LTC7000IMSE-1#PBF Analog Devices Integrated Circuit (Small Outline Packages) In Stock
Analog Devices LTC7000IMSE-1#PBF is a fast 150 V protected high-side N-channel MOSFET static switch driver in an MSOP-12 package. It provides robust gate drive for high-voltage load switching with integrated protection against reverse current, overcurrent, and overvoltage events. Ideal for hot-swap controllers, industrial power switches, and server backplane load management up to 150 V bus voltages.
- Manufacturer
- Analog Devices
- Package
- Small Outline Packages
- Pin Count
- 12
- Lifecycle
- ACTIVE
- Datasheet
- LTC7000IMSE-1#PBF Datasheet PDF
- Category
- Integrated Circuit
- Price
- From $3.8100(MOQ 1)
- Temp Range
- -40.0°C to 150.0°C
- RoHS
- Compliant
- Lead Time
- 3–7 business days
- Shipping
- DHL Express · Worldwide
What are the key features of LTC7000IMSE-1#PBF?
- 150 V rated high-side NMOS gate driver enabling direct drive of large N-channel MOSFETs for efficient high-voltage load switching
- Integrated protection including reverse-current blocking, overcurrent limiting, and overvoltage fault detection for robust system safety
- Schmitt-trigger input with fast turn-on/turn-off drive capable of switching loads with sub-microsecond gate transition times
- Open-drain fault output for direct connection to system supervisory controllers or status LEDs without additional interface components
- Compact MSOP-12 package suitable for dense power management boards in server and industrial equipment
What is LTC7000IMSE-1#PBF used for?
The LTC7000IMSE-1#PBF is designed for high-voltage static load switching applications in industrial equipment, server rack power distribution units, and telecom systems where the bus voltage can reach 150 V. Its integrated protection logic makes it well suited for hot-swap cards and field-replaceable power supply modules in 48 V and 72 V distributed power architectures that require automatic fault isolation. Motor drive pre-charge circuits and programmable power distribution switches in factory automation also use this driver to control large N-channel MOSFETs with fast, reliable gate transitions.
What are the specifications of LTC7000IMSE-1#PBF?
| Pbfree Code | No |
| Manufacturer Package Code | 05-08-1871 |
| YTEOL | 8.5 |
| High Side Driver | YES |
| Input Characteristics | SCHMITT TRIGGER |
| Interface IC Type | BUFFER OR INVERTER BASED MOSFET DRIVER |
| JESD-30 Code | R-PDSO-G12 |
| JESD-609 Code | e3 |
| Number of Functions | 1 |
| Output Characteristics | OPEN-DRAIN |
| Output Polarity | TRUE |
| Package Body Material | PLASTIC/EPOXY |
| Package Equivalence Code | TSSOP12/16,.19,20 |
| Package Shape | RECTANGULAR |
| Package Style | SMALL OUTLINE, HEAT SINK/SLUG, THIN PROFILE, SHRINK PITCH |
| Supply Current-Max | 0.085mA |
| Supply Voltage-Max | 135V |
| Supply Voltage-Min | 3.5V |
| Supply Voltage-Nom | 10V |
| Supply Voltage1-Max | 135V |
| Surface Mount | YES |
| Technology | CMOS |
| Temperature Grade | AUTOMOTIVE |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Terminal Form | GULL WING |
| Terminal Pitch | 0.5mm |
| Terminal Position | DUAL |
| Turn-off Time | 0.07 µs |
| Turn-on Time | 0.07 µs |
| Package | Small Outline Packages |
Compliance & Regulatory
| RoHS Status | Compliant |
| Lead-Free | Yes (Pb-Free) |
| Moisture Sensitivity Level | MSL 1 |
| ECCN | EAR99 |
| HTS Code | 8542.39.00.01 |
| Country of Origin | Malaysia |
Where can I find the LTC7000IMSE-1#PBF datasheet?
LTC7000IMSE-1#PBF Datasheet DownloadOfficial datasheet from Analog Devices
What are equivalent replacements for LTC7000IMSE-1#PBF?
No known alternates. Submit an RFQ and our team can suggest alternatives.
Frequently Asked Questions
What voltage rating and protection features does LTC7000IMSE-1#PBF provide for high-side switching designs?
The LTC7000IMSE-1#PBF supports a maximum operating voltage of 150 V on the switch node, making it compatible with 48 V, 72 V, and 110 V bus architectures common in telecom and industrial equipment. It integrates overcurrent detection, reverse-current blocking, and an overvoltage fault path, which together protect both the external MOSFET and downstream load without requiring additional protection ICs in the power path.
In which server and industrial power management applications is LTC7000IMSE-1#PBF most commonly used?
This driver is commonly deployed in hot-swap controllers for server blade modules where a 48 V backplane must be switched under load without damaging inrush current spikes, typically limiting inrush to below 20 A per slot. Industrial programmable power distribution switches in 24 V and 48 V factory networks also use it to drive N-channel MOSFETs with drain voltages above what P-channel FETs can handle, reducing on-state losses by a factor of 3 to 5 compared to equivalent P-channel devices.
