LT6001IMS8#PBF Analog Devices Integrated Circuit (Small Outline Packages) In Stock
Analog Devices LT6001IMS8#PBF is a dual low-power rail-to-rail input/output op amp rated to 18V supply with 82 dB minimum CMRR and 10 nA maximum bias current. It suits automotive and industrial signal conditioning in an 8-pin MSOP package. Designed for battery monitors, sensor amplifiers, and low-voltage portable systems requiring wide supply tolerance.
- Manufacturer
- Analog Devices
- Package
- Small Outline Packages
- Pin Count
- 8
- Lifecycle
- ACTIVE
- Datasheet
- LT6001IMS8#PBF Datasheet PDF
- Category
- Integrated Circuit
- Price
- From $2.3000(MOQ 1)
- Temp Range
- -40.0°C to 85.0°C
- RoHS
- Compliant
- Lead Time
- 3–7 business days
- Shipping
- DHL Express · Worldwide
What are the key features of LT6001IMS8#PBF?
- Dual rail-to-rail input/output op amp with 18V maximum supply voltage
- 82 dB minimum CMRR (96 dB typical) for strong common-mode rejection
- Ultra-low 10 nA maximum bias current enabling high-impedance signal paths
- Automotive-grade qualified for reliable operation in harsh environments
- 8-pin MSOP package integrating two channels in a minimal footprint
What is LT6001IMS8#PBF used for?
The LT6001IMS8#PBF targets automotive body electronics, industrial field transmitters, and portable instrumentation that need a dual, low-power op amp with rail-to-rail swing up to 18V. Its low bias current and high CMRR make it effective for battery cell voltage monitoring, thermocouple signal conditioning, and 4–20mA loop transmitter front-ends. The MSOP-8 package and automotive qualification simplify integration into compact sensor modules and ECU designs.
What are the specifications of LT6001IMS8#PBF?
| Pbfree Code | No |
| Manufacturer Package Code | 05-08-1660 |
| YTEOL | 10 |
| Amplifier Type | OPERATIONAL AMPLIFIER |
| Architecture | VOLTAGE-FEEDBACK |
| Average Bias Current-Max (IIB) | 0.01 µA |
| Common-mode Reject Ratio-Min | 82dB |
| Common-mode Reject Ratio-Nom | 96dB |
| Frequency Compensation | YES |
| Input Offset Voltage-Max | 950 µV |
| JESD-30 Code | S-PDSO-G8 |
| JESD-609 Code | e3 |
| Low-Bias | YES |
| Low-Offset | YES |
| Micropower | YES |
| Number of Functions | 2 |
| Package Body Material | PLASTIC/EPOXY |
| Package Equivalence Code | TSSOP8,.19 |
| Package Shape | SQUARE |
| Package Style | SMALL OUTLINE, THIN PROFILE, SHRINK PITCH |
| Peak Reflow Temperature (Cel) | 260 |
| Power | NO |
| Programmable Power | NO |
| Qualification Status | Not Qualified |
| Slew Rate-Min | 5000V/us |
| Slew Rate-Nom | 15000V/us |
| Supply Current-Max | 0.024mA |
| Supply Voltage Limit-Max | 18V |
| Supply Voltage-Nom (Vsup) | 1.8V |
| Surface Mount | YES |
| Technology | BIPOLAR |
| Temperature Grade | INDUSTRIAL |
| Terminal Finish | Matte Tin (Sn) |
| Terminal Form | GULL WING |
| Terminal Pitch | 0.65mm |
| Terminal Position | DUAL |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Unity Gain BW-Nom | 50 |
| Voltage Gain-Min | 25000 |
| Wideband | NO |
| Package | Small Outline Packages |
Compliance & Regulatory
| RoHS Status | Compliant |
| Lead-Free | Yes (Pb-Free) |
| Moisture Sensitivity Level | MSL 1 |
| ECCN | EAR99 |
| HTS Code | 8542.33.00.01 |
| Country of Origin | Malaysia |
Where can I find the LT6001IMS8#PBF datasheet?
LT6001IMS8#PBF Datasheet DownloadOfficial datasheet from Analog Devices
What are equivalent replacements for LT6001IMS8#PBF?
No known alternates. Submit an RFQ and our team can suggest alternatives.
Frequently Asked Questions
How does the rail-to-rail I/O of the LT6001IMS8#PBF expand usable signal range in low-voltage systems?
Rail-to-rail input and output allow the LT6001IMS8#PBF to process and drive signals within millivolts of both supply rails, maximizing dynamic range on 3.3V or 5V supplies. For a 5V system, this means usable output swing from approximately 0.05V to 4.95V, compared to 0.5V to 4.5V for non-rail-to-rail amplifiers, directly improving ADC resolution and measurement accuracy.
