Texas Instruments

Use the download button to access the ISO7710QDRQ1 schematic symbol, PCB footprint, and 3D model.

Use the download button to access the TPS621361RGXT schematic symbol, PCB footprint, and 3D model.

NVDC I2C Battery Buck-Boost Charge Controller with System Power Monitor & Processor

60V 2A Industrial eFuse With Integrated Reverse-Input Polarity Protection

Use the download button to access the TPS62136RGXT schematic symbol, PCB footprint, and 3D model.

Use the download button to access the TMP100AQDBVRQ1 schematic symbol, PCB footprint, and 3D model.

SOIC-8

Voltage References Lo Vtg Adj Precision Shunt Regulator

Quadruple D-Type Flip-Flops With Clear

Use the download button to access the TMP116AIDRVR schematic symbol, PCB footprint, and 3D model.

Use the download button to access the INA233AIDGST schematic symbol, PCB footprint, and 3D model.

Use the download button to access the PGA460TPWQ1 schematic symbol, PCB footprint, and 3D model.

Enhanced Product Quadruple 2-Input Positive-And Gate

2-Channel ESD Protection Diode for USB Type-C and HDMI 2.0

USB Interface IC USB Type-C and USB PD Controller, Power Switch, and High-Speed Multiplexer 56-QFN -40 to 85

SOIC-16

Linear voltage regulator,LM317LM 37V,BP

Analog to Digital Converters - ADC 18-Bit, 1-MSPS, Single-Supply, SAR ADC Data Acquisition System with Programmable 16-TSSOP -40 to 125

TEXAS INSTRUMENTS - SN74LVCZ245APW - IC, BUS TRANSCEIVER, SMD, TSSOP20

TEXAS INSTRUMENTS - TLV431CLPE3 - VOLTAGE REF, SHUNT, 1.24V-6V, TO-226AA-3

Analog to Digital Converters - ADC 18-Bit 500kSPS Single-Supply SAR ADC Data Acquisition System With Programmable Bipolar Input Ranges 16-TSSOP -40 to 125

3.3-V ABT Quadruple Bus Buffers With 3-State Outputs

Dual 4-A MOSFET Driver with Enable

The LM25088MHX-1/NOPB is a wide input voltage, current-mode, non-synchronous buck controller from Texas Instruments supporting 4.5V to 42V input at a nominal 24V. It employs pulse-width modulation control and is housed in a 16-pin small outline package, making it suitable for high-voltage industrial DC-DC step-down power supply designs.

Use the download button to access the TPS22933ARSET schematic symbol, PCB footprint, and 3D model.

RS-422 Interface IC Dual Differential Drivers and Receiver

NE5532PE4 is a Texas Instruments integrated circuit for industrial electronics and embedded systems. It provides 8 pins for production layouts. From quote pricing with global sourcing support and worldwide shipping.

Series 3-Terminal Negative Regulators

18-Bit, 100-kSPS, 1-Ch SAR ADC with programmable (±12/±10/±6/±5/±2.5V) input ranges on +5V supply

Space saving 800-mA low-dropout linear regulator with internal current limit

Analog to Digital Converters - ADC 12-Bit 1.25MSPS Single-Supply SAR ADC Data Acquisition System With Programmable Bipolar Input Ranges 16-TSSOP -40 to 125

Analog to Digital Converters - ADC 12-Bit 500kSPS Single-Supply SAR ADC Data Acquisition System With Programmable Bipolar Input Ranges 16-TSSOP -40 to 125

14-Bit, 1-MSPS, 1-Ch SAR ADC with programmable (±12/±10/±6/±5/±2.5V) input ranges on +5V supply

1500 Mbps LVDS Dial High Speed Differential Driver

Inverter Schmitt Trigger 6-Element Bipolar 14-Pin SOP T/R

Dual general-purpose operational amplifier

Use the download button to access the LM1117MPX-3.3 schematic symbol, PCB footprint, and 3D model.

AND Gate 4-Element 2-IN CMOS 14-Pin SOIC T/R

OPAx317-Q1 Low-Offset, Rail-to-Rail I/O Operational Amplifier

Use the download button to access the ISO7720FQDRQ1 schematic symbol, PCB footprint, and 3D model.

3-V To 5.5-V Two Channel RS-232 Compatible Line Driver/Receiver

VQFN-14

1A Low Dropout Regulator

Automotive, Fault-Protected RS-485 Transceivers With 3.3-V to 5-V Operation

TEXAS INSTRUMENTS - TVP5147PFP - VIDEO DECODER, 10BIT, 30MSPS, HTQFP-80

Analog to Digital Converters - ADC 16B ADC w/ Int MUX Oscillator & Ref

16 MHz Ultra-Low-Power MCU With 256 KB FRAM, 8 KB SRAM, Low-Energy Vector Math Accelerator

The THS7530PWP is a fully differential, continuously variable gain amplifier from Texas Instruments with 300MHz (-3dB) bandwidth, voltage-feedback architecture, and 114dB typical CMRR for high-speed signal processing. Supports wide continuous gain adjustment via an analog control voltage in a compact TSSOP package. Available with RoHS compliance, competitive pricing, and worldwide in-stock distribution.

The CSD87313DMS is a dual N-channel power MOSFET synchronous buck stage. It offers a 30 V drain-source breakdown voltage, 17 A maximum drain current, and 67 mJ avalanche energy rating. From $1.10 in stock, worldwide shipping.

Use the download button to access the OPA552UA/2K5 schematic symbol, PCB footprint, and 3D model.