Texas Instruments

Use the download button to access the TPS2042ADR schematic symbol, PCB footprint, and 3D model.

Flip Flop D-Type Pos-Edge 1-Element 8-Pin VSSOP T/R

The TPS650243RHBRG4 is an integrated power management IC from Texas Instruments designed for lithium-ion powered systems, combining two DC-DC converter channels with adjustable thresholds. It integrates charging, regulation, and supervisory functions in a 32-pin QFN package. Targeted at smartphones, tablets, and other portable consumer electronics requiring comprehensive power management.

Automotive, High Speed, Robust EMC Quad-Channel Digital Isolators

ToF-Based Long-Range Proximity and Distance Sensor Analog Front End (AFE)

High-accuracy digital temperature sensor with ±0.1°C precision and integrated non-volatile memory in a compact SOT-23 package. Features I2C/SMBus interface with programmable alerts and operates from 1.7V to 5.5V supply. From $2.00 in stock worldwide shipping.

TPS7A5201WQRTKRQ1 is an AEC-Q100 automotive-grade 2 A low-dropout linear regulator with a typical dropout of only 95 mV and ±1% accuracy across temperature. It accepts inputs from 1.1 V to 6.5 V and operates from -40 °C to 125 °C. Available from stock worldwide with fast shipping.

Operational Amplifiers - Op Amps Quadruple Oper Amplifier

Latches Octal Transparent

Latches Octal DTYPE Transparent Latches

16-Bit Edge-Triggered D-Type Flip-Flop With 3-State Outputs

IC LI-ION LDO CHRG MGMT 8VSSOP

The REG1117A-1.8G4 is a fixed 1.8V, 1A low-dropout linear voltage regulator from Texas Instruments in a 4-pin SOT-223 package. It delivers up to 1A output current with a maximum dropout voltage of 1.55V and input voltage range of 3.8V to 15V. Available from authorized distributors with fast worldwide shipping.

Use the download button to access the TPS2012D schematic symbol, PCB footprint, and 3D model.

Texas Instruments TLC2272AMDG4 is a dual rail-to-rail output op-amp with 0.8 nA maximum bias current and 70 dB CMRR in an SOIC-8 package. Designed for single-supply signal conditioning, it delivers precision amplification from 2.7V to 16V supply voltage.

Flip Flops Dual J K NEG Edge Triggered FlipFlop

I2C Logic Buffer 2.5V/3.3V/5V/9V/12V 8-Pin VSSOP T/R

High Performance Low Cost Rail-to-Rail Input/Output HV FET Op Amps

Lithium-ion Protection IC Family Offering Accurate Cell-by-cell V Monitoring

CMOS dual complementary pair plus inverter

Quadruple Differential Line Driver

Texas Instruments LM3302DRE4 is a quad differential comparator with 4 independent open-collector outputs in a 14-pin SOIC package. It operates from a single supply and delivers 20 mV maximum input offset voltage, suited for multi-channel threshold detection in automotive and industrial systems.

The TPS76915DBVTG4 is an ultra low-power 100mA fixed-output LDO voltage regulator from Texas Instruments in a compact SOT-23-5 package. Key specs: 1.5V fixed output, 2.7V to 10V input range, 1.2V dropout voltage. Available in stock with worldwide shipping.

SOT-23, 5 PIN

Driver 0.5A 2-OUT High Speed Inv 8-Pin SOP T/R

Dual MOSFET Drivers

Clock Generators & Support Products Network Clock Synchronizer 64-VQFN -40 to 85

High sensitivity (±2-mT), low voltage (up to 5.5-V) Hall effect latch

Texas Instruments LM2574N-ADJ is a simple step-down switching regulator with adjustable output voltage and 500 mA output current capability. It operates from 4 V to 40 V input with internal 52 kHz oscillator in a DIP-8 through-hole package. Available from stock worldwide for cost-effective non-isolated DC-DC conversion designs.

Flip Flop D-Type Bus Interface Pos-Edge 3-ST 1-Element 24-Pin PDIP Tube

Dual-Bit Dual-Supply Bus Transceiver With Configurable Voltage Translation Aan 3-State Outputs

Use the download button to access the TCAN1051HDRQ1 schematic symbol, PCB footprint, and 3D model.

LDO Regulator Pos 1.5V to 5.5V 0.75A 8-Pin SOIC T/R

The TCAN1051HGDRQ1 is an automotive-grade CAN bus transceiver from Texas Instruments supporting up to 5Mbps data rate with normal and silent operating modes. Operates from 5V supply in a compact 8-pin SOIC package meeting AEC-Q100 automotive qualification. Available from stock with worldwide shipping.

LIN Transceiver with Integrated Vreg 20kBd Automotive 8-Pin VSON EP T/R

The TPS77701DRG4 is an adjustable low-dropout (LDO) linear regulator from Texas Instruments capable of supplying 0.75 A output current with a typical dropout voltage of only 0.26 V in an 8-pin SOIC package. It covers an output voltage range of 1.5 V to 5.5 V, featuring 0.2% load regulation and a 125°C junction temperature rating for use in portable and industrial power designs.

Lithium-ion Protection IC Family Offering Accurate Cell-by-cell V Monitoring

Data Acquisition ADCs/DACs - Specialized CCD Vertical Clock Driver

LDO Regulator Pos 2.8V 0.05A 5-Pin SOT-23 T/R

Use the download button to access the SN74AXC1T45DEAR schematic symbol, PCB footprint, and 3D model.

Enhanced Product Piccolo™ 32-bit microcontroller

High sensitivity (±2-mT), low voltage (up to 5.5-V) Hall effect latch

SSOP-16

Texas Instruments XTPS61372YKBR is a synchronous boost converter with 16 V output, 3.6 A switch current, and integrated load disconnect in a compact BGA package. Enables high-efficiency step-up from single-cell Li-Ion supplies. Available from stock worldwide.

5V, 7A/5A Low Side GaN Driver With 60MHz/1ns Speed

Precision, 10-MHz, Low-Noise, Low-Power, RRIO, CMOS Zero-Crossover Operational Amplifier

Configurable Multi-Rail PMIC for Xilinx MPSoCs and FPGAs

PDS90C189TWRTDRQ1 is a Texas Instruments Integrated Circuit for industrial controls and power management. Key specs include 65 pins. Request quote pricing, in-stock sourcing, and worldwide shipping for production builds.

TPS79030DBVRG4 is a fixed 3 V, 50 mA positive LDO linear regulator from Texas Instruments with 115 mV typical dropout, 4 V to 10 V input range, and 0.018% max line regulation in a compact 5-pin SOT-23 package. From $0.60 in stock worldwide shipping.

Use the download button to access the TPS79028DBVT schematic symbol, PCB footprint, and 3D model.