For a 12V automotive sensor conditioning circuit, how does the LT6001IMS8#PBF handle supply transients?
With an 18V maximum supply rating and automotive-grade qualification, the LT6001IMS8#PBF withstands typical automotive load-dump transients and cold-crank voltage dips from 6V to over 16V without damage. Its 82 dB minimum CMRR also suppresses alternator ripple and ignition noise commonly seen on automotive 12V buses, keeping sensor outputs clean for ECU ADC inputs.
When does using a dual-channel LT6001IMS8#PBF reduce system cost versus two single op amps?
Combining two low-power amplifiers in a single MSOP-8 package cuts PCB area roughly in half compared to two individual SOT-23-5 units, and reduces the BOM to a single line item with one reel. For high-volume automotive or industrial production runs in the thousands of units, this simplification lowers placement cost per board and improves supply chain reliability by sourcing only one part number.
Related Guides
CSD87313DMS Synchronous Buck Power Stage Design Guide
Design a compact CSD87313DMS synchronous buck stage with practical guidance for loss, gate drive, PCB layout, EMI, thermal validation, and sourcing.
Aug 6, 2026
STEF05SGR eFuse Selection Guide for 5 V Overcurrent Protection
Choose STEF05SGR for 5 V overcurrent protection by checking current-limit margin, inrush, thermal loss, fault response, and sourcing.
Aug 6, 2026
C0402C103K3RACTU Selection Guide: Choosing a 10 nF 0402 MLCC
Select C0402C103K3RACTU by voltage margin, X7R behavior, tolerance, 0402 assembly risk, and qualified alternatives.
Aug 4, 2026
STM32H753VIT6 MCU Selection Guide: Memory, Package, Connectivity, and Security
Choose STM32H753VIT6 by evaluating memory architecture, LQFP-100 pin fit, connectivity, security, power, and sourcing tradeoffs.
Aug 4, 2026
Why Buy from FindMyChip
About Analog Devices
Analog Devices (ADI) is a global leader in high-performance analog, mixed-signal, and digital signal processing integrated circuits used in virtually all types of electronic equipment.
More from Analog Devices
LT3062EDCB#TRPBF
Small Outline No-lead
Integrated Circuit
LT3062EDCB#TRMPBF
Small Outline No-lead
Integrated Circuit
LT8641IUDC#TRPBF
Other
Integrated Circuit
HMC412AMS8GTR
Small Outline Packages
Integrated Circuit
LT3062HMS8E#PBF
Small Outline Packages
Integrated Circuit
LT3062IMS8E#PBF
Small Outline Packages
Integrated Circuit
| Qty. | Unit Price | Ext. Price |
|---|---|---|
| 1+ | $2.4213 | $2.42 |
| 500+ | $2.3423 | $1171.16 |
| 1000+ | $2.3000 | $2300.00 |
In Stock · 24h Response · Worldwide Shipping
Response within 24 hours · Worldwide shipping
“The anti-counterfeit verification gave us confidence we'd never had with other China suppliers.”
You May Also Like
ACS770ECB-200U-PFF-T
Allegro Microsystems
Integrated Circuit
ACS770KCB-150U-PFF-T
Allegro Microsystems
Integrated Circuit
MC33901WEF
NXP
Integrated Circuit
MC7808BDTRKG
ON Semiconductor
Integrated Circuit
PA94EC
Apex Microtechnology
Integrated Circuit
AP7315-28SR-7
Diodes Inc.
Integrated Circuit
74HCT245D
Nexperia
Integrated Circuit
CY62256VNLL-70ZXCT
Cypress Semiconductor
Integrated Circuit
EPM7032AETC44-4N
Intel
Integrated Circuit
EPM3512AQC208-10N
Intel
Integrated Circuit
EPM3256ATC144-7N
Intel
Integrated Circuit
EPM3256AQC208-7N
Intel
Integrated Circuit
EPM3256AQC208-10N
Intel
Integrated Circuit
EPM3128ATC100-7N
Intel
Integrated Circuit
EPM1270F256C4N
Intel
Integrated Circuit
EPF8282ATC100-4N
Intel
Integrated Circuit
EPF6016QC208-2N
Intel
Integrated Circuit
EPF6016ATC144-3N
Intel
Integrated Circuit
EPF10K30ATC144-3N
Intel
Integrated Circuit
EPC2TI32N
Intel
Integrated Circuit
EPC2LC20
Intel
Integrated Circuit
EP3SL150F1152C4N
Intel
Integrated Circuit
EP2SGX60DF780C5N
Intel
Integrated Circuit
EP2SGX60CF780C5N
Intel
Integrated Circuit