, low-side motor driver IC in a 10-pin PowerSO package with built-in transient, thermal, and under-voltage protections. It supports a nominal peak output current limit of 0.18 A and a sink output current direction for reliable load switching. Available from authorized distributors with worldwide shipping.

Quad high-side smart power solid-state relay

N-channel 600 V, 0.094 Ω typ., 25 A, MDmesh™ DM6 Power MOSFET in a PowerFLAT™ 8x8 HV package

STMicroelectronics STM6718SYWY6F, Dual-Channel Voltage Supervisor 3V max., Reset Input 5-Pin, SOT-23

STMicroelectronics STM6717TGGWY6F, Dual-Channel Voltage Supervisor 3.15V max., Reset Input 5-Pin, SOT-23

Ultra-low-power Arm® Cortex®-M4 32-bit MCU+FPU, 100DMIPS, up to 128KB flash, 40KB SRAM, analog, ext. SMPS

1 A, low quiescent current, low-noise voltage regulator with soft start - Automotive grade

Ultra-low-power Arm®Cortex®-M4 32-bit MCU+FPU, 150 DMIPS, 1-MB Flash, 320-KB SRAM, LCD-TFT, AES+PKA, ext SMPS

Advanced 250 V three-phase BLDC controller with embedded STM32 MCU

Mainstream Arm Cortex-M0+ MCU with 16 Kbytes of Flash memory, 8 Kbytes RAM, 64 MHz CPU, 2x USART, timers, ADC, comm. I/F, 1.7-3.6V

Ultra-low-power 32-bit MCU Arm®-based Cortex®-M0+, up to 192KB Flash, 20KB SRAM, 6KB EEPROM, LCD, USB, ADC, DACs