Texas Instruments

The SN74AHC74N-P2 is a dual D-type positive-edge-triggered flip-flop from Texas Instruments' AHC logic family. Each element features independent clock, set, reset, and data inputs with Q and Q-bar outputs, operating from 2 V to 5.5 V supply. Suited for clocked data storage, frequency division, and state machine applications.

The SN74AHC273PWR-P is an octal D-type flip-flop with clear from Texas Instruments, featuring 8 edge-triggered latches in a 20-pin TSSOP package. It operates from 2V to 5.5V supply with AHC-speed performance for low-power digital logic storage. Available in tape-and-reel stock worldwide with fast shipping.

Texas Instruments SN74AHC1G04DCKR-P is a single inverter gate operating from 2V to 5.5V supply with AHC-family high-speed CMOS logic. Features 5-pin SOT23 package with low propagation delay and wide voltage range. Available from stock with worldwide shipping.

SN74AHC14PWR-M is a hex Schmitt trigger inverter IC from Texas Instruments, providing six independent inverting channels with hysteresis for clean signal conditioning. Operates across a 2V to 5.5V supply range with high-speed AHC logic for noise-immune waveform shaping. Available in SOIC-14 package with worldwide shipping.

TVSOP-20

The SN74AHC138PWR-P is a 3-to-8 line decoder/demultiplexer IC by Texas Instruments, featuring active-low outputs, three enable inputs, and operation from 2 V to 5.5 V supply. Ideal for address decoding and data routing in logic systems. Available in TSSOP-16 package with worldwide shipping.

Flip-Flops Octal Edge-Trig D-Ty F-F W/3-State Otpt

Flip Flop 2 Element D-Type 8 Bit Positive Edge 48-BSSOP (0.295", 7.50mm Width)

The SN74AHC244PWR-P is a non-inverting octal buffer and line driver from Texas Instruments with 3-state outputs, supporting two 4-bit elements in a 20-pin TSSOP package. It features AHC-series high-speed CMOS logic with low power consumption and broad operating voltage range. Available in stock with worldwide shipping.

The SN74AHC1G09DCKR-P is a single 2-input AND gate with open-drain output from Texas Instruments in the AHC logic family, designed for 2 V to 5.5 V operation. It features a 5-pin SC-70 package for ultra-compact designs with low power consumption. Available from stock with worldwide shipping.

The SN74AHC32PWR-P is a quad 2-input OR gate IC from Texas Instruments featuring advanced high-speed CMOS logic with 4 independent channels in a 14-pin TSSOP package. It operates on a 2 V to 5.5 V supply with fast propagation delays for digital logic applications. Available from stock worldwide with fast shipping.

Texas Instruments SN74AHC1G02DCKR-P is a single 2-input NOR gate in SC-70-5 package operating from 2 V to 5.5 V with propagation delay of 8.5 ns typical. Delivers 8 mA output drive with AHC CMOS logic levels and industrial temperature rating. Available from stock with worldwide shipping.

LCC-16

SN74AHC14N-P2 is a hex Schmitt-trigger inverter from Texas Instruments operating over a 2V to 5.5V supply range in a through-hole DIP-14 package. It provides six independent inverting channels with hysteresis for clean signal edge conditioning and noise rejection. Widely available in stock worldwide for prototyping, industrial control, and digital logic applications.

Operating Range 2-V to 5.5-V VC

4-ch, 2-V to 5.5-V buffers with 3-state outputs

Use the download button to access the SN74ACT533NS schematic symbol, PCB footprint, and 3D model.

SN74AHC08N-P2 is a quad 2-input AND gate from Texas Instruments AHC logic family in 14-pin DIP package. Operates from 2V to 5.5V supply with high-speed CMOS performance and TTL-compatible inputs. Available from stock worldwide with competitive pricing.

SN74AHC138N-P2 is an integrated circuit by Texas Instruments. Key specs include Dual-In-Line Packages, 16 pins. From RFQ price checks to worldwide shipping, FindMyChip supports sourcing.

