Texas Instruments

The TLE2021MJGB is a precision voltage-feedback operational amplifier from Texas Instruments in a ceramic DIP package. It delivers 110dB typical CMRR, 0.07µA max bias current, and internal frequency compensation for stable high-accuracy signal conditioning. Available in stock with worldwide shipping.

Analog Front End - AFE Analog Front End for commercial smoke detector 38-HTSSOP -40 to 85

High speed high drive single operational amplifier

Use the download button to access the TPS92381PWPR schematic symbol, PCB footprint, and 3D model.

45-V LED backlight driver with three channels 120-mA output

Buck Switching Regulator IC Positive Fixed 1.8V 1 Output 6A 28-PowerTSSOP (0.173", 4.40mm Width)

The TPS73201QDBVRVS is an automotive-grade 250 mA low-dropout voltage regulator with high accuracy and reverse current protection in a 5-pin SOT-23 package. It is AEC-Q100 qualified for use in automotive electronics operating across wide temperature ranges. Available globally for compact in-vehicle power rail regulation.

The TPS65020ARHAR is a 6-channel PMIC integrating three step-down DC/DC converters and three LDOs with I2C control and dynamic voltage scaling in a compact QFN package. It delivers up to 1.5 A per DC/DC channel from a single-cell Li-Ion input of 2.7 V to 5.5 V. Available from authorized distributors with worldwide shipping.

Dual 8-bit programmable current LED drivers

Automotive 300-mA, off-battery (40-V), ultra-low-IQ, low-dropout voltage regulator with enable

Power Management Specialised - PMIC Integrated Power Management IC (PMIC) with 4 DC/DCs, 9 LDOs and RTC 98-NFBGA -40 to 85

Fault protected local interconnect network (LIN) transceiver with dominant state timeout

IC REG LINEAR 3.3V 2A 20HTSSOP

Device Operates from 3 V to 5.5 V Input Supply

750-mA, 10-V, low-dropout voltage regulator with enable & RESET with delay

IC REG LIN 1.8V 250MA SOT223-6

200-mA, high-PSRR, dual-channel low-dropout voltage regulator with enable

1-A, dual-channel ultra-low-dropout voltage regulator with power good & enable

Use the download button to access the TPS62250DRVR schematic symbol, PCB footprint, and 3D model.

E Ink®, Vizplex™ Display PMIC 48-VQFN (7x7)

Use the download button to access the TPS61187RTJT schematic symbol, PCB footprint, and 3D model.

Power Management IC (PMIC) for TI AM64x

TPS65921BZBHR is a power management IC for OMAP-based handheld and mobile devices in a 120-NFBGA package. Supports 2.7 V to 5.5 V input with USB PD control and multiple LDO rails. From $4.20, in stock, worldwide shipping.

3 DC-DC converters with Integrated FET & 2 USB Switches

Texas Instruments TPS628512DRLR is a 2.7 V to 6 V input, 2 A fixed-frequency current-mode PWM step-down converter with a -40°C to 150°C operating range in a compact 8-pin SOT583 package. It delivers regulated DC output with high efficiency for space-constrained applications. Available from stock worldwide with competitive pricing.

TPS65287RHAT is a three-channel synchronous buck converter from Texas Instruments, accepting 4.5 V to 18 V input, delivering 3 A on channel 1 and 2 A each on channels 2 and 3, with integrated load switch, push-button control, and current-mode PWM regulation in a 40-pin QFN package.

2.7-V to 6-V, 1-A, fixed-frequency, step-down converter in SOT583 package

TPS54394PWP-P is a synchronous step-down DC-DC converter by Texas Instruments. Key specs include a 4.5 V to 17 V input range, up to 3 A output current, and a compact 20-pin PowerPAD TSSOP package. Available from stock with worldwide shipping.

E Ink®, Vizplex™ Display, OMAP™ PMIC 48-VQFN (7x7)

IC REG CTRLR BUCK 32QFN

Switching Voltage Regulators 5.5-V 6-A synchronou s step-down convert

2.7-V to 6-V, 0.5-A, fixed-frequency, step-down converter in SOT583 package

Switching Controllers Lo Input 600kHz Freq Synch Buck Cntrlr

5962-9555001NXDR is a quad micropower LinCMOS comparator IC by Texas Instruments in a 14-pin SOIC package. Key specs: 4 independent comparators, 0.03 µA max bias current, 5000 µV input offset voltage, open-collector/open-drain outputs. From $8.00, in stock with worldwide shipping.

Use the download button to access the TPS628501DRLR schematic symbol, PCB footprint, and 3D model.

Switching Voltage Regulators 1.6V Out 1.2A Hi-Ef Step-Down Converter

IC REG DL BOOST/LNR SYNC 24VQFN

Switching Voltage Regulators 25µA quiescent current synchronous boost converter

Use the download button to access the TPS62111MRSAREP schematic symbol, PCB footprint, and 3D model.

IC LED DRIVER RGLTR DIM 16WQFN

Texas Instruments TL4051CQDBZRG4 is a precision micropower two-terminal shunt voltage reference with an adjustable output from 1.225V to 10V in a 3-pin SOT-23 package. Available from stock with worldwide shipping.

- Controller, DSP Voltage Regulator IC 2 Output 30-TSSOP

The TPS51206DSQR-P is a DDR termination regulator and reference voltage controller from Texas Instruments, designed to supply VDDQ and VTT rails for DDR2, DDR3, and LPDDR3 memory interfaces. It integrates a tracking linear regulator and a sink/source capable termination output, delivering up to 1.5 A continuous current in a compact 10-pin 2 mm × 2 mm SON PowerPAD package. Ideal for notebook, tablet, and embedded computing platforms requiring low-latency DDR power management.

CAN Interface IC 3-V to 18-V input, 6-A synchronous step-down voltage regulator with pulse skip mode 9-VQFN-HR -40 to 125

Buck Switching Regulator IC Positive Adjustable 0.9V 1 Output 8A 28-PowerTSSOP (0.173", 4.40mm Width)

SWIFT™ Converter, Distributed Power Systems Voltage Regulator IC 1 Output 28-HTSSOP

The TPS54310PWPR-P is a 3 A synchronous step-down DC/DC converter with an input range of 3.5 V to 5.5 V in a 20-pin PWP small-outline package. It integrates low-RDS(on) MOSFETs and supports adjustable output voltage. Available from stock with worldwide shipping.

Buck Switching Regulator IC Positive Adjustable 0.76V 1 Output 4A 8-PowerSOIC (0.154", 3.90mm Width)

Buck Switching Regulator IC Positive Adjustable 0.76V 1 Output 4.5A 14-TSSOP (0.173", 4.40mm Width) Exposed Pad

TPS54331DR-P is a 3 A synchronous step-down DC-DC converter from Texas Instruments, switching at 570 kHz with an input voltage range of 3.5 V to 28 V and featuring Eco-mode for improved light-load efficiency. The integrated high-side MOSFET and current-mode control enable a compact external component set, while the adjustable output voltage suits a wide range of digital and analog power rails. Housed in an 8-pin SOIC, it is ideal for industrial, telecom, and automotive point-of-load applications.