Texas Instruments

SNJ54LS137J is a military-grade 3-to-8 line decoder/demultiplexer from Texas Instruments with integrated address latches in a 16-pin ceramic DIP package. It supports latched inputs and active-low outputs with 4 mA sink current capability for reliable logic decoding. Available from stock with worldwide shipping.

IC ADDRESSABLE SCAN PORT 24-SOIC

The SN74ABT540NS is an octal inverting buffer and line driver with 3-state outputs in a 20-pin SOIC package. Features ABT logic operating at 5V with high-speed switching and 64mA output current for driving heavy bus loads. Available from stock with worldwide shipping.

https://www.ti.com/lit/gpn/sn54s00

Texas Instruments SN74ABT843DWR is a 9-bit bus-interface D-type latch with clear and preset in a 24-pin SOIC package. ABT family device with active-low enable, 50pF load capacitance rating, and unidirectional bus drive capability for high-speed data bus applications. Available from stock worldwide with competitive pricing and fast shipping.

https://www.ti.com/general/docs/suppproductinfo.tsp?distId=26&gotoUrl=http%3A%2F%2Fwww.ti.com%2Flit%2Fgpn%2Fsn74abt620

SN65MLVD202BDR is a full-duplex M-LVDS transceiver by Texas Instruments supporting data rates up to 200 Mbps over differential bus lines. Key specs: 200 Mbps data rate, 3.3 V supply, 8-pin SOIC package. From competitive pricing, in stock with worldwide shipping.

Element Bit per Element Output

IC FF D-TYPE SNGL 8BIT 20DIP

ption The SN55LBC173 is a monolithic quadruple differential line receiver with 3-state outputs designed to meet the requirements of the EIA standards RS-422-A, RS-423-A, RS-485, and CCI

Typical VOLP (Output Ground Bounce) < 1 V at VCC = 5 V, TA = 25°C

Use the download button to access the SN65MLVD047PWR schematic symbol, PCB footprint, and 3D model.

16-Bit Edge-Triggered D-Type Fflip-Flops With 3-State Outputs

SN65LVDS051IDRG4AN is a high-speed LVDS differential line driver and receiver IC from Texas Instruments, designed for automotive and industrial applications with data rates up to 400 Mbps. It integrates one driver and one receiver in a compact 8-pin SOIC package with failsafe open, short, and terminated inputs. Available in stock worldwide with industrial temperature grade reliability.

HIGH-SPEED CONTROLLER AREA NETWORK (CAN) TRANSCEIVERS

MULTIPOINT-LVDS QUAD DIFFERENTIAL LINE DRIVER

The SN7406N-NG is a hex inverter buffer and driver with open-collector outputs and high sink current capability from Texas Instruments. It features six inverting channels rated for up to 40V open-collector output voltage and 40mA sink current per channel. Available in 14-pin DIP package, in stock with worldwide shipping.

Buffer, Multiplexer 1 x 1:8 Channel 250Mbps 48-TSSOP

IC REDRIVER USB 3.0 2CH 24VQFN

2/2 Transceiver Full RS232 20-SOIC

ACTIVE. TSSOP. DGG. 48. 2000. RoHS & Green. NIPDAU. Level-2-260C-1 YEAR. -40 to 125. 65LVDS86AQ. SN65LVDS86AQDGGRQ

Texas Instruments SN65LVDS93CTDGGTQ1 is an automotive-grade LVDS serializer converting 28 parallel inputs to 4 serial LVDS outputs at up to 1.904Gbps data rate in a 56-pin TSSOP package. It is designed for high-speed display and camera link applications requiring reliable differential signal transmission. Available from stock with worldwide shipping.

Dual multiplexed LVDM repeater

The SNJ55LVDS32J is a military-grade quad LVDS differential line receiver compliant with TIA/EIA-644, operating over a -55°C to +125°C temperature range. It features four independent differential input channels with a common-mode input range of 0 V to 2.4 V in a 16-pin ceramic DIP package. Available from authorized distributors with worldwide shipping.

SN65HVD1040QDRSV is an AEC-Q100 qualified industrial CAN bus transceiver from Texas Instruments with ultra-low power standby mode and bus wake-up capability, supporting data rates up to 1 Mbps. It operates from a 3.3 V to 5 V supply and features ±70 V bus fault protection. Designed for automotive and industrial networks requiring reliable CAN communication with sleep/wake power management.

14-BIT ASYNCHRONOUS BINARY COUNTERS

Use the download button to access the SN65DSI85ZXHR schematic symbol, PCB footprint, and 3D model.

SN65LBC031QDRG4 is a single-channel RS-485/RS-422 transceiver supporting data rates up to 1000 Mbps, featuring half-duplex operation, ±15 kV ESD protection, and automotive-grade qualification in SOIC-8 package. Suited for high-speed industrial and automotive serial communication buses.

1/8 Unit-Load Option Available (Up to 256 receiver enables. A low, less than 1 μA, standby Nodes on the Bus)

Differential Bus Transceiver

Extended Common-mode RS-485 Transceiver

54LS11 TRIPLE 3-INPUT POSITIVE-A

Military single 8-input, 4.5-V to 5.5-V bipolar NAND gate

Notebook Computer Interface 64-NFBGA (5x5)

SN64BCT244NSR is a non-inverting 8-bit bus driver from Texas Instruments featuring two 4-bit sections with 3-state outputs and active-low output-enable control. The BCT-family device supports unidirectional bus driving with power-off disable to allow live insertion without bus contention. Housed in a 20-pin SOIC package, it targets backplane, memory, and CPU-to-bus buffering in embedded and industrial systems.

Texas Instruments SNJ55LBC175J is a quadruple low-power differential line receiver with Schmitt trigger inputs, supporting EIA-422, EIA-423, EIA-485, and V.11 standards, in a 16-pin ceramic DIP package for military and industrial use.

Use the download button to access the SN55LBC174J schematic symbol, PCB footprint, and 3D model.

54HC166 PARALLEL-LOAD 8-BIT SHIF

54LS51 AND-OR-INVERT GATES

DUAL 4-INPUT POSITIVE-NOR GATES

54HC365 HEX BUS DRIVERS WITH 3-S

Buffer/Line Driver 6-CH Inverting 3-ST CMOS 16-Pin CDIP Tube

Use the download button to access the SNJ54S112J schematic symbol, PCB footprint, and 3D model.

SNJ55LBC172J is a quadruple low-power RS-485 differential line driver IC in a 16-pin ceramic DIP package, rated for -55°C to 125°C military temperature range. It integrates 4 independent drivers with differential outputs compliant with EIA-485 for multi-drop bus transmission. Designed for military, aerospace, and rugged industrial serial communication systems requiring extended temperature operation.

Buffers & Line Drivers Dual Differential Line Driver 14-CDIP -55 to 125

High dc Noise Margin

SNJ54HC165J is an 8-bit parallel-load shift register from Texas Instruments in a 16-CDIP ceramic package, operating across -55°C to 125°C with a maximum clock frequency of 21 MHz and 50 pF load capacitance.

54HC191 SYNCHRONOUS 4-BIT UP/DOW

Use the download button to access the SNJ55114J schematic symbol, PCB footprint, and 3D model.

SNJ54AHC74J is a dual positive-edge-triggered D-type flip-flop from Texas Instruments in a 14-pin ceramic DIP package. Features complementary Q and Q-bar outputs, asynchronous clear and preset, and 50 pF load capacitance rating. From $8 in stock worldwide shipping.