Inverter IC 6 Channel Open Drain 14-SSOP

Buffers & Line Drivers Octal Bfr/Drvr

Buffer, Non-Inverting 4 Element 1 Bit per Element 3-State Output 14-TSSOP

The SN74AHC125QPWRG4HT is an automotive-qualified quad bus buffer gate IC from Texas Instruments with 3-state outputs and active-low output enable controls. It operates from 2V to 5.5V supply voltage and is housed in a 14-pin TSSOP package with high-temperature HT rating. Available in stock worldwide with tape-and-reel packaging for automated assembly.

4-Bit Binary Full Adders With Fast Carry

The SN74AHC04 is a hex inverter logic IC from Texas Instruments' AHC CMOS family, featuring 6 independent NOT gates operating over a 2 V to 5.5 V supply range. It offers high-speed switching with low power consumption, making it suitable for signal buffering, clock inversion, and logic level conversion in portable consumer, industrial, and automotive digital systems.

SN74ACT32N. SOIC − D. Tube. SN74ACT32D. ACT32. SOIC − D. Tape and reel. SN74ACT32DR. ACT32. −40°C to 85°C. SOP − NS. Tape and reel. SN74ACT32NSR.

16-Bit Bus Termination Networks With Bus Hold Function

SN74AHC02PWR-M is a quad 2-input NOR gate in the AHC (Advanced High-speed CMOS) logic family, operating from 2 V to 5.5 V supply with high-speed switching and low power consumption in a 14-pin TSSOP package. It provides 4 independent NOR gates with TTL-compatible inputs and CMOS output levels suitable for 3.3 V and 5 V mixed-voltage bus designs. Designed for logic level translation, signal inversion, and general-purpose combinational logic in consumer electronics, industrial control, and embedded systems.

Logic Gates Quadruple 2-Input Exclusive-OR Gate

IC Channel

D-Type Transparent Latch 1 Channel 8:8 IC Tri-State 20-TSSOP

Texas Instruments SN74ACT244N-NG is an octal tri-state buffer and line driver in a DIP package using ACT logic for 5V operation with fast switching speeds. Available from stock with worldwide shipping.

8-ch, 4.5-V to 5.5-V inverters with TTL-compatible CMOS inputs and 3-state outputs

Element Bit per Element Output

Synchronous FIFO 128 (64 x 1 x 2) Uni-Directional 60MHz 9ns 28-SOIC

Flip-Flops Octal D-Ty Edge-Trig F-F W/3-State Otpt

54LS136 QUAD 2-INPUT EXCLUSIVE-O

The SN74ACT08N-NG is a quad 2-input AND gate from Texas Instruments in the ACT logic family. It provides four independent AND gates with TTL-compatible inputs and CMOS outputs, operating at 5V supply. Available in a standard DIP-14 through-hole package with worldwide shipping.

Use the download button to access the SN74AC534PW schematic symbol, PCB footprint, and 3D model.

Latches Octal D-Type Transp

D FLIP-FLOP, ABT SERIES, 1-FUNC,

10-Bit Addressable Scan Ports Multidrop-Addressable IEEE STD 1194.1 (JTAG) TAP Transceivers

Use the download button to access the SN74AC534NS schematic symbol, PCB footprint, and 3D model.

Flip Flop 1 Element D-Type 8 Bit Positive Edge 20-SOIC (0.295", 7.50mm Width)

Transceiver, Non-Inverting 2 Element 8 Bit per Element 3-State Output 48-SSOP

Buffers & Line Drivers Tri-State Octal

The SN74ABT2245NS is an octal bus transceiver with 3-state outputs in a DIP package, part of the ABT logic family for high-speed bidirectional 8-bit data bus interfacing. Available from Texas Instruments with worldwide shipping.

these devices contain four independent 2input orgates.

16-BIT REGISTERED TRANSCEIVERS WITH 3-STATE OUTPUTS

PM-64