Texas Instruments

Use the download button to access the CSD19532KTT schematic symbol, PCB footprint, and 3D model.

Octal Buffer/Driver With 3-State OUtputs

Low-Noise Clock Jitter Cleaner with Dual Loop PLLs and Integrated 2.9 GHz VCO

40 to 4000 MHz 18dB RF Gain Block Amplifier with Powerdown Pin

Precision Micropower Shunt Voltage Reference

Automotive Catalog Low-Power Stereo CODEC with 10 Inputs, 7 Outputs, HP Amplifier and Enhanced Digit

TPS53313RGER is a 6 A synchronous step-down DC-DC converter with an integrated high-side and low-side power FET, accepting a 4.5 V to 16 V input and producing an adjustable output from 0.6 V to 11.2 V. It uses voltage-mode PWM control with a switching frequency up to 1.5 MHz and is housed in a 24-pin QFN package for high-density power supply designs.

120V Boot, 3-A Peak, High Frequency, High-Side/Low-Side Driver

Dual-Channel, Low-Power, High-Accuracy Voltage Detector

SOT-223, 6 PIN

High-Efficiency 20-A SWIFT™ Synchronous Buck Converter with Eco-mode™

ADS42xx Dual-Channel, 14-/12-Bit, 160/125/65 MSPS Ultralow-Power ADC

Quadruple 2-Input Positive-NOR Gates

TLVx376, 5.5 MHz, Low-Noise, Low Quiescent Current, Precision Operational Amplifiers

16-Bit, 1-MSPS, 1-Ch SAR ADC with programmable (±12/±10/±6/±5/±2.5V) input ranges on +5V supply

TSSOP-16

Hex Inverters

The SN74AUP2G125RSER is a dual bus buffer gate from Texas Instruments in the ultra-low-power AUP logic family, featuring 3-state outputs and active-low output enable control. It operates from 0.8V to 3.6V supply voltage with a maximum output current of 4mA and 30pF load capacitance support. Packaged in a compact 8-pin QFN for IoT, wearable, and portable electronics applications requiring minimal power consumption.

Use the download button to access the OPA2188AQDGKRQ1 schematic symbol, PCB footprint, and 3D model.

Dual Channel IF BTS Receiver with Signal Processing for multi-mode 3G+LTE

DP3T USB 2.0 High-Speed and Mobile High-Definition Link (MHL) (6.5GHz) Switch

Automotive Catalog 3-Line To 8-Line decoder/Demultiplexer

120V Boot, 3-A Peak, High Frequency, High-Side/Low-Side Driver

Use the download button to access the ISO122PE4 schematic symbol and PCB footprint.

Use the download button to access the TLV172IDCKT schematic symbol, PCB footprint, and 3D model.

LMP92064SDE/NOPB is an integrated circuit by Texas Instruments. Key specs include JESD-30 Code: R-PDSO-N16; JESD-609 Code: e3. From RFQ price checks to worldwide shipping, FindMyChip supports sourcing.

TL431 / TL432 Precision Programmable Reference

Use the download button to access the LMZ31710RVQR schematic symbol, PCB footprint, and 3D model.

60V Three-Phase Smart Gate Driver With Buck Regulator and Three Current Shunt Amplifiers

Nanopower, 1.8V, SOT23 Push-Pull Comparator with Voltage Reference

TEXAS INSTRUMENTS - TDC7201ZAXT - TIME TO DIGITAL CONVERTER, NFBGA-25

IC TRANSCEIVER FULL 2/2 16TSSOP

Use the download button to access the ISO7720QDRQ1 schematic symbol, PCB footprint, and 3D model.

4-Bit Dual-Supply Bus Transceiver with Configurable Voltage Translation and 3-State Outputs

Battery Management 3- to 5-Series Li-Ion and Li-Phosphate Ultra-Low-Power Stackable Battery Protector 20-TSSOP -40 to 85

SOIC-16

3.3-V Dual Channel USB3.1 GEN 1 Re-Driver, Equalizer

Flip Flops Dual CMOS

3.3-V ABT Octal Buffers/Drivers With 3-State Outputs

16/32 Bit RISC Flash MCU, Arm Cortex-R4, Auto Q-100

150-mA, 30-V, Low-Dropout Voltage Regulator

2 MP MIPI® CSI-2 FPD-Link III serializer for 2MP/60fps cameras & radar

TEXAS INSTRUMENTS - TLV1702AIDGK - COMPARATOR, OPEN COLLECTOR, VSSOP-8

Single 2-Input Exclusive-OR Gate

Translation - Voltage Levels SNGL Bit Dual Supply Bus Transceiver

20-V Fully Integrated Sync Boost with Load Disconnect

Use the download button to access the LMH3401IRMSR schematic symbol, PCB footprint, and 3D model.

PWM Controller

LF Reader IC

TEXAS INSTRUMENTS - MAX3221IDBE4 - RS-232 LINE DRIVER/RECEIVER, 3221