Texas Instruments

UCC2808AQDR-2EP

IC TRANSCEIVER FULL 2/2 16DIP

UCC1801J is a Texas Instruments current-mode PWM switching controller in an 8-pin DIP package with 8.2 V to 12 V input range and only 100 µA startup current. It integrates a gate driver and protection features for power-supply design. Available in stock with worldwide shipping.

The UCC2808AQDR-2G4Q1 is a current-mode PWM switching controller IC in an 8-SOIC package, operating from 4.3 V to 15 V input supply, designed for automotive-grade isolated and non-isolated DC-DC converter designs requiring precise duty-cycle control.

The UCC1802J883B is a current-mode PWM switching controller operating from a 9 V to 12 V input supply, housed in an 8-pin ceramic DIP package. It provides pulse-width modulation control for high-reliability DC-DC converters. Available in mil-spec 883B qualification for defense and aerospace power designs.

UCC25705DTR

J(R-GDIP-T16)

J(R-GDIP-T16)

UCC2580DTR-1

Regulator Output DC-DC Controller IC

UCC2806MTR

Switching Controllers Low-Power BiCMOS Current-Mode PWM 8-CDIP -55 to 125

AUTOMOTIVE 3-A, 120-V HALF BRIDG

Forward Converter Regulator Positive or Negative Output Step-Up/Step-Down DC-DC Controller IC 16-SOIC

Low-Side Gate Driver IC Non-Inverting 16-SOIC

UC1709J883B is a dual-channel MOSFET gate driver from Texas Instruments delivering 1.5 A per channel with a 40 V VDD rating, totem-pole outputs, thermal shutdown, and a regulated 5 V output in an 8-pin DIP package. It is mil-spec qualified for high-reliability applications. Available from stock with worldwide shipping.

UCC1805J883B is a low-power BiCMOS current-mode PWM controller in an 8-pin ceramic DIP package, operating from a 4 V to 12 V supply and designed for MIL-STD-883 grade switching power supply applications. It features cycle-by-cycle current limiting, soft-start, and programmable oscillator frequency for DC-DC converter designs.

UCC1806J883B is a low-power, dual-output current-mode PWM controller from Texas Instruments, designed for use in switching power supplies operating from an 8 V to 14.5 V input rail at a 12 V nominal bus. The device provides two complementary gate-drive outputs and supports pulse-width modulation with current-mode control for superior line and load regulation. Housed in a hermetically sealed 16-pin ceramic DIP, it meets MIL-883B reliability standards for defense and aerospace applications.

Texas Instruments 5962-9457501VEA is a low-power dual-output current-mode PWM controller operating from 8V to 14.5V input. Delivers precise pulse-width modulation for two independent power rails with current-mode control for fast transient response. Housed in a 16-pin ceramic DIP package qualified for military and high-reliability applications.

UC2714 COMPLEMENTARY SWITCH FET

Automotive 5.7kVrms, 4A/6A dual-channel isolated gate driver w/ EN & DT pins in DWK pkg for I

Automotive, 4-A, 6-A, 5.7-kVrms isolated dual-channel gate driver with enable

30V, 1A, 500KHz current mode PWM controller with 8.4V/7.6V UVLO 50% duty cycle, 40°C to 85°C

UC1706J883B is a dual-channel push-pull MOSFET gate driver IC by Texas Instruments in MIL-SPEC ceramic DIP package. Key specs: 2 independent totem-pole output channels, standard TTL-compatible inputs, 16-pin ceramic DIP. From $18.00, in stock with worldwide shipping.

Texas Instruments UC3705J is a single-channel MOSFET gate driver with 1.5 A source and sink capability, operating from 5 V to 40 V supply in an 8-pin ceramic DIP package. Features totem-pole output for fast gate charge delivery to power switching transistors. Available from stock worldwide with fast shipping.

Ballast Controller Controller 57kHz ~ 78kHz No 16-SSOP

UC2706J is a dual-channel push-pull MOSFET gate driver IC from Texas Instruments with totem-pole output configuration, supporting 2 independent drive channels in a 16-pin GDIP ceramic package. Designed for driving power MOSFETs in switching power supplies, motor drives, and DC-DC converter circuits requiring low-side gate control.

