SN74ACT244N-NG Texas Instruments Integrated Circuit (Dual-In-Line Packages) In Stock
Texas Instruments SN74ACT244N-NG is an octal tri-state buffer and line driver in a DIP package using ACT logic for 5V operation with fast switching speeds. Available from stock with worldwide shipping.
- Manufacturer
- Texas Instruments
- Package
- Dual-In-Line Packages
- Pin Count
- 20
- Lifecycle
- ACTIVE
- Datasheet
- SN74ACT244N-NG Datasheet PDF
- Category
- Integrated Circuit
- RoHS
- Compliant
- Lead Time
- 3–7 business days
- Shipping
- DHL Express · Worldwide
Key Features
- Octal (8-channel) tri-state output configuration enables shared bus connection with multiple devices by disabling outputs independently
- ACT logic family combines CMOS low power consumption with TTL-compatible input thresholds for mixed-voltage system integration
- High-speed line driver capability supports bus driving in microprocessor memory and I/O expansion applications
- Dual-in-line (DIP) package enables easy breadboard prototyping and through-hole PCB assembly for development and legacy designs
Applications
The SN74ACT244N-NG serves as an 8-bit bus buffer and line driver in microprocessor address and data bus systems, providing signal isolation and current amplification between the CPU and peripheral ICs. Its tri-state outputs make it essential in shared bus architectures such as memory expansion cards, backplane systems, and parallel port interfaces. The ACT family's TTL-input compatibility allows seamless use in mixed 3.3V/5V environments commonly found in legacy industrial control systems.
Compliance & Regulatory
| RoHS Status | Compliant |
| Lead-Free | Yes (Pb-Free) |
Alternate & Equivalent Parts
Compatible alternatives and drop-in replacements for SN74ACT244N-NG:
Frequently Asked Questions
What is the function of the SN74ACT244N-NG?
The SN74ACT244N-NG is an octal (8-bit) non-inverting tri-state buffer and line driver. It amplifies logic signals on a bus and can disable all outputs simultaneously using output-enable control pins, making it ideal for shared bus systems in microprocessor and memory interface designs.
What logic family does the SN74ACT244N-NG belong to?
The SN74ACT244N-NG is part of the ACT (Advanced CMOS TTL-compatible) logic family. ACT devices feature CMOS-level power efficiency combined with TTL-compatible input voltage thresholds, allowing them to interface with both 5V TTL and CMOS logic systems found in industrial and embedded electronics.
What package does the SN74ACT244N-NG use?
The SN74ACT244N-NG uses a Dual-In-Line Package (DIP), which is a through-hole format compatible with standard 0.1-inch pitch breadboards and PCB sockets. This package is widely used in prototyping environments and in legacy or ruggedized designs where through-hole components are preferred for mechanical reliability.
How many output channels does the SN74ACT244N-NG have and what are the output states?
The SN74ACT244N-NG has 8 output channels, each capable of three logic states: logic high, logic low, and high-impedance (tri-state). The high-impedance state disconnects the outputs from the bus, allowing multiple transceivers or buffers to share the same bus without signal contention.
What are typical applications for the SN74ACT244N-NG?
The SN74ACT244N-NG is commonly used to buffer and drive address and data lines in microprocessor systems, parallel interface cards, memory board expansion, and I/O port drivers. Its octal tri-state architecture is particularly useful in backplane bus systems where multiple boards share a common data or address bus.
Related Guides
TPS61291DRVR Selection Guide: Low-Quiescent-Current Boost Converters for IoT and Wearables
How to select the TPS61291DRVR and low-Iq boost converters for IoT, wearables, and coin-cell designs. Compares specs, packages, and alternatives from TI, ADI, and Microchip.
May 13, 2026
TMS5704357BZWTQQ1 Selection Guide: Choosing the Right TMS570 Automotive MCU Variant
Compare TMS570 automotive MCU variants by ASIL level, flash, package, and peripherals. Find the right fit from entry-level LQFP to the ASIL-D TMS5704357BZWTQQ1.
May 13, 2026
TI Hercules TMS5704357BZWTQQ1 Design Guide for Automotive ASIL-D and Industrial Functional Safety
Complete integration guide for the TI Hercules TMS5704357BZWTQQ1 dual-core lockstep Cortex-R5F MCU: lockstep CPU, ECC RAM, FlexRay/CAN-FD, and ASIL-D pitfalls.
May 12, 2026
PTN78000WAH Selection Guide: Choosing the Right 1.5 A 36 V Step-Down Power Module
Compare PTN78000WAH against PTN78000WAS, PTN78060WAH, and other 1.5A 36V step-down modules. Covers package, current rating, efficiency, and drop-in replaceability.
May 12, 2026
Why Buy from FindMyChip
About Texas Instruments
Texas Instruments (TI) is a global semiconductor company headquartered in Dallas, Texas. TI designs and manufactures analog and embedded processing chips used in industrial, automotive, consumer, communications, and enterprise systems.
More from Texas Instruments
In Stock · 24h Response · Worldwide Shipping
Response within 24 hours · Worldwide shipping
“Their engineering team helped us find a pin-compatible alternative when our original MCU went EOL.”