Texas Instruments

1A, 3MHz Buck Converter with I2C for Dynamic Voltage Scaling

Use the download button to access the BQ2022ALPR schematic symbol, PCB footprint, and 3D model.

1% Accuracy Adjustable Precision Shunt Regulator

Automotive 2.9V to 5.5V, 3MHz, 1.6A Buck Converter With 1.2V Fixed Output Voltage in 2x2 SON Package

FEATURES
Rail-To-Rail Output
VICR Includes Ground
Gain-Bandwidth Product ... 9 MHz
Supply Current ... 730 µA/Channel
Single, Duals, and Quad Versions
Ultralow Power Down Mode IDD(SHDN) = 4 µA/Channel
Specified Temperature Range −40°C to 125°C ... Industrial Grade
Supply Voltage Range ... 2.7 V to 5.5 V
Ultrasmall Packaging 5 or 6 Pin SOT-23 (TLV2630/1) 8 or 10 Pin MSOP (TLV2632/3)
Universal Op-Amp EVM (See SLOU060 for More Information)

-20V, P ch NexFET MOSFET™, single WLP 1.5x1.5, 26mOhm

6 Gbps AC Coupled to TMDS™/HDMI™ Redriver

Texas Instruments SN74AHC573DWR is an octal transparent D-type latch with 3-state outputs from the AHC/VHC family, featuring active-low output enable and 8mA output drive with 50pF load capacitance. It provides unidirectional 8-bit data latching in a 20-Pin SOIC package. Available from stock worldwide with fast shipping.

Automotive Dual, 2.2-V to 36-V, microPower Comparator

TEXAS INSTRUMENTS - SN74LVTH162374DGGR - FLIP FLOP, D-TYPE, 160MHZ, TSSOP-48

Use the download button to access the TLV7256IDDUR schematic symbol, PCB footprint, and 3D model.

600-kHz Synchronous Switch-Mode Li-Ion and Li-Polymer Host-Controlled Battery Charger

Use the download button to access the TMP75CQDGKRQ1 schematic symbol, PCB footprint, and 3D model.

Low-Power Single Buffer/Driver with 3-State Output

26V, Bidirectional, 350kHz Bandwidth, Low- or High-Side Voltage Output Current Sense Amplifier

High Power Flyback Controller with Primary-Side Regulation and Peak Power Mode

120V Boot, 3-A Peak, High Frequency, High-Side/Low-Side Driver

16-bit, 2-kSPS, 4-ch, low-power, small-size delta-sigma ADC with PGA, VREF, 2x IDACs & SPI interface

3.3-V 4-ppm/°C, 100-µA 6-pin SOT-23 series (bandgap) voltage reference

26V, 350kHz Bandwidth, Low- or High-Side Voltage Output Current Sense Amplifier

3.3V, Full-Duplex RS-485, 12kV IEC ESD, 20Mbps data rate, No Enables

16-Bit Buffer/Driver with 3-State Outputs

3MHz, 1.6A Step-Down Converter in 2x2mm SON Package, Vout=1.8V

Use the download button to access the TPS54824RNVR schematic symbol, PCB footprint, and 3D model.

Texas Instruments LP8501TME/NOPB is a 9-output multi-purpose LED driver with serial interface control in a 25-ball BGA package. It provides independent current control for nine LED channels via I2C or serial data input, enabling flexible RGB and status LED management in portable devices. Available from authorized distributors with worldwide shipping.

Quadruple Differential Line Driver

4-Channel I2C And SMBus Switch With Reset Functions

Single, Low Power, Rail-to-Rail Input/Output Operational Amplifier w/Shutdown

Use the download button to access the DRV110APWR schematic symbol, PCB footprint, and 3D model.

CSD17579Q3A 30 V N-Channel NexFET™ Power MOSFET

Dual-Channel, 14-Bit, 125-MSPS Analog-to-Digital Converter (ADC)

Quad Micropower Rail-To-Rail Input/Output Op Amp w/Shutdown

Use the download button to access the PTN04050AAS schematic symbol, PCB footprint, and 3D model.

Automotive Fault Protected CAN Transceiver With Flexible Data-Rate

Dual, Adjustable, 600mA and 1000mA, 2.25MHz Step-Down Converter with 1-Wire Interface in QFN

Sitara Processor: ARM9, LPDDR, DDR2, Display, Ethernet

Use the download button to access the SN65HVD76DR schematic symbol, PCB footprint, and 3D model.

3 Ch Supervisor with Over Current Detect for Switchmode Power Supplies

Dual, 5A, High-Speed Low-Side Power MOSFET Driver

33V Flat-Clamp Surge Protection Device

Use the download button to access the ISO7710FDR schematic symbol, PCB footprint, and 3D model.

1-Ohm SPST Analog Switch 5-V/3.3-V Single-Channel Analog Switch

Automotive Catalog Single 2-Input Positive-OR Gate

250mA Micropower Low-Dropout (LDO) Voltage Regulator

Single 2.8MHz, improved offset, 600uA/ch RRIO op amp

SN74LV374ATPWR is an octal D-type flip-flop bus driver IC from Texas Instruments in the LV/LV-A logic family. It supports up to 50MHz operation with independent output control and 50pF load capacitance in a 20-Pin TSSOP package. Available from stock worldwide with fast shipping.

Texas Instruments LM25066IAPSQE/NOPB is a system power management and protection IC with PMBus interface, supporting 2.9 V to 17 V input range in a 24-pin QFN package. It features programmable current limiting, voltage monitoring, and fault protection for telecom and industrial power systems. Available from authorized distributors worldwide with in-stock inventory and global shipping.

Use the download button to access the TPD13S523PWR schematic symbol, PCB footprint, and 3D model.

Automotive, 20-ppm/°C (max), 100-µA, 3-pin SOT-23 series voltage reference

Use the download button to access the SN74AUC2G04DCKR schematic symbol, PCB footprint, and 3D model.