Bipolar CCM PFC controller supporting line freq. across 50Hz-400Hz range, 0°C to 70°C

Isolated DC/DC Converters Automotive, 500-mW, 3-kVrms isolated DC/DC module with integrated transformer

Isolated DC/DC Converters Automotive, 500-mW, 5-kVrms isolated DC/DC module with integrated transformer 16-SO-MOD -40 to 125

The UC2525BDW is a voltage-mode PWM controller IC supporting boost, flyback, forward, full-bridge, half-bridge, and push-pull converter topologies with an 8 V to 40 V input range. It delivers programmable switching frequency, soft-start, and dead-time control in a 16-pin SOIC package. Available from stock worldwide with RoHS-compliant e4 finish.

UC2854J is a Texas Instruments high power factor preregulator IC using current-mode PWM control. It operates from 15 V to 20 V input and integrates multiplier and error amplifier functions in a 16-pin DIP package. Available from stock with worldwide shipping.

UC1843A - CURRENT MODE PWM CONTR

Quad schottky diode array with 3-A peak Forward Current

Overvoltage Comparator, Optocoupler PMIC 8-SOIC

Low-Side Gate Driver IC Non-Inverting 8-SOIC

Dual schottky diode bridge with 3-A peak forward current

UC1707J883B is a dual-channel MOSFET gate driver IC with 1.5 A totem-pole outputs in a 16-pin ceramic DIP package, supporting standard CMOS/TTL input logic. Available in stock worldwide with fast shipping.

IC MCU 32BIT 256KB FLSH 100HTQFP

LDO Voltage Controllers High Efficiency Regulator Controller

5962-8761903VEA is a radiation-tolerant dual MOSFET gate driver from Texas Instruments (UC1707-SP), featuring 2-channel totem-pole outputs, standard CMOS/TTL-compatible inputs, and housed in a 16-pin ceramic DIP for space-grade and military power-converter designs. From $60 in stock worldwide shipping.

TPS92310 is an off-line primary-side LED driver controller with a single channel output, supporting flyback topologies. It provides accurate constant-current regulation without secondary-side feedback, operates from universal AC input, and is suited for offline LED lighting applications. Available in 10-pin MSOP package with RoHS compliance.

The UC2834J is a high-efficiency LDO linear regulator controller from Texas Instruments, operating over a wide 5 V to 36 V input range with under- and over-voltage fault alert and programmable delay. It features a single regulation channel, 16-pin CDIP ceramic package, and operates across -40°C to +85°C, making it suitable for industrial power supplies and voltage regulation in harsh environments.

UC2573DTR is a voltage-mode PWM step-down DC-DC controller IC from Texas Instruments operating from 4.2 V to 35 V input in an 8-SOIC package with adjustable output suitable for positive buck regulator designs. It features an integrated oscillator, error amplifier, and pulse-width modulation comparator enabling high-efficiency power conversion up to 35 V. Available from stock worldwide with fast shipping.

5962-8670401VPA is a space-grade, 500-kHz current-mode PWM controller by Texas Instruments supporting up to 30 V input and 1 A output. Key specs: 11 V to 28 V input range, 100% duty-cycle capability, 16-V/10-V UVLO thresholds, in an 8-pin Ceramic DIP package. Available from stock with worldwide shipping.

5962-8680603VEA is a military-grade current-mode PWM switching controller by Texas Instruments supporting 8 V to 40 V input. It drives buck, boost, flyback, forward, full-bridge, half-bridge, and push-pull topologies from a 16-CDIP ceramic package. Radiation-tolerant design suits space and defense power conversion applications.

IC MUX/DEMUX VID SW QUAD 16TSSOP

Switching Controllers Improved Current Mode PWM Controller 16-CDIP -55 to 125

Power-supply supervisory circuit

The 5962-8670408VPA is a space-grade current-mode PWM controller operating at up to 30 V and 500 kHz, with 8.4 V/7.6 V UVLO thresholds and 50% maximum duty cycle, housed in a ceramic 8-pin DIP package for high-reliability applications. It is available from specialized distributors serving defense and space programs.