How does LTC7000IMSE-1#PBF compare to LTC4364 for protecting a 48 V bus load switch?
The LTC7000IMSE-1#PBF is a gate driver optimized for static switch applications where the MOSFET remains fully on or off, whereas LTC4364 is a surge stopper with active linear-mode clamping for transient protection. For a permanent 48 V bus isolation switch with NMOS driving loads up to 10 A, LTC7000IMSE-1#PBF offers lower gate-drive losses and simpler external circuitry, while LTC4364 adds surge clamping capability for lines with frequent voltage transients exceeding 60 V.
What external MOSFET gate charge capability does LTC7000IMSE-1#PBF support for fast load switching?
The LTC7000IMSE-1#PBF is designed to drive N-channel MOSFETs with gate charge (Qg) up to several hundred nanocoulombs, producing gate transitions in under 1 µs for typical power MOSFETs used in 48 V static switch designs. Its Schmitt-trigger logic input provides clean switching from 3.3 V or 5 V control signals, and the open-drain FAULT output with 10 kΩ pull-up allows direct interfacing to a 3.3 V microcontroller GPIO for fault monitoring without additional level-shift components.
Related Guides
CSD87313DMS Synchronous Buck Power Stage Design Guide
Design a compact CSD87313DMS synchronous buck stage with practical guidance for loss, gate drive, PCB layout, EMI, thermal validation, and sourcing.
Aug 6, 2026
STEF05SGR eFuse Selection Guide for 5 V Overcurrent Protection
Choose STEF05SGR for 5 V overcurrent protection by checking current-limit margin, inrush, thermal loss, fault response, and sourcing.
Aug 6, 2026
C0402C103K3RACTU Selection Guide: Choosing a 10 nF 0402 MLCC
Select C0402C103K3RACTU by voltage margin, X7R behavior, tolerance, 0402 assembly risk, and qualified alternatives.
Aug 4, 2026
STM32H753VIT6 MCU Selection Guide: Memory, Package, Connectivity, and Security
Choose STM32H753VIT6 by evaluating memory architecture, LQFP-100 pin fit, connectivity, security, power, and sourcing tradeoffs.
Aug 4, 2026
Why Buy from FindMyChip
About Analog Devices
Analog Devices (ADI) is a global leader in high-performance analog, mixed-signal, and digital signal processing integrated circuits used in virtually all types of electronic equipment.
More from Analog Devices
LT3062EDCB#TRPBF
Small Outline No-lead
Integrated Circuit
LT3062EDCB#TRMPBF
Small Outline No-lead
Integrated Circuit
LT8641IUDC#TRPBF
Other
Integrated Circuit
HMC412AMS8GTR
Small Outline Packages
Integrated Circuit
LT3062HMS8E#PBF
Small Outline Packages
Integrated Circuit
LT3062IMS8E#PBF
Small Outline Packages
Integrated Circuit
| Qty. | Unit Price | Ext. Price |
|---|---|---|
| 1+ | $9.2700 | $9.27 |
| 10+ | $6.2660 | $62.66 |
| 19+ | $5.0500 | $95.95 |
| 1000+ | $3.8100 | $3810.00 |
In Stock · 24h Response · Worldwide Shipping
Response within 24 hours · Worldwide shipping
“The anti-counterfeit verification gave us confidence we'd never had with other China suppliers.”
You May Also Like
ACS770ECB-200U-PFF-T
Allegro Microsystems
Integrated Circuit
ACS770KCB-150U-PFF-T
Allegro Microsystems
Integrated Circuit
MC33901WEF
NXP
Integrated Circuit
MC7808BDTRKG
ON Semiconductor
Integrated Circuit
PA94EC
Apex Microtechnology
Integrated Circuit
AP7315-28SR-7
Diodes Inc.
Integrated Circuit
74HCT245D
Nexperia
Integrated Circuit
CY62256VNLL-70ZXCT
Cypress Semiconductor
Integrated Circuit
EPM7032AETC44-4N
Intel
Integrated Circuit
EPM3512AQC208-10N
Intel
Integrated Circuit
EPM3256ATC144-7N
Intel
Integrated Circuit
EPM3256AQC208-7N
Intel
Integrated Circuit
EPM3256AQC208-10N
Intel
Integrated Circuit
EPM3128ATC100-7N
Intel
Integrated Circuit
EPM1270F256C4N
Intel
Integrated Circuit
EPF8282ATC100-4N
Intel
Integrated Circuit
EPF6016QC208-2N
Intel
Integrated Circuit
EPF6016ATC144-3N
Intel
Integrated Circuit
EPF10K30ATC144-3N
Intel
Integrated Circuit
EPC2TI32N
Intel
Integrated Circuit
EPC2LC20
Intel
Integrated Circuit
EP3SL150F1152C4N
Intel
Integrated Circuit
EP2SGX60DF780C5N
Intel
Integrated Circuit
EP2SGX60CF780C5N
Intel
Integrated